it's been a while

[TheForge129]

I can't seem to get the particle accelerator to work... I built it right, I even used the weakest magnets, but it always explodes instantly

[Drillgon200]

Show build.

[TheForge129]

Have to build a new one due to blowing it up to test the new nuke fx with sildur's shaders Also, the plasma heater doesn't seem to turn into the machine even when i place the parts in the right spot, i have yet to test this with the fusion reactor

[TheForge129]

aight, here you go sorry about the hotbar, my f1 key isn't turning it off fsr

[UFFR]

I think it's because that recipe you're using requires an "analysis chamber" or whatever it's called.

-- UFFR

[TheForge129]

i made one

On Sat, Jan 9, 2021 at 3:48 PM UFFR notifications@github.com wrote:

I think it's because that recipe you're using requires an "analysis chamber" or whatever it's called.

-- UFFR

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Drillgon200/Hbm-s-Nuclear-Tech-GIT/issues/38#issuecomment-757372288, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQAFBGDJWRP6CIZMULODVLLSZDFLTANCNFSM4VWWB3HA .

[UFFR]

And you're sure it's set up properly? Or perhaps your accelerator needs to be larger as a whole.

On 1/9/21 4:58 PM, TheForge129 wrote:

i made one

-- UFFR

[TheForge129]

hydrogen, copper > positron and antiproton requires 160 coil strength, mine is big enough

[Drillgon200]

That accelerator core doesn't look like it's pointing the right way. Other people have managed to build this fine, so you must be doing something wrong.

About the plasma heater, darn, I thought I had fixed that one.

[TheForge129]

ah, that makes sense

On Sun, Jan 10, 2021 at 8:40 PM Drillgon200 notifications@github.com wrote:

That accellerator core doesn't look like it's pointing the right way. Other people have managed to build this fine, so you must be doing something wrong.

About the plasma heater, darn, I thought I had fixed that one.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Drillgon200/Hbm-s-Nuclear-Tech-GIT/issues/38#issuecomment-757596441, or unsubscribe https://github.com/notifications/unsubscribe-auth/AQAFBGH5NLVJ4XAUVGNC27LSZJQLFANCNFSM4VWWB3HA .

[Drillgon200]

Alright, fixed plasma heater. Was offsetting in the wrong place.

[Drillgon200]

The thing should still work, you just have to build it like this.