-
Hi!
Wonderful repo! The Host OS shouldn't matter, but I can't re-build your example for some reason.
I've pegged my Picosdk to the version 2.0.0 (this commit id [efe2103f9b28458a1615ff0960544797…
-
Hi,
When I run the bringup code, I cannot see the nodes on the network. If I SSH into the robot and run it I can control the robot, view it in Rviz2, etc. However, I cannot access the nodes elsewhe…
-
I've been using this firmware for around a year but around 20 days ago the LEDs changed, now only the orange LED is continuously lit. It's also opened an unprotected Wifi network that allowed full acc…
-
Altsore gives the Altserver could not be found error (1200) when refreshing apps when my iPhone is connected via wifi, refreshing via usb works. My IPhone is visible in finder over wifi and shows up i…
-
### What are you trying to do?
I'm a full stack developer who works out of coffee shops. I'm running a web server on my Mac that I'm trying to access on my iPhone, and my iPhone is connected via USB-…
-
### Background
The `CONFIG_USB_DEVICE_NETWORK_RNDIS` configuration option enables the USB Remote Network Driver Interface Specification (RNDIS) in Zephyr. This allows a device to appear as a networ…
-
I edited my `/boot/firmware/config.txt` and `/boot/firmware/cmdline.txt` how I always did, with dtoverlay=dwc2 and modules-load=dwc2,g_ether. Than I add a usb0-cfg configuration file to `/etc/network/…
-
Hello guys,
Great software, on my street, my question if we can forward some internet traffic on the same cable directly to the phone, on wifi I have lag for games, I have a connection phone PC of …
-
one at `192.168.7.2`(`usb0`), the other one at `192.168.6.2`(`usb1`). Both working, as far as I can tell, but the latter should be removed
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…