An ESP32-based trip meter primarily made for measuring fuel efficiency.
I started this project in search of a solution for measuring the fuel efficiency on my '97 Volvo 940. The only real solution I found prior was the MPGuino, but I quickly realised it wasn't for my needs. What I wanted was to have a solution that was as clean as possible, so having a separate display that I had to mount somewhere was out of the question.
Instead, I built it around a standard Bluetooth OBD-II interface, which would allow any device to get information and display it in any way they want. This was perfect for my use case, as I wanted to display all the information on my phone or Android stereo via the Torque app.
The ground reference and power is currently given by the USB port on the ESP32. This may change later due to being a limiting factor.
This project is mainly made to support saturation-type injectors. If your engine uses other types of injectors, such as peak-and-hold injectors, this project will not work.
The easiest way to check this is to measure the resistance of an injector; If it has a resistance of around 12Ω, it is a saturation-type injector. If it has a resistance of around 2-3Ω, it is likely a peak-and-hold injector.
Also note that injectors that are connected for batch injection may be connected in parallel, and may in some cases display a resistance that is lower than normal.
The reason why peak-and-hold injectors will not work, is that they work differently from saturation injectors. While saturation injectors simply open while the signal is active, a peak-and-hold injector, like its name suggests, sends a high voltage signal which forces the injector open (peak). After that, a lower-voltage signal (normally around 12 volts) is pulsed through the remainder of the opening time (hold).
Since the project currently uses ESP32-specific platform code a lot, it would be difficult to port to using normal Arduino implementations. It may be possible to port it to ESP8266 devices, but they would need a discrete Bluetooth module.