Open ruiming46zrm opened 8 months ago
Hey, I have the same issue. How can I solve it ? Thanks
Can you enable the uart driver in menuconfig and retry?
[image: https://greenwaves-technologies.com/] https://greenwaves-technologies.com/
HeleMartin @.***>于2024年7月22日 周一16:43写道:
Hey, I have the same issue. How can I solve it ? Thanks
— Reply to this email directly, view it on GitHub https://github.com/GreenWaves-Technologies/yolox_people_detection/issues/2#issuecomment-2243137993, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABD6RW3HP63VEFIGFX5T353ZNULCJAVCNFSM6AAAAABCBLZO6GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDENBTGEZTOOJZGM . You are receiving this because you are subscribed to this thread.Message ID: <GreenWaves-Technologies/yolox_people_detection/issues/2/2243137993@ github.com>
it works thanks
@Yaooooo when i am running the code generator i am getting the following undefined error. could you please help? CNN_BasicKernels_NE16.c:925: undefined reference to `hal_cl_eu_event_mask_wait_and_clear'
Best Rgds, Uda
Could you please specify:
Yao
On Sat, Sep 14, 2024 at 12:17 PM gwgknudayanga @.***> wrote:
@Yaooooo https://github.com/Yaooooo when i am running the code generator i am getting the following undefined error. could you please help? CNN_BasicKernels_NE16.c:925: undefined reference to `hal_cl_eu_event_mask_wait_and_clear'
Best Rgds, Uda
— Reply to this email directly, view it on GitHub https://github.com/GreenWaves-Technologies/yolox_people_detection/issues/2#issuecomment-2350941756, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABD6RW24EVFTN53T2ZZHBZDZWQEKXAVCNFSM6AAAAABCBLZO6GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJQHE2DCNZVGY . You are receiving this because you were mentioned.Message ID: @.*** .com>
--
[image: https://greenwaves-technologies.com/] https://greenwaves-technologies.com/
Hi Yao,
Currently we are using GAP8 board. So i had to remove ne16 stuff which only supported on GAP9. We expect your support in GAP8 evaluation which are ongoing. Thanks for replying.
Thanks and Rgds, Udayanga
On Mon, Sep 16, 2024 at 9:53 AM Yao ZHANG @.***> wrote:
Could you please specify:
- Which SDK you are using?
- Which version?
- Any modifications on the code?
Yao
On Sat, Sep 14, 2024 at 12:17 PM gwgknudayanga @.***> wrote:
@Yaooooo https://github.com/Yaooooo when i am running the code generator i am getting the following undefined error. could you please help? CNN_BasicKernels_NE16.c:925: undefined reference to `hal_cl_eu_event_mask_wait_and_clear'
Best Rgds, Uda
— Reply to this email directly, view it on GitHub < https://github.com/GreenWaves-Technologies/yolox_people_detection/issues/2#issuecomment-2350941756>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABD6RW24EVFTN53T2ZZHBZDZWQEKXAVCNFSM6AAAAABCBLZO6GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJQHE2DCNZVGY>
. You are receiving this because you were mentioned.Message ID: @.*** .com>
--
Yao ZHANGGlobal Customer Success Director APAC Business Development Director Tel: 06.82.78.41.71 Mail: @.*** Wechat: 453115693
[image: https://greenwaves-technologies.com/] https://greenwaves-technologies.com/
— Reply to this email directly, view it on GitHub https://github.com/GreenWaves-Technologies/yolox_people_detection/issues/2#issuecomment-2352234037, or unsubscribe https://github.com/notifications/unsubscribe-auth/AW3LTWD246GPAUNOO4QIWO3ZW2FBHAVCNFSM6AAAAABCBLZO6GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJSGIZTIMBTG4 . You are receiving this because you commented.Message ID: @.*** .com>
-- G.W.G.K.N.Udayanga Dept of Computer Science & Engineering University of Moratuwa Sri Lanka
Hi,
Will we able to use gap9 sdk? Current we don't have the gap9 chip. we only have gap8. But gap8 seems to be insufficient for the detection algorithms. So we would like if we can use gap9 sdk and check how the accuracies and latencies are going to be. Is it possible?
