-
Illumination power for RGB LEDs is not correct. By values lower than 50 jump the LED power to high. The problem is the 5 bit value range for each LED power.
-
Zephyr has a LED driver https://github.com/zephyrproject-rtos/zephyr/blob/main/drivers/led/led_gpio.c which is suitable for single LEDs. There is however (IMHO) no good way to handle RGB leds.
**De…
-
Hi, I'm the developer of [GWE](https://gitlab.com/leinardi/gwe) and I'm looking for a way to control the RGB lighting of Nvidia cards under Linux.
Currently the `nvidia-settings` app only allows to…
-
Video showing:
Cannot turn off LED strip of RGB's using Kit B module :
https://www.youtube.com/watch?v=UvjEEua-A7g
-
NeoPixel or custom PCB
-
### Please describe your request.
I have a waveshare RP2040 Zero, it's basically a stripped-down Pi pico, it has almost all the same GPIOs as the Pi pico, in fact, I've tested it with some configurat…
-
The cherry keys can hold 3mm LEDs
I need to investigate what leds can be used and at what price.
-
Copied from discord
> I made an issue (#51) for the using the LED for error handling, probably worth discussing if more LEDs or an RGB LED (or multiple) should be added to the board. They should be…
-
There's a new linesensor that is based on RGB. It connects trough I2C and has white leds to have more consistent lighting and better/ more reliable results. The chip it uses is unknown for now, check …
-