search

Heeks / heekscad

Computer-Aided Design application based on OCE
https://sites.google.com/site/heekscad/
Other
198 stars 48 forks source link

Pocket gcode path overflow #420

Open woodm528 opened 6 years ago

woodm528 commented 6 years ago

Hi; I am seeing a pocket gcode generation issue with a simple 2d plate. I have attached a couple screen shots and can provide the heeks file. I see this on heekscad version 1.3.0 (runing on ubuntu 18.04) as well as heekscad 1.1.0 (ubuntu 16.04). Not seeing any recent activity on here, but I figure id post any way. Also I was trying to pull the source but having trouble setting up dependencies referenced in README.md openscade etc, Not sure where to get additional build detail. Any help would be greatly appreciated

Thanks Mike

heekscad_pocket_issue

screenshot from 2018-10-13 23-33-38

woodm528 commented 6 years ago

Oh okay - so needed to zip the heeks file to get it to attach, it is attached here Thanks Mike

z_ball_screw_mount_plate.heeks.zip

philtipping commented 5 years ago

Mike, just tried your zip file with v1.4.0 on lubuntu 18.04. Clicked G0 and code generated with no errors. Phil.

woodm528 commented 5 years ago

Hi Phil; Thanks for taking a look at this. So yours works and mine doesn't. Is there something I can do to check my install. Maybe make sure I have all the right versions of heeks and dependent libraries, etc.

Thanks Mike

philtipping commented 5 years ago

Not sure how to check apart from the Help,About display - mine shows 1.4.0. Can't remember exactly how I installed it on lubuntu but think it was a combination of Synaptic Package Manager and/or the add-apt-repository... and apt-get... commands as shown here https://launchpad.net/~neomilium/+archive/ubuntu/cam

woodm528 commented 5 years ago

Looks like your a version ahead of mine. Not seen this sight either. Looks like i'm gonna be updating my app when I get the time. I'll post the result after.

Fyi; My notes indicate I had installed via apt-get following this sight https://github.com/Heeks/heekscnc/wiki/Getting-HeeksCNC-for-Linux sudo add-apt-repository ppa:neomilium/heekscnc-devel sudo apt-get update sudo apt-get install heekscnc

Thanks Mike

philtipping commented 5 years ago

Ok Mike - sounds like you're better organised than me! I've got references to 'ppa.launchpad.net/neomilium/heekscnc-devel/ubuntu bionic InRelease' when I do a sudo apt-get update, so this suggests I must have followed the ubuntu 18.04 instructions. I mainly use the Windows 1.4 version as my target Mach3 runs on an old Windows XP computer, but I have the lubuntu version on a laptop for armchair 'learning' - only made my first 'cut' this week :) Let me know how you get on.