[device-port] [axon7] ZTE Axon 7

[TuxThePenguin0]

Tree: halium-7.1

• [x] Create manifest (has been pulled into repo)
• [x] Boot image and system image build successfully
• [x] Device boots into rootfs, usb: Manufacturer: GNU/Linux Device appears in dmesg on host.
• [x] LXC container starts and does not crash (Only in UT rootfs)
• [ ] libhybris tests
  • [x] test_gps (Only in UT rootfs)
  • [ ] test_hwcomposer
  • [ ] test_lights
  • [x] test_vibrator
  • [x] test_wifi (Only in UT rootfs)
  • [ ] test_sensors
  • [ ] test_audio
  • [ ] test_camera
  • [x] test_input (Only in UT rootfs)
  • [ ] test_nfc
  • [ ] test_recorder

Information: Due to being based on LOS 14 flashing the phone back to the LOS 14 modem, bootloader and partition layout is required.

I have removed the NFC sources from the manifest as (at least without modification) they do not compile. Due to this it is unlikely that this device will ever have NFC working in any Halium based distributions although to my knowledge this is not an issue as no distributions either support or make use of NFC anyway.

First boot!

Whats working on UBports Xenial armhf (Halium boot):

• [x] USB
• [x] Display
• [x] Touch
• [x] Hardware keys
• [x] SD card slot
• [ ] Sound
• [x] WiFi (partial, requires terminal command echo sta > /sys/module/wlan/parameters/fwpath to enable)
• [ ] Bluetooth
• [ ] Modem
• [x] Sensors
• [ ] Camera
• [x] Flashlight
• [ ] Fingerprint sensor
• [ ] NFC (likely never)

[joelkahan]

Any updates?

[TuxThePenguin0]

Yeah sorry I haven't been working on this port lately since I have had other work and my other phone (Nexus 5X) gave up the ghost a second time, not to mention that I was having some trouble getting things like the sensors to work.

I have since bought another phone which I have spent some time getting UT working on and I will get back to the Axon 7 port eventually, it will just take me some time.

In the mean time any help is greatly appreciated :)

[niansa]

@TuxThePenguin0 hi, any progress? Would be very nice to share source code and some build in case you've given this up. :-) I might continue this

[TuxThePenguin0]

If anyone wants to take over this they can, I have little motivation to work on UT ports at the moment and my Axon 7 bricked itself so there's no reason for me to continue working on the port

[GeoEduca]

Greetings, I am trying to start a job based on this model: zte nubia z5s mini nx406e I just hope to find information to start. I will try to be active on these 2 sites. For their develpment. https://www.reddit.com/r/LineageOS/comments/r48d61/contribute_with_a_new_model_zte_nubia_z5s_mini/ https://forums.ubports.com/topic/7057/a-query-about-the-device-zte-nubia-z5s-mini-nx406e any help is appreciated