Retrieve CyberPower UPS data from PowerPanel!
Add..\ You should be able to add this repo to HASC.\ From there, add a new integration from the Devices and Integrations page for "PowerPanel".\ The config flow is broken, but...
161
is the default),Username
is the SNMP community/service name,10
seconds). Maybe 30 would work best.Add..\ In short, enable SNMPv1, add/enable a community name. Give it a unique name for HASIO, and optionally set the IP to your HASIO instance.\
I attempted to disable a bunch by default, but it seems that didn't work! First time writing a component, what can I say.
id | description | value(s) | OID |
---|---|---|---|
model |
Your UPS device model | str |
1.3.6.1.4.1.3808.1.1.1.1.1.1.0 |
name |
Your UPS friendly name in PowerPanel | str |
1.3.6.1.4.1.3808.1.1.1.1.1.2.0 |
power_rating |
UPS power rating (VA) | int |
1.3.6.1.4.1.3808.1.1.1.1.2.6.0 |
current_rating |
UPS current rating (A) | int |
1.3.6.1.4.1.3808.1.1.1.1.2.7.0 |
-- | -- | -- | -- |
battery_status |
UPS battery status | BatteryStatus | 1.3.6.1.4.1.3808.1.1.1.2.1.1.0 |
battery_time_on_battery |
Time on battery backup | int |
1.3.6.1.4.1.3808.1.1.1.2.1.2.0 |
battery_percentage |
Battery percentage | int |
1.3.6.1.4.1.3808.1.1.1.2.2.1.0 |
battery_runtime |
Remaining battery runtime | int |
1.3.6.1.4.1.3808.1.1.1.2.2.4.0 |
battery_replace_indicator |
Battery replacement indicator | BatteryReplaceIndicator | 1.3.6.1.4.1.3808.1.1.1.2.2.5.0 |
-- | -- | -- | -- |
input_voltage |
Utility input voltage | int |
1.3.6.1.4.1.3808.1.1.1.3.2.1.0 |
input_frequency |
Utility input frequency | int |
1.3.6.1.4.1.3808.1.1.1.3.2.4.0 |
input_line_fail_cause |
Utility input failure reason | InputLineFailCause | 1.3.6.1.4.1.3808.1.1.1.3.2.5.0 |
input_status |
Utility input status | InputStatus | 1.3.6.1.4.1.3808.1.1.1.3.2.6.0 |
-- | -- | -- | -- |
output_status |
Output status | OutputStatus | 1.3.6.1.4.1.3808.1.1.1.4.1.1.0 |
output_voltage |
Output voltage | int |
1.3.6.1.4.1.3808.1.1.1.4.2.1.0 |
output_frequency |
Output frequency | int |
1.3.6.1.4.1.3808.1.1.1.4.2.2.0 |
output_load |
Output load | int |
1.3.6.1.4.1.3808.1.1.1.4.2.3.0 |
output_current |
Output current | int |
1.3.6.1.4.1.3808.1.1.1.4.2.4.0 |
output_power |
Output wattage | int |
NONE (calculated by output voltage*current) |
-- | -- | -- | -- |
alarm_audio |
Alarm status. (This will become an input later, as it is configurable). | int |
1.3.6.1.4.1.3808.1.1.1.5.2.4.0 |
These are defined by the MIB/whatever PowerPanel throws out. I've simply read the MIB file.\
All values start a 1 and increment up by 1 each line. So, Unknown
for example is 1
.
The UPS battery status, whether it's within the "low battery" threshold as determined by your required shutdown time in PowerPanel.\
Unknown
: Unknown (batteries disconnected?)\
BatteryNormal
: Not critically low, able to provide power.\
BatteryLow
: Battery low and will be exhausted soon under the current load. Defined by the low battery runtime setting.
Value indicates whether the UPS batteries need to be replaced (as determined by PowerPanel).\
NoBatteryNeedsReplacing
: Battery does not need to be replaced.\
BatteryNeedsReplacing
: Battery needs to be replace. Replace your UPS battery as soon as possible.
Recommended to use InputStatus
for a more detailed reason on the utility failure, but this includes the SelfTest
reason!\
NoTransfer
: No transfer, on utility power.\
HighLineVoltage
: Input voltage over high transfer voltage.\
LowLineVoltage
: Input voltage under low transfer voltage (including no input).\
SelfTest
: UPS was commanded to do a self test.
Anything other than Normal
is going to kick the UPS into running off battery.\
Normal
: Normal utility power.\
OverVoltage
: Input voltage over high transfer voltage.\
UnderVoltage
Input voltage under low transfer voltage.\
FrequencyFailure
Invalid input frequency.\
Blackout
: No utility power.
Note: I can only guess for 2 of these. Use something like InputStatus\
Unknown
: Unknown (device connectivity lost?)\
OnLine
: Running off utility power.\
OnBattery
: Running off battery.\
OnBoost
: No idea.\
OnSleep
: No idea.\
Off
: Not running.\
Rebooting
: Rebooting?