UnCoVar

Workflow for Transparent and Robust Virus Variant Calling, Genome Reconstruction and Lineage Assignment

Usage

The usage is described in detail in UnCoVar's GitHub pages

Step 1: Install Snakemake and Snakedeploy

Snakemake and Snakedeploy are best installed via the Mamba package manager (a drop-in replacement for conda). If you have neither Conda nor Mamba, it can be installed via Mambaforge. For other options see here.

Given that Mamba is installed, run

    mamba create -c conda-forge -c bioconda --name snakemake snakemake snakedeploy

to install both Snakemake and Snakedeploy in an isolated environment. For all following commands ensure that this environment is activated via

    conda activate snakemake

Step 2: Clone or Deploy workflow

First, create an appropriate project working directory on your system and enter it:

    WORKDIR=path/to/project-workdir
    mkdir -p ${WORKDIR}
    cd ${WORKDIR}

In all following steps, we will assume that you are inside of that directory. Second, run

Given that Snakemake is installed and you want to clone the full workflow you can do it as follows:

    git clone https://github.com/IKIM-Essen/uncovar

Given that Snakemake and Snakedeploy are installed and available (see Step 1), the workflow can be deployed as follows:

    snakedeploy deploy-workflow https://github.com/IKIM-Essen/uncovar . --tag v0.16.0

Snakedeploy will create two folders workflow and config. The former contains the deployment of the UnCoVar workflow as a Snakemake module, the latter contains configuration files which will be modified in the next step in order to configure the workflow to your needs. Later, when executing the workflow, Snakemake will automatically find the main Snakefile in the workflow subfolder.

Step 3: Configure workflow

General settings

Config file

To configure this workflow, modify config/config.yaml according to your needs, following the explanations provided in the file. It is especially recommended to provide a BED file with primer coordinates, when the analyzed reads derive from amplicon-tiled sequencing, so the primers are trimmed appropriately.

Sample sheet

The sample sheet contains all samples to be analyzed by UnCoVar.

Auto filling

UnCoVar offers the possibility to automatically append paired-end sequenced samples to the sample sheet. To load your data into the workflow execute

    snakemake --cores all --use-conda update_sample

with the root of the UnCoVar as working directory. It is recommended to use the following structure to when adding data automatically:

    ├── archive
    ├── incoming
    └── snakemake-workflow-sars-cov2
        ├── data
            └── 2023-12-24

However, this structure is not set in stone and can be adjusted via the config/config.yaml file under data-handling. Only the following path to the corresponding folders, relative to the directory of UnCoVar are needed:

incoming: path of incoming data, which is moved to the data directory by the preprocessing script. Defaults to ../incoming/.
data: path to store data within the workflow. defaults to data/. It is recommend using subfolders named properly (e.g. with date)
archive: path to archive data from the results from the analysis to. Defaults to ../archive/.

The incoming directory should contain paired end reads in (compressed) FASTQ format. UnCoVar automatically copies your data into the data directory and moves all files from incoming directory to the archive. After the analysis, all results are compressed and saved alongside the reads.

Moreover, the sample sheet is automatically updated with the new files. Please note, that only the part of the filename before the first '_' character is used as the sample name within the workflow. Technology and amplicon flag (is_amplicon_data) have to be revisited manually

Manual filling

Of course, samples to be analyzed can also be added manually to the sample sheet. For each sample, the a new line in config/pep/samples.csv with the following content has to be defined:

sample_name: name or identifier of sample
fq1: path to read 1 in FASTQ format
fq2: path to read 2 in FASTQ format (if paired end sequencing)
date: sampling date of the sample
is_amplicon_data: indicates whether the data was generated with a shotgun (0) or amplicon (1) sequencing
technology: indicates the sequencing technology used to generate the samples (illumina, ont, ion)
include_in_high_genome_summary: indicates if sample should be included in the submission files (1) or not (0)

Step 4: Run workflow

Given that the workflow has been properly deployed and configured, it can be executed as follows.

Fow running the workflow while deploying any necessary software via conda (using the Mamba package manager by default), run Snakemake with

    snakemake --cores all --use-conda

Snakemake will automatically detect the main Snakefile in the workflow subfolder and execute the workflow module that has been defined by the deployment in step 2.

For further options, e.g. for cluster and cloud execution, see the docs.

This workflow is written with Snakemake and details and tools are described in the Snakemake Workflow Catalog.

If you use this workflow in a paper, don't forget to give credits to the authors by citing the URL of this repository and its DOI (see above).

IKIM-Essen / uncovar

readme