-
Moving my previous comment here @cmroche -
The current home assistant integration is not compatible with ducted heat pump systems. As per your previous message, it sounds like the base device libra…
-
Today I got the time to test v4.1.1.
And what shall I say? I love the HA implementation, thanks for that! :)
But what I could not find is the option to control the circulation pump of warm water d…
-
Hello,
This is not an issue but just a suggestion: why not controlling the pump via rs485? you can set the rpm as a percentage and the pump will reply with the watt usage. This is the way I control m…
-
Not an issue, just a note for the newer board revision (GDRD220525-12G).
I received the device in non-working condition from a friend; the pump doesn’t work. There are a few issues: a completely dead…
Sirse updated
2 weeks ago
-
I have a very weird setup admittedly, so bear with me. My system uses a Commander Pro for 2 temp probes and controlling an EK D5 pump (set in fan port 6), and I use a Lian Li fan controller (which is …
-
Could you add a thickness handle to the control point tool? So we can for vector layers control line thickness more precisely than with pump tool. I know Synfig has such handle, though in my experienc…
-
Do you guys know how to add relays so they can be controlled in Home Assistant? I need to add 1 relay to control the circulating pump. I've looked on the forums but don't see anywhere how to add it.
-
### HA core version
2024.11.2
### Current integration version
0.6.5
### Last known working integration version
0.6.5
### Device type and model
Heat Pump Wi-Fi Controller 171H120F (0) by Midea
…
-
### Feedback
Love your work on this project! I was wondering if it was possible to control ducted systems using this integration?
When I configure it in HA, I only have the main zone controller …
-
Hello,
First of all, let me congratulate on the great work that you did here.
Is there any chance to control the pump relay, but instead of turning on and off, also have the possibility to put i…