Hi All, I wanted to try out QuickSilver on my Meteor65 Pro build that has SPI ELRS board. I was able to get everything flashed and setup. Gyro works in all directions, except for yaw though. Didn't think much of it until I went to try to fly. When I do a Yaw move it just continues to Yaw without stopping. I can yaw back in the other direction, but if I hold yaw it will just spin faster and faster.
No idea what's going on, but it seems like the firmware thinks that YAW is not working. It was working great with BF 4.3. Still want to give this a try, so want to find out if anyone has any ideas.
Action: Yaw in one direction then center stick
Expected: Yaw while stick is deflected stop Yaw when stick is centered
Actual: Yaw continues even after stick is centered.
Hi All, I wanted to try out QuickSilver on my Meteor65 Pro build that has SPI ELRS board. I was able to get everything flashed and setup. Gyro works in all directions, except for yaw though. Didn't think much of it until I went to try to fly. When I do a Yaw move it just continues to Yaw without stopping. I can yaw back in the other direction, but if I hold yaw it will just spin faster and faster. No idea what's going on, but it seems like the firmware thinks that YAW is not working. It was working great with BF 4.3. Still want to give this a try, so want to find out if anyone has any ideas.
BF target: BETAFPVF4SX1280 QuickSilver: betafpvf411rx_elrs.brushless.hex v0.95
Action: Yaw in one direction then center stick Expected: Yaw while stick is deflected stop Yaw when stick is centered Actual: Yaw continues even after stick is centered.