If you want to move the Z-axis up, for example to better access the build plate or for nozzle replacement, you have to click on the "Z up" button many times.
Even in your video tutorial for nozzle replacement, this can be seen how the button pressed 21 times, just to move the nozzle 15 cm up to the right height:
https://youtu.be/CqwwDyOkoVg?t=17
The same counts for the build plate position, to move it to the foremost position.
Expected behavior:
It would be great to have a larger movement option (maybe 50% of the total movement area, 100 mm or 150 mm).
Alternatively 2 more buttons:
"Center Z-axis"
"Remove build plate": Move Y-axis to foremost position" (which moves the Y-axis to the frontmost position, and the Z-axis to 50%).
Additional Information
This printer is really great, but this manual axis-movement by just 10mm is really annoying.
Description
Actual behavior:
If you want to move the Z-axis up, for example to better access the build plate or for nozzle replacement, you have to click on the "Z up" button many times.
Even in your video tutorial for nozzle replacement, this can be seen how the button pressed 21 times, just to move the nozzle 15 cm up to the right height: https://youtu.be/CqwwDyOkoVg?t=17
The same counts for the build plate position, to move it to the foremost position.
Expected behavior:
It would be great to have a larger movement option (maybe 50% of the total movement area, 100 mm or 150 mm).
Alternatively 2 more buttons: "Center Z-axis" "Remove build plate": Move Y-axis to foremost position" (which moves the Y-axis to the frontmost position, and the Z-axis to 50%).
Additional Information
This printer is really great, but this manual axis-movement by just 10mm is really annoying.