search

FYSETC / FYSETC-Mini-12864-Panel

This is a opensouce, cheap, with RGB indicator, common to Marlin's display, supports offline printing, resolution is 12864, display area is 2.4'', SD card holder can be side or vertical, convenient for different installation occasions Ideal for small 3D printers.
https://www.aliexpress.com/item/32970936729.html
63 stars 25 forks source link

Display does not work #1

Open Brainc0re opened 5 years ago

Brainc0re commented 5 years ago

I have a CR10S-Pro which normally use a touchscreen. But i didn't like and replaced it with a 12864 reprap full graphic controller. That controller/display works since weeks. So i thought, that this mini12864 will work too. But im not able to run it :/ Not even the backlight works (Pin1 and Pin2 are correct - i can meassure 5V - Pin1 (+) // Pin2 (-) and J2 has 3.3V) I made the changes in Marlin which are provided by fysetc on their website.

Is it possible, that this display wont work on the creality mainboard?

Current Firmware (reprap 12864): https://drive.google.com/open?id=1HoQVlum-DM5lGhCuu1yqCfW6UupuqbK6 FW for mini12864: https://drive.google.com/open?id=11KdF0nT0fa-EBrvGuiYhUTILRo4qJgjR Mainboard layout: https://drive.google.com/open?id=1Ya5zHF_WQpw7XY_BoL0zs20UwexBvtwI

Attention: Both FWs has the same *.ino name but different folder names.

Yurumakum48 commented 2 years ago

Hello how are you? I'm having a problem with the MINI FYSETC 12864 RGB LCD board, I'm not able to configure it in Marlim at all! I've tried it in several versions of Marlim since 1.1.9 / 1.1.x / 2.9.1 / 2.9.2 / 2.0.x but in none of them I can get it right! The motherboard is from Creality ATMEGA 2560 V2.2. The most I could do was make the LCD turn on all the lights, but it doesn't turn on the screen, I tried everything but nothing solved, it was a long 5 days trying, could anyone out there help me with this problem? Attached images for further clarification. Arduino used and the 1.8.16 Thank you all. Placa Creality v2 2 FYSETC LCD MINI 12864

ejhoness commented 2 years ago

180º EXP1 and EXP2 in lcd,

Eugeniusz-Gienek commented 4 months ago

180º EXP1 and EXP2 in lcd,

OMG that worked! Thanks man!