-
Pump is consisting on multiple states:
* OnOff (mandatory) -> means we need a new role "switch.pump" to detect this device type?
* Dimmer (optional)
* Temperature measurement (optional)
* Pressure…
-
id like to changr rge nightscout reservoir remain, to the reservoir amount and not the IOB
i assume its this line of code
reservoir=rawdata["activeInsulin"]["amount"],
what should it be changed…
-
Water pump 2 is part of Zone 2, should be part of Zone 1 when breaking pressure bottle is used.
-
Hi
I have a F1145 that I want to control using Home Assistant and esphome (or modbus). Had a look inside and there are 2 controller boards in there (one for home and one for swimming pool I think) …
-
Based on our discussion with Jeff Munk, Tony, Scott, and I earlier this morning: using 30 W/ton for the pump power in the fan/pump adjustment factor is reasonable and consistent with what's in ANSI/RE…
-
Reporting client info: Client Information:
BYOND:515.1643
Key:devinxoptoh
## Round ID:
[7440](https://scrubby.melonmesa.com/round/7440)
## Testmerges:
- [[DNM] Plexora](https://github.com/Monke…
-
### The problem
When the pump is defrosting, the state shown in HA as "Unknown":
The portal shows this:…
-
After clicking (‘) and typing (cheat giveitem WID_Shotgun_Standard_Athena_SR_Ore_T03)
Clicking f2 and enter
Whenever I edit with my blue print it force pulls out the pump
If I use the pickax co…
-
Currently, the peristaltic pump config is calibrated for the off-the-shelf models recommended in the BOM. Meanwhile, there is an old syringe pump design that probably doesn't correspond to the new syr…
-
We should add this action
https://github.com/cicere/pumpfun-bundler