- ๐ Hi, Iโm @HEN3DRIK
- ๐ Iโm interested in 3DPrinting and Electroforming/Electroplating
- ๐ซ How to reach me
BeadSorter
Nice to have you here. In this repository I keep the files that are necessary for the BeadSorter. Also there will be documentation about the needed electronics and software. I will update this repo continuously.
Video
![perlerbead sorting machine](https://img.youtube.com/vi/CX-w85ZC5AQ/0.jpg)
References
These are Projects necessary for this beadsorter to work.
Original Project by Linus Barth:
BeadSort: Machine for sorting perler beads by LinusB - Thingiverse
Modified to skip aligner phase by RichA777
Bead Sorter modified to skip aligner phase by RichA777 - Thingiverse
Parts List
You'll need electronic parts for this bead sorter. This is alist of what i used in this project. I belive some components can be substituted.
Electronics Schema
I know, this isn't nice looking.
This whole thing is powered by a 12V power supply. I used a 9VA; That thing doesnt requiere a lot of current.
![alt text](https://github.com/HEN3DRIK/BeadSorter/blob/main/beadsorter_schema.png?raw=true)
Printing Guide
Printing Linus Barth Parts
Print everything but the following Parts:
- 0-hopper-seq-plate.stl
- 0-hopper.stl
- 1-sequentializer-base.stl
- 1-sequentializer-ilc-corner.stl
- 1-sequentializer-tube-inset.stl
- 2-*.stl
- 3-analyzer-entry-tube.stl
- 4-dispatcher-tube-holder.stl
- 4-dispatcher-servo-holder.stl
- 4-dispatcher-base.stl
- 5-outputs-base.stl
- 5-outputs-slide-1.stl
- 5-outputs-slide-2.stl
- 5-outputs-slide-3.stl
- rpi-holder.stl
Printing RichA777 parts
Print the following parts
- 0-hopper-seq-plate-4_holes_modified
- Sequencer_base_modified
- 0_Hopper_Modified_Cleaned_up
Printing my parts
Print:
- 4x 1-sequentializer-ilc-corner_for_higher_motor.stl
- ring_container.stl
- 4_Stepper_shaft.stl
- Stepper_shaft_ring.stl
- Servo_base2.stl
- Stepper_shaft_ring.stl
- 3-analyzer-entry-tube_modified.stl
- UM2-Sequencer_tube_modified_tighter_Higher_Motor.stl
- 5-outputs-slide-1.stl
- 5-outputs-slide-2.stl
- 5-outputs-slide-3.stl
- holder_typeA.stl
- holder_typeB.stl
- Plate.stl
- Box_bottom.stl
- Box_lid.stl
- Box_top.stl