HP Microserver N36L without network after update or, maybe, stuck on boot

AuxXxilium / arc

Arc is a customized Redpill Loader for DSM 7.x (Xpenology) with enhanced Hardwaresupport, Addons, guided (semi-automated) Installation and more. Multiple customization options are built-in. It is modified to run on different Hardware (Wiki for more Informations). Commercial use is not permitted and strictly forbidden!

https://auxxxilium.tech

GNU General Public License v3.0

2.07k stars 236 forks source link

HP Microserver N36L without network after update or, maybe, stuck on boot #737

Closed PRO100GREEK closed 11 months ago

PRO100GREEK commented 11 months ago

After update loader from 23.9.11a to 24.1.2 a system can't boot. Also on device list on my router a system is not displayed. I was tried directboot option, but there isn't any effect (i tried on arc-24.1.dev, arc-23.12.31, arc-23.12.10 and arc-23.12.1). If I downgrade the loader to 23.9.11a system will start normaly

Hardware HP ProLiant MicroServer Gen 7 CPU - AMD AthlonII NEO N36L Mainboard - proprietary from HP Chipset - AMD RS785E Network controller - HP NC107i PCIe Gigabit Server Adapter Storage controller - integrated on chipset

AuxXxilium commented 11 months ago

Do you have made a new config? or tried to restore your old? What way to update do you have used?

PRO100GREEK commented 11 months ago

Yes, I do. But I also tried to restore an old config via restore from code. Firstly, I tried upgrade loader from arc menu, then I tried update via rewrite a usb flash

AuxXxilium commented 11 months ago

reconfigure loader without backup and try again. your config is to old thats why a warning is shown while restore!

PRO100GREEK commented 11 months ago

I have tried configure loader without backup, but it haven't any effect

AuxXxilium commented 11 months ago

don't know what you doing wrong.

Report from my Discord:

Alexander_Kaden — 01.01.2024 17:56 Hardware

Type: HP N54L CPU: AMD Turion II Neo N54L, 2x 2.20GHz Chipsatz: AMD RS785E/SB820M RAM: 16GB Disks: 2x 4TB WD RED Network: HP NC107i mit Broadcom Chip HP Microserver Remote Access Card

DSM

Model: DS3622xs+ DSM Version: 7.2.1 Update 3 Arc Version: 23.12.31 Arc Patch: yes Macsys: hardware AME: working Drivesleep: untested

PRO100GREEK commented 11 months ago

I have tried DS3622xs+ but it haven't ant effect. I have tried any flash drives that i have but also no effect. I have tried flash usb drives on linux with etcher, set default settings on bios, select/deselect any modules, selecting different models (DS923+, DS1621+, DS3622xs+), select/deselect any addons but still no effect. On 23.9.11a system works fine, but after update it doesn't boot. All attempts that i have tried was without restore from backup from elder versions

I really want solve this problem, but i don't know, what going wrong

AuxXxilium commented 11 months ago

can you prodive full diag of arc loader?

arc - sysinfo - full diag

PRO100GREEK commented 11 months ago

I also have uploaded with code 2JJCNSV98

AuxXxilium commented 11 months ago

He tried latest versions, clean install, DS3622xs+ and it is working on N54L. We can't find the issue with your system.