Closed peteruithoven closed 8 years ago
Fullname: Ultimaker Original Plus Settings same as regular Ultimaker but with heated bed. In the start gcode, first heatup bed, then nozzle. (Otherwise the nozzle stays at 230 for 5+ minutes without extrusion.)
Remove comments after heatup commands, see: https://github.com/Doodle3D/WiFi-Box/issues/17
Fullname: Ultimaker Original Plus Settings same as regular Ultimaker but with heated bed. In the start gcode, first heatup bed, then nozzle. (Otherwise the nozzle stays at 230 for 5+ minutes without extrusion.)