BlInitializeLibrary Failed / Synchronous Exception

[MikeDev101]

Setup:

• Tried both Windows 11 and Windows 10.
• Raspberry Pi 4B 2GB (Running bootloader 4fd8f1f3)
• Tried a SanDisk Edge 32GB (Class 10, A1, U1), also tried a USB3 to MSATA adapter with some Kingston 16GB mSATA SSDs (but attempted these steps again using the same SD card)
• Installed wor-flasher today, Nov. 29, 2023.
• Ran wor-flasher on Debian 12 on an iMac 13,2.

Procedure:

Tell us what you did, step by step. Be specific enough so that one of us would be able to replicate your setup.

1. Tried flashing Windows 11 onto my SanDisk Edge card, attempted boot. Didn't work.
2. Set the boot priority to the SD card. Still didn't work.
3. Installed Raspberry Pi OS Lite onto a spare USB and updated the firmware to the latest stable release. Tried again, didn't work.
4. Tried flashing Windows 10 on the SanDisk, rinse and repeat. Still didn't work.
5. Repeated 1, 2, and 4 using an mSATA USB drive. Nada.

Everything I've been doing thus far appears to check out (yes I am aware the mSATA SSD was not large enough but that doesn't excuse the fact that this error still appears regardless), so I'm at a loss of how to proceed.

[enaran74]

Same issue here on a Raspberry Pi 400