-
### Describe the problem/bug
Installing RPi Power Monitor breaks mycodo cause theres dependency conflicts between the library and mycodo, when mycodo installs these deps for influxdb and urllib to …
-
I'm not sure which update caused it, it currently says I have 12.1 installed but I don't know if 12.0 ever installed and ran or if it was skipped. Anyway, after updating all my servers the service re…
-
With Bullseye RPi.GPIO is used. With Bookworm it uses rpi-lgpio and lgpio.
lgpio no longer uses interrupts for inputs. This means some cpu seconds for every input.
The official gpiod still uses inte…
-
Hi,
So I'm thinking of having a directory affiliated with a USB stick that I would insert on the RPi
be continuously monitored to see if there are any additional files/changes.
Would this watc…
-
output of `rpi-mqtt-monitor -d`
output:
```
:: rpi-mqtt-monitor
Version: 0.11.0-4-g0490991
:: Device Information
Model Name: Intel(R) N100
Manufacturer: GenuineIntel
OS: Debi…
-
I use pin 37, GPIO 26 as a flow switch input. It worked fine on RPI 3B+, Bullseye:
But, the Pin State i…
-
Fresh install of RPi OS and used the screen configuration program to rotate my attached touchscreen display to portrait mode. All works well and the settings are properly implemented on boot or resta…
-
We have set up ethernet in the RG room with a TPLink extender! It is on 192.168.0.254 on the network, with password `arcade`. It's hooked up to the network switch under the SDVX monitor, and that is h…
-
Spawned from issue #3: Monitor mode only listens to kegboards, but we've had some long-standing requests for RPI GPIO support. Add a trivial flow meter daemon for these pins.
mik3y updated
7 years ago
-
I am wondering if anyone has designed a case for this system. If there is something that works, can someone share a link to the design?
If not, maybe I can contribute to the project by designing on…