-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
I'm using Solar2MQTT with an Effekta 5000 AX M1.
It works f…
-
**Describe the bug**
When using solar mode with `solar_max_import` parameter greater than 0, the EVSE tries to reach `solar_max_import` value instead of 0.
For example, if you set "current_min": 6…
-
Hi AlexxIT,
Finally I was able to properly configure my new, solar powered camera. Using the DVRIP configuration was the correct.
However, my camera is solar/battery powered and after some short …
-
The tRacket sensor currently depends on wired USB power. It would be massively beneficial if the sensor could be deployed long-term in locations where that isn't available; solar power seems like the …
-
Brief intro:
TODO
Tasks / Sub-Issues
- [ ] Docs and figuring out setup: https://github.com/mathias/projects/pull/4
- [ ] Review and tune + add setup steps, from: https://kittenlabs.de/blog/2024/09…
-
Hello, first of all I would like to thank you for your hard work.
I have a question or request for additional functionality. Namely I have two separate inverters that are reporting to my HA daily sol…
-
Mount a Meshtastic node up high with a large antenna. Potentially solar powered.
Hardware:
* Board: https://store.rakwireless.com/products/wisblock-meshtastic-starter-kit
* antenna: https://a.co/d/…
-
### Use Case
For setups with low-latency connections (e.g., local Modbus TCP and BLE API), users would benefit from the ability to set the Car Power Adjustment Interval more freely, potentially as lo…
-
## Version of the custom_component
2.1.1
## Configuration
algorithm:
initial_temp: 1000
min_temp: 0.1
cooling_factor: 0.95
max_iteration_number: 1000
devices:
- name: "Char…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
I have a solar inverter (Victor MAX 10.2) with two MPPTs. so…