Allow voltage threshold alarm values below 4.1 volts OR set lowest NiMh voltage to 4.0 volts

ELynx / ddf-350-modding

My mods for DumboRC DDF-350 RC remote firmware(s)

GNU General Public License v3.0

9 stars 1 forks source link

Allow voltage threshold alarm values below 4.1 volts OR set lowest NiMh voltage to 4.0 volts #6

Closed ELynx closed 2 months ago

ELynx commented 3 months ago

For some reason, it is impossible to keep values below 4.1 volts before restarts. Investigation revealed a place where this may be inforced, but modding it did not solve the problem. This issue is a follow-up from #4 since NiMh alarm should be lower than 1 volt.

ELynx commented 3 months ago

Also, if someone can test at which voltage remote turns off, let me know, I will update indicator.

ELynx commented 2 months ago

Since I do not see a rush of interest to this, I will close this for now. Also, I expect that transmitter will not work below 4-something volts. I will also align NiMh mod to 4 volts as 0%.