-
Hi,
I'm using Rocrail (latest snapshop from today) connected to DCC-EX to get sensors feedback.
When I upload to an Arduino Mega the latest V5, Rocrail doesn't seem to recognize DCC-EX.
Using …
-
Rocrail has a feature to send a train to the home location at a certain battery level (https://wiki.rocrail.net/doku.php?id=loc-details-en#minimal_energy). In order to use this correctly MTC4BT should…
-
```
Attached a sketch to interface between RocRail and Railuino.
Is the maturity level from the attachment sufficient to add this sketch to the
library?
Regards,
Bert
```
Original issue r…
-
```
Attached a sketch to interface between RocRail and Railuino.
Is the maturity level from the attachment sufficient to add this sketch to the
library?
Regards,
Bert
```
Original issue r…
-
Because the number of CAB registers is limited to 12, a release command would be helpful for slot management in the host software. (JRMI, Rocrail,...)
ghost updated
8 years ago
-
Loco does not respond if two locos share the same Rocrail address in the MTC4BT configuration.
Find my config file below. Please notice that locos EST1 and EST2 share the same Rocrail address.
{…
-
```
Attached a sketch to interface between RocRail and Railuino.
Is the maturity level from the attachment sufficient to add this sketch to the
library?
Regards,
Bert
```
Original issue r…
-
```
Attached a sketch to interface between RocRail and Railuino.
Is the maturity level from the attachment sufficient to add this sketch to the
library?
Regards,
Bert
```
Original issue r…
-
*Sent by cyrille Pilon (pilon.cyrille@free.fr). Created by [fire](https://fire.fundersclub.com/).*
---
Bonjours,
J’ai une carte WeMOS Mega + WiFi R3 ATmega2560 + ESP8266 USB-TTL for NodeMCU Arduino…
-
*Sent by (dccextended@gmail.com). Created by [fire](https://fire.fundersclub.com/).*
---
## G. created a ticket
Name: G. de Haan
Email: gerarddhaan@kpnplanet.nl
Timezone: 0
Software: EX-Command…