deltadore_smart_router

C Driver for deltadore controller in smart router

build process

1. Checkout this project into somewhere, let's say "${prj_home}"
2. Make sure you have 'make' program installed

3. run command to make it, such as

   make clean all

4. You will get TestFDTI.out as the output

run it

The usage is

 sudo ./TestFDTI.out <device name> 

for example

sudo ./TestFDTI.out /dev/tty/USB0

interact with device

after you run into this program, will see a prompt

#

Input "help" will show you all commands:

#help
[help]  getTopology :
[help]      Show currently recognized network and nodes
[help]  registerNode :
[help]      registerNode <network>
[help]      Register new node into a network
[help]  deleteNode :
[help]      deleteNode <network> <node>
[help]      Delete node from network
[help]  controlLight :
[help]      controlLight <network> <node> <action>
[help]      action: on, off, ram-up, ram-down, stop, stand-out, alarm-pairing, toggle, preset-1, preset-2
[help]  queryLightStatus :
[help]      queryLightStatus <network> <node>
[help]      Query light device status
[help]  controlLightColor :
[help]      controlLightColor <network> <node> <red> <green> <blue>
[help]      red, green, blue: are integer between 0~255
[help]  queryLightStatus :
[help]      queryLightStatus <network> <node>
[help]      Query light device status
[help]  queryLightInfo :
[help]      queryLightInfo <network> <node>
[help]      Query light device info
[help]  controlRollerShutter :
[help]      controlRollerShutter <network> <node> <action>
[help]      action: up, down, stop, up-slow, down-slow
[help]  queryRollerShutterStatus :
[help]      queryRollerShutterStatus <network> <node>
[help]      Query roller shutter device status
[help]  queryRollerShutterInfo :
[help]      queryRollerShutterInfo <network> <node>
[help]      Query roller shutter device information
[help]  debugEnablePrintRead :
[help]      debugEnablePrintRead <true|false>
[help]      Enable the printing or not when read from serial port. This just used for debugging. 
[help]  exit:
[help]      close device and exit program

Enjoy.