Thanks and Rgds, Udayanga
On Mon, Sep 16, 2024 at 5:27 PM kashita NIranjan Udayanga G.W.G. < @.***> wrote:
Hi Yao,
Currently we are using GAP8 board. So i had to remove ne16 stuff which only supported on GAP9. We expect your support in GAP8 evaluation which are ongoing. Thanks for replying.
Thanks and Rgds, Udayanga
On Mon, Sep 16, 2024 at 9:53 AM Yao ZHANG @.***> wrote:
Could you please specify:
- Which SDK you are using?
- Which version?
- Any modifications on the code?
Yao
On Sat, Sep 14, 2024 at 12:17 PM gwgknudayanga @.***> wrote:
@Yaooooo https://github.com/Yaooooo when i am running the code generator i am getting the following undefined error. could you please help? CNN_BasicKernels_NE16.c:925: undefined reference to `hal_cl_eu_event_mask_wait_and_clear'
Best Rgds, Uda
— Reply to this email directly, view it on GitHub < https://github.com/GreenWaves-Technologies/yolox_people_detection/issues/2#issuecomment-2350941756>,
or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABD6RW24EVFTN53T2ZZHBZDZWQEKXAVCNFSM6AAAAABCBLZO6GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJQHE2DCNZVGY>
. You are receiving this because you were mentioned.Message ID: @.*** .com>
--
Yao ZHANGGlobal Customer Success Director APAC Business Development Director Tel: 06.82.78.41.71 Mail: @.*** Wechat: 453115693
[image: https://greenwaves-technologies.com/] https://greenwaves-technologies.com/
— Reply to this email directly, view it on GitHub https://github.com/GreenWaves-Technologies/yolox_people_detection/issues/2#issuecomment-2352234037, or unsubscribe https://github.com/notifications/unsubscribe-auth/AW3LTWD246GPAUNOO4QIWO3ZW2FBHAVCNFSM6AAAAABCBLZO6GVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJSGIZTIMBTG4 . You are receiving this because you commented.Message ID: <GreenWaves-Technologies/yolox_people_detection/issues/2/2352234037@ github.com>
-- G.W.G.K.N.Udayanga Dept of Computer Science & Engineering University of Moratuwa Sri Lanka
-- G.W.G.K.N.Udayanga Dept of Computer Science & Engineering University of Moratuwa Sri Lanka
[ 95%] Building C object CMakeFiles/main.dir/custom_layers/slicing.c.obj [ 95%] Building C object CMakeFiles/main.dir/custom_layers/decoding.c.obj [ 96%] Building C object CMakeFiles/main.dir/custom_layers/postprocessing.c.obj [ 96%] Building C object CMakeFiles/main.dir/custom_layers/draw.c.obj [ 97%] Building C object CMakeFiles/main.dir/custom_layers/jpeg_compress.c.obj [ 98%] Building C object CMakeFiles/main.dir/custom_layers/img_flush.c.obj [ 98%] Building C object CMakeFiles/main.dir/custom_layers/camera.c.obj [100%] Building C object CMakeFiles/main.dir/spi_comm.c.obj [100%] Linking C executable main CMakeFiles/main.dir/main_demo.c.obj: In function
test_main': main_demo.c:(.text.test_main+0x106): undefined reference to
pi_uart_conf_init' main_demo.c:(.text.test_main+0x134): undefined reference topi_uart_open' main_demo.c:(.text.test_main+0x498): undefined reference to
pi_uart_write' main_demo.c:(.text.test_main+0x4a6): undefined reference topi_uart_write' main_demo.c:(.text.test_main+0x4b8): undefined reference to
pi_uart_write' main_demo.c:(.text.test_main+0x4e0): undefined reference topi_uart_write' main_demo.c:(.text.test_main+0x5a6): undefined reference to
pi_uart_write' CMakeFiles/main.dir/main_demo.c.obj:main_demo.c:(.text.test_main+0x5b4): more undefined references to `pi_uart_write' follow collect2: error: ld returned 1 exit status make[2]: [CMakeFiles/main.dir/build.make:943: main] Error 1 make[1]: [CMakeFiles/Makefile2:732: CMakeFiles/main.dir/all] Error 2 make: *** [Makefile:91: all] Error 2我试过: rm -rf build cmake -B build -DMODE=INFERENCE cd build make clean all run platform=gvsoc 也试过: cmake -B build -DMODE=INFERENCE cmake --build build -t run 都会有上述问题? 请问怎么解决? mnist的example可以运行。