search

GNS3 / dynamips

Dynamips development
GNU General Public License v2.0
349 stars 94 forks source link

clock is lost when router is reloaded despite saving config #80

Open julien-duponchelle opened 7 years ago

julien-duponchelle commented 7 years ago

From @swils024 on May 21, 2017 20:29

While doing the Cisco CCNA (200-125) - Pass with GNS3 course on GNS3 Academy, I noticed that a user had commented on one of the NTP videos saying that the clock setting is lost when a router is reloaded. I have replicated the issue and despite saving the config before the reload, the config was lost. All comments welcome.

Copied from original issue: GNS3/gns3-gui#2075

julien-duponchelle commented 7 years ago

When using dynamips?

julien-duponchelle commented 7 years ago

From @swils024 on May 22, 2017 7:3

Yes using dynamips I was using one of the recommended IOS images.

Regards, Stephen

On 22 May 2017 7:58 a.m., "Julien Duponchelle" notifications@github.com wrote:

When using dynamips?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/GNS3/gns3-gui/issues/2075#issuecomment-303015172, or mute the thread https://github.com/notifications/unsubscribe-auth/AVP7vZBPVkhJfSn0zNC0Lsx4wwSehXMkks5r8TIugaJpZM4Nhtur .

vnjvijay commented 5 years ago

Did You saved your configuration after setting