search

FreeYourStream / freedeck-hardware

all the stuff you need to build your own FreeDeck
Other
747 stars 51 forks source link

Nothing displayed on screen #23

Closed HarsiFPV closed 3 years ago

HarsiFPV commented 3 years ago

Using all the components listed, I finished building it and when I plug it in after puting in the SD card containing the config file, the screens light up bright but do not display any image contained in the SD card. Using the serial function in the configurator doesn't help. If you have any idea of what could be causing the issue feel free to tell me. Thanks :)

Gregor-Davies commented 3 years ago

Hey! It would be helpful if you provided a picture of your wiring to make sure everything is connected properly.

HarsiFPV commented 3 years ago

Hey ! My bad for not saying this but I am using the pcb that Adam Welch provides in his video. [ IMG_20210323_205329 IMG_20210323_205324

](url)

Gregor-Davies commented 3 years ago

Did/does the Arduino work when not attached to the pcb? The pins on the Arduino might need a bit more solder.

HarsiFPV commented 3 years ago

Yes I flashed the arduino with the sketch before soldering it. I will try to add a little bit more solder. I'll keep you in touch thanks :)

HarsiFPV commented 3 years ago

So I wen't ahead and reflowed solder on every pin of the board, and I am still facing the same issue :(

Gregor-Davies commented 3 years ago

In that case there's something wrong in the pcb try going around on the pcb with a multimeter.

legomannetje commented 3 years ago

Hey HarsiFPV,

If you still have this issue, please visit our discord! Click here to join

koriwi commented 3 years ago

Feel free to reopen or comment your solution. will close this ticket now :)