-
Hi,
I'm connected via usb to a FGW14-USB (mode 5) and I can see the port COM5 and if I connect with a serial monitor I can see packets getting received.
In eo_man I try to detect serial ports and …
-
### What happened + What you expected to happen
Hello, I am a new user to Ray and it is entirely possible I am doing this incorrectly.
I am attempting to parallelize a python script that takes…
-
I have a HWT 9073485 device, the python sdk seems like don't close serial port properly?
What should I do to close it properly so I can reopen the serial port without replug the imu?
I did try t…
-
On Unity3D you can access COM3-N, but you can't access the COM name because it is a bit tool native code.
At least not easily.
But in C# Console with the good package or Python is possible.
As …
-
### Description of Issue/Question
1) I am connecting to cisco switch via console port.
2) I am getting the below error :
> An Error Occured:
> Pattern not detected: '' in output.
>
> Things …
-
Example: Python code to read and send information on the serial port
https://github.com/EloiStree/2023_09_30_PythonToAndFromWindowSerial/tree/main
-
ESP32 flashing failure always get error 2?
```
C:\Users\jibun\AppData\Local\Programs\Thonny\python.exe -u -m esptool --port COM8 erase_flash
esptool.py v4.4
Serial port COM8
Connecting.........…
-
Hello,
I’ve been using Python code to control my NanoVNA and recently came across the pynanovna package. I’ve successfully controlled the NanoVNA using both my own code and your package (with minor…
-
Build: https://github.com/SylvainDe/DidYouMean-Python/actions/runs/11652701227
Jobs: https://github.com/SylvainDe/DidYouMean-Python/actions/runs/11652701227/job/32444230093
```
Python 3.14.0a1 (m…
-
### Describe the requested feature
Remove serial dependency, only have modbus tcp node.
### Motivation
I'm trying to install this node on a plc controller that comes with node-red and it does not …