search

ArduPilot / SiK

Tools and firmware for the Si1000
BSD 2-Clause "Simplified" License
284 stars 232 forks source link

Failing to connect to SiK radio #78

Open vijaykoundinya opened 2 years ago

vijaykoundinya commented 2 years ago

failed to run uploarder.py

kaklik commented 2 years ago

Do you have some debug output to allow diagnostics of that problem?

DaniKaganovich commented 1 year ago

Also failed to connect. On both modules the same firmware. If ground module connected to PC and airmodule connected to Pixhawk 6C it begin lighting solid green after power on. at the same time ground module is blinking green. If I change Net ID on ground module to another (from 25 to 26) and save air module also become blinking green. In any case after copy to remote its not connecting

kaklik commented 1 year ago

Also failed to connect. On both modules the same firmware. If ground module connected to PC and airmodule connected to Pixhawk 6C it begin lighting solid green after power on. at the same time ground module is blinking green. If I change Net ID on ground module to another (from 25 to 26) and save air module also become blinking green. In any case after copy to remote its not connecting

As I understand the original point of the issue was a malfunction of uploarder.py In case you have another problem with SiK firmware, please open a different issue containing the detailed description and procedure to replicate the problem. Thanks.