Open akhalfan opened 12 years ago
xieanxiean
commented
11 years ago hi ,i have encounted some problems while installing the flowscale.i cant download some packages from:http://of-lab2.grnoc.iu.edu/flowscaleupdate.so could you please send me some necessary packages through e-mail?such as:grnoc.util.net.ipaddress and so on .my e-mail addr is:xiean_hi@126.com.thanks a lot.
bm4acd
commented
11 years ago Yes, I have the same problem as xieanxiean. In the Quick Start(http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site.
Is there any alternatives to solve this problem?
xieanxiean
commented
11 years ago In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start(http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
bm4acd
commented
11 years ago Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526.
Best Regards, Yoyo Chen
xieanxiean
commented
11 years ago probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
akhalfan
commented
11 years ago Do you see any ports on your machine open بتاريخ 2012 10 16 12:00، كتبها "bm4acd" notifications@github.com:
Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9476018.
bm4acd
commented
11 years ago Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported
into eclipse too.
The Quick Start said that click "debug" button ("Click on the "debug"
button") in the flowscale-ids.product. I did it. No any message shown but
"
I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589.
Best Regards, Yoyo Chen
bm4acd
commented
11 years ago correction: When I launch this product, eclipse popup a dialog "operation in progress" and the disappear (less then 0.5 second).
2012/10/17 Yoyo Chen bm4acd@gmail.com
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589.
Best Regards, Yoyo Chen
Best Regards, Yoyo Chen
bm4acd
commented
11 years ago Dear Ali,
I don't think so. It shows "terminated" in eclipse's console when launched. I use netstat to check and there seems no any port about FlowScale (6633, 8080, or else). (My environment is WinXP + JDK 1.6 + Eclipse Juno)
2012/10/16 Ali Khalfan notifications@github.com
Do you see any ports on your machine open بتاريخ 2012 10 16 12:00، كتبها "bm4acd" notifications@github.com:
Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9476018>.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9481319.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450.
bm4acd
commented
11 years ago No, there is no new log files created in
2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340.
bm4acd
commented
11 years ago just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" notifications@github.com:
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
bm4acd
commented
11 years ago About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" <notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450 .
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" notifications@github.com:
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start), got error when add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450 .
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199.
bm4acd
commented
11 years ago No, not yet.
I retry to build a new environment. I use following commands to get openflowj & beacon git clone -b dev/1.0.2 git://gitosis.stanford.edu/openflowj.git git clone -b dev/1.0.1 git://gitosis.stanford.edu/beacon.git
And then import all projects of Flowscale. After open the main.target of "Flowscale Target Platform", wait for "Resolving Target Definition" and click "Set as target platform", there is no more error.
I can launch beacon in debug mode in this workspace. But I still can't launch flowscale yet. When I open flowscale-id.product of project "edu.iu.incntre.flowscaleproduct" and click "Launch an Eclipse application in debug mode", it give me error message "Cannot connect to VM".
Still trying to figure out what's going wrong.
Thanks.
yoyo
2012/10/18 Ali Khalfan notifications@github.com
Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" notifications@github.com:
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start( http://www.openflowhub.org/display/FlowScale/Quick+Start),
got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450 .
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199>.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9553350.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago It looks like either an eclipse or a jvm issue, you might need to restart eclipse to get it to work (or reboot the machine).
Also, you might consider running it without debug mode.
Let me know if any of those help, also, please let me know your config details.
yoyochen wrote:
No, not yet.
I retry to build a new environment. I use following commands to get openflowj & beacon git clone -b dev/1.0.2 git://gitosis.stanford.edu/openflowj.git git clone -b dev/1.0.1 git://gitosis.stanford.edu/beacon.git
And then import all projects of Flowscale. After open the main.target of "Flowscale Target Platform", wait for "Resolving Target Definition" and click "Set as target platform", there is no more error.
I can launch beacon in debug mode in this workspace. But I still can't launch flowscale yet. When I open flowscale-id.product of project "edu.iu.incntre.flowscaleproduct" and click "Launch an Eclipse application in debug mode", it give me error message "Cannot connect to VM".
Still trying to figure out what's going wrong.
Thanks.
yoyo
2012/10/18 Ali Khalfan notifications@github.com
Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" notifications@github.com:
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start(
got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450 .
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199>.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9553350.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9559319.
bm4acd
commented
11 years ago Thanks for you and xiean_hi's help. I can launch flowscale at last. In Window | Preference | Java | Installed JRE, I add a JDK and set as default. And flowscale can launch now. I am working to deploy webui now.
There is still a problem to me. I use mininet to simulate the network. When launch beacon, the pingall in mininet can works fine. When launch flowscale, the pingall fail. Still have no idea on this part.
yoyo
2012/10/19 Ali Khalfan notifications@github.com
It looks like either an eclipse or a jvm issue, you might need to restart eclipse to get it to work (or reboot the machine).
Also, you might consider running it without debug mode.
Let me know if any of those help, also, please let me know your config details.
yoyochen wrote:
No, not yet.
I retry to build a new environment. I use following commands to get openflowj & beacon git clone -b dev/1.0.2 git://gitosis.stanford.edu/openflowj.git git clone -b dev/1.0.1 git://gitosis.stanford.edu/beacon.git
And then import all projects of Flowscale. After open the main.target of "Flowscale Target Platform", wait for "Resolving Target Definition" and click "Set as target platform", there is no more error.
I can launch beacon in debug mode in this workspace. But I still can't launch flowscale yet. When I open flowscale-id.product of project "edu.iu.incntre.flowscaleproduct" and click "Launch an Eclipse application in debug mode", it give me error message "Cannot connect to VM".
Still trying to figure out what's going wrong.
Thanks.
yoyo
2012/10/18 Ali Khalfan notifications@github.com
Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" notifications@github.com:
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start(
got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450 .
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975 .
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9553350>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9559319.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9577943.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago yoyochen,
Thanks for the JDK info.
FlowScale uses Beacon as its controller and all OpenFlow messages directed to Beacon are in turn forwarded to FlowScale. All switch, router or any other functionalities available in the Beacon deployment are not included with FlowScale.
I hope that clarifies things. Let me know if you need help in deploying the webui.
--Ali
yoyochen wrote:
Thanks for you and xiean_hi's help. I can launch flowscale at last. In Window | Preference | Java | Installed JRE, I add a JDK and set as default. And flowscale can launch now. I am working to deploy webui now.
There is still a problem to me. I use mininet to simulate the network. When launch beacon, the pingall in mininet can works fine. When launch flowscale, the pingall fail. Still have no idea on this part.
yoyo
2012/10/19 Ali Khalfan notifications@github.com
It looks like either an eclipse or a jvm issue, you might need to restart eclipse to get it to work (or reboot the machine).
Also, you might consider running it without debug mode.
Let me know if any of those help, also, please let me know your config details.
yoyochen wrote:
No, not yet.
I retry to build a new environment. I use following commands to get openflowj & beacon git clone -b dev/1.0.2 git://gitosis.stanford.edu/openflowj.git git clone -b dev/1.0.1 git://gitosis.stanford.edu/beacon.git
And then import all projects of Flowscale. After open the main.target of "Flowscale Target Platform", wait for "Resolving Target Definition" and click "Set as target platform", there is no more error.
I can launch beacon in debug mode in this workspace. But I still can't launch flowscale yet. When I open flowscale-id.product of project "edu.iu.incntre.flowscaleproduct" and click "Launch an Eclipse application in debug mode", it give me error message "Cannot connect to VM".
Still trying to figure out what's going wrong.
Thanks.
yoyo
2012/10/18 Ali Khalfan notifications@github.com
Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" notifications@github.com:
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start(
got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450 .
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975 .
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199>.
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9553350>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9559319.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9577943.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9587499.
bm4acd
commented
11 years ago I use Mininet to simulate the network. When I launch the "Beacon Main Target" and run "pingall' in Mininet. It works fine. When I launch FlowScale and run "pingall", the pings are all fail. That sounds like the beacon not functioning at this scenario. I still can't figure out what's wrong yet.
About webui. I still have trouble. I think it is in Perl. I can link to index2.cgi and see the "test" on the browser. When link to index.cgi, I got can't locate to some files problem. I have error on use Template and Switch so far. Where can I got those packages?
yoyochen
2012/10/19 Ali Khalfan notifications@github.com
yoyochen,
Thanks for the JDK info.
FlowScale uses Beacon as its controller and all OpenFlow messages directed to Beacon are in turn forwarded to FlowScale. All switch, router or any other functionalities available in the Beacon deployment are not included with FlowScale.
I hope that clarifies things. Let me know if you need help in deploying the webui.
--Ali
yoyochen wrote:
Thanks for you and xiean_hi's help. I can launch flowscale at last. In Window | Preference | Java | Installed JRE, I add a JDK and set as default. And flowscale can launch now. I am working to deploy webui now.
There is still a problem to me. I use mininet to simulate the network. When launch beacon, the pingall in mininet can works fine. When launch flowscale, the pingall fail. Still have no idea on this part.
yoyo
2012/10/19 Ali Khalfan notifications@github.com
It looks like either an eclipse or a jvm issue, you might need to restart eclipse to get it to work (or reboot the machine).
Also, you might consider running it without debug mode.
Let me know if any of those help, also, please let me know your config details.
yoyochen wrote:
No, not yet.
I retry to build a new environment. I use following commands to get openflowj & beacon git clone -b dev/1.0.2 git://gitosis.stanford.edu/openflowj.git git clone -b dev/1.0.1 git://gitosis.stanford.edu/beacon.git
And then import all projects of Flowscale. After open the main.target of "Flowscale Target Platform", wait for "Resolving Target Definition" and click "Set as target platform", there is no more error.
I can launch beacon in debug mode in this workspace. But I still can't launch flowscale yet. When I open flowscale-id.product of project "edu.iu.incntre.flowscaleproduct" and click "Launch an Eclipse application in debug mode", it give me error message "Cannot connect to VM".
Still trying to figure out what's going wrong.
Thanks.
yoyo
2012/10/18 Ali Khalfan notifications@github.com
Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" <notifications@github.com :
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start(
got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450
.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078 .
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975 .
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub
<https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364 .
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199 .
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9553350>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub <https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9559319 .
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9577943>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9587499.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9589815.
Best Regards, Yoyo Chen
akhalfan
commented
11 years ago install cpan on your machine and download all the necessary packages
http://www.cpan.org/modules/INSTALL