-
I'm interested in adding support for the new AVR chips, 0/1/2-series tinyAVR and megaAVR, that have been released in the past few years. While overall the cores look a lot like classic AVR cores, ther…
-
And here we were all worried that Microchip was going to let AVR languish, and was just doing a capture -> woodshed sorta thing to take out a PIC competitor...
Microchip's AVR team has apparently …
-
I'd love to see the ability to program the fuses for the relatively new tinyAVR 0/1/2 and Atmega series (like mega3208/09, mega4808/09, AVR128DBxx. I use AVRDUDESS regularly for "mass" flashing (haha,…
-
Hi,
I am having quite a trouble figuring out how to compile the HV firmware from source. I tried following your custom toolchain, which finishes succesfully, however when I try to use:
`make -f Mak…
-
Test results from AVR128DB48, a flagship modern AVR
This went on a bit longer than I intended.
**The data**
| Wire Clock | Pullups | F_CPU | Fill time | Notes |
|--------…
-
Hello,
Is possible to support the attiny1614 more (ram/flash) ?
I get errors in make because the "USB_INTR_PENDING_BIT":
sbdrv/asmcommon.inc: Assembler messages:
usbdrv/asmcommon.inc:99: Error:…
-
1. The recording address of SIGROW_DEVICEID[012] is different for AVR_EA and AVR_EB. Therefore, you need to create separate binaries for each.
2. CLKCTRL of AVR_Ex is equivalent to tinyAVR/megaAVR se…
-
I installed it manually, but after the installation was successful, there was no development board model I needed. The model I needed was: ATtiny1604-SSN
Please tell me how should I operate?
![image…
-
https://drazzy.com/package_drazzy.com_index.json - SSL-certificate expired 3 days ago
Please renew your certifiacte, Arduino IDE is complaining and I don't know how to skip the SSL check in Arduino…
-
It would be good to adopt avrdude 7.1 release.
Reference: MegaCoreX has adopted avrdude 7.1 release.
https://github.com/MCUdude/MegaCoreX
mcuee updated
9 months ago