Atem Switched saying disconnected after programming ESP8266

AronHetLam / ATEM_tally_light_with_ESP8266

Wireless tally light for use with ATEM switchers, which connects over WiFi, using an ESP WiFi module.

GNU General Public License v3.0

153 stars 39 forks source link

Atem Switched saying disconnected after programming ESP8266 #117

Open RevBryan opened 6 months ago

RevBryan commented 6 months ago

Hi - sorry if this is a daft question. I have built and programmed the ESP8266 for use with my Atem Television Studio HD Switcher (the same one in the diagram on the tally server image on the build page). After I switch on the switcher, then the tally light it still says the switcher status is disconnected if I log in to the tally light web control page. Am I missing something? the Atem Switcher has an IP and is switched on. It's also plugged into the router! Any help would be appreciated.

AronHetLam commented 6 months ago

I'd need some more details. Could you send a screenshot,details about your network config, such as switcher IP etc. And maybe logs output from the ESP (you're able to see logs via the web installer)?

Are you sure the switcher is accessible from your WiFi (try connecting from ATEM control software over the same WiFi).