search

EVA-3D / eva-main

Main repository of the EVA project
https://main.eva-3d.page/
Other
271 stars 49 forks source link

Cartesian and Idex blower [EP] #43

Closed themacboy closed 3 years ago

themacboy commented 3 years ago

First of all, I'm sorry to post it here, but the Cartesian repository looks close to post issues.

I noticed than cartesian and idex design use the 5015 blower, and it is too large to fit in my Ender 5 Plus, and probalbly others.

I like to know if is possible to get a blower 4020 version. (never used onshapes, currently learning FreeCad)

Or if it is compatible to use the coreXY version.

Thx in advance ! Great work, soon I will post my pictures.

pkucmus commented 3 years ago

I'll look for a guy who put EVA on an Ender 5 to he if he can help

pkucmus commented 3 years ago

Also this is a perfect place for those "EPs" :)

vellkan commented 3 years ago

First of all, I'm sorry to post it here, but the Cartesian repository looks close to post issues.

I noticed than cartesian and idex design use the 5015 blower, and it is too large to fit in my Ender 5 Plus, and probalbly others.

I like to know if is possible to get a blower 4020 version. (never used onshapes, currently learning FreeCad)

Or if it is compatible to use the coreXY version.

Thx in advance ! Great work, soon I will post my pictures.

Hi :) You've got problem with back plate fan, correct? On repository is slim version for 5015 fan, but event with that You need to move endstop. I've got this in Ender 5 Pro, I just move endstop a little and now everything is fine. I can provide You some photos if You want.

themacboy commented 3 years ago

Yes, sure. And a lot of Thx

El lun., 26 abr. 2021 12:40, Igor Chudy @.***> escribió:

First of all, I'm sorry to post it here, but the Cartesian repository looks close to post issues.

I noticed than cartesian and idex design use the 5015 blower, and it is too large to fit in my Ender 5 Plus, and probalbly others.

I like to know if is possible to get a blower 4020 version. (never used onshapes, currently learning FreeCad)

Or if it is compatible to use the coreXY version.

Thx in advance ! Great work, soon I will post my pictures.

Hi :) You've got problem with back plate fan, correct? On repository is slim version for 5015 fan, but event with that You need to move endstop. I've got this in Ender 5 Pro, I just move endstop a little and now everything is fine. I can provide You some photos if You want.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/EVA-3D/eva-main/issues/43#issuecomment-826725976, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB5QVX6FHSINBNZPPWBXDRDTKU7JDANCNFSM43SRRSWQ .

themacboy commented 3 years ago

Where is the slim version?

El lun., 26 abr. 2021 12:55, themacboy @.***> escribió:

Yes, sure. And a lot of Thx

El lun., 26 abr. 2021 12:40, Igor Chudy @.***> escribió:

First of all, I'm sorry to post it here, but the Cartesian repository looks close to post issues.

I noticed than cartesian and idex design use the 5015 blower, and it is too large to fit in my Ender 5 Plus, and probalbly others.

I like to know if is possible to get a blower 4020 version. (never used onshapes, currently learning FreeCad)

Or if it is compatible to use the coreXY version.

Thx in advance ! Great work, soon I will post my pictures.

Hi :) You've got problem with back plate fan, correct? On repository is slim version for 5015 fan, but event with that You need to move endstop. I've got this in Ender 5 Pro, I just move endstop a little and now everything is fine. I can provide You some photos if You want.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/EVA-3D/eva-main/issues/43#issuecomment-826725976, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB5QVX6FHSINBNZPPWBXDRDTKU7JDANCNFSM43SRRSWQ .

vellkan commented 3 years ago

As I understand You've got this problem, yes? This is version with slim back plate, but still can hit to this metal parts. I just moved Y endstop to the front. Yes, I lost about 2cmm of bed in Y axis, but can live with that :)

IMG_20210426_144800 IMG_20210426_144748 IMG_20210426_144653

themacboy commented 3 years ago

+1

I can't find this slim version, where I must search?

vellkan commented 3 years ago

I found it on Discord channel, but I will upload it on OneDrive: https://1drv.ms/u/s!AglN16Zy9Yb1pmkzyMej11izTrnm?e=GsXgku

themacboy commented 3 years ago

Lot of Thx

El lun., 26 abr. 2021 20:37, Igor Chudy @.***> escribió:

I found it on Discord channel, but I will upload it on OneDrive: https://1drv.ms/u/s!AglN16Zy9Yb1pmkzyMej11izTrnm?e=GsXgku

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/EVA-3D/eva-main/issues/43#issuecomment-827059700, or unsubscribe https://github.com/notifications/unsubscribe-auth/AB5QVX2KB2GFTGXQPZYFLELTKWXG5ANCNFSM43SRRSWQ .

pkucmus commented 3 years ago

I'll assume this one is closed