-
Hello, thanks for mods, can u add ReBar support for F8 bios?
-
I previously mentioned this, but I want to open a new issue now.
It would be much more practical if the "Reinforcement Properties" component returned the geometry as it appears in the drawing mode,…
-
### Pre-Check ###
===> Fetching cowlib v2.12.1
===> Making request to get package cowlib from repo hexpm
===> Version cached at /home/oper/.cache/rebar3/hex/hexpm/packages/cowlib-2.12.1.tar is up…
-
Just flashed the newest release available on a system with quite a bit of hardware, was a bit stressful but working ok.
Mostly concerned with the Adaptec 16 drive raid card and it's configuration wit…
-
I thought I'd create a separate, more detalied issue about this, even tho' I mentioned it.
When ReBar is on and RT is enabled in Control, the game doesn't utilize the full GPU.
Disabling ReBar in vk…
-
#### The bug
When choosing "3" for rebar.version, the latest rebar 3 is selected while it was expected to have the latest rebar3 compatible with the selected OTP version (typically not 3.24.0 for O…
-
@BillDH2k
OK, 3 BIOSes are attached for Z620. All are based on J96. All modding is done with "MMTool Aptio V4". The microcode downgrade is inserted manually, by replacing the microcode module padde…
-
### The problem you're addressing (if any)
There are a few ways by which you can make use of an external GPU on notebook, mainly Thunderbolt and OCuLink.
There is a variety of modern graphics card…
-
Motherboard model: MSI Z390-A PRO (MS-7B98)
Motherboard chipset: Intel Z390 (Cannon Lake-H)
CPU Model: Intel Core i7-9700
Graphic card: PNY GTX 1660 Super
VRAM size: …
-
Does BlenderBim support Rebar modeling?
@Moult
@Andrej730