-
## Feature request
allow RTCM injection directly to a canbus/serial port without it needing to be encapsulated in mavlink, my understanding is that the rtcm data is already sent intact over mavli…
-
Hi there,
I intend to use [SKPOS](https://www.skpos.gku.sk/en/) provider to receive the RTCM corrections to Ublox ZED F9P module. Unfortunately, the corrections are not received due to connection dro…
-
Not an issue, but a suggestion.
It would be nice to be able to simply publish and consume [rtcm_msgs](https://github.com/tilk/rtcm_msgs) or similar in some admittedly more obscure set ups.
One s…
-
Hi Azurehappen,
Thanks for releasing the insightful project.
If I want to implement SSR-PPP with the TEXCUP data, is it possible to acquire the real time RTCM-SSR (orbit/clock correction, ionosphe…
-
I am failing to see any RTCM messages after running ntrip process on ros2 humble. Logs on SmartNet indicate that no connection was made when using the driver. Not sure what the issue might be. Any hel…
-
**Describe the bug**
RTCM MSM loss of lock indicator, assumption that the epoch time is the last reported lock indicator time.
This is a minor matter, just noted looking at the code, please clos…
-
Hi there!
First of all, thank you for sharing the code!
CORs network: Swift Navigation
Board: Ardusimple budget (Zed-F9p)
I ran into a issue of not receiving RTCM data from the server when run…
-
I will post instructions for reproducing the problem in a moment. Those instructions will have two parts. The first part will set up a software area based on fddaq-v4.4.4, and they will demonstrate …
-
NTRIP Servers, rtk2go in particular, will sandbox users that request rtcm corrections too often, but the NTRIP client is hard-coded to 10hz. Sandboxed users do not get usable correction data.
I hav…
-
Since Android doesn't currently support connecting to an RTK GPS over serial, and it may not be possible to connect multiple serial connection to QGC, would it be feasible to support a UDP connection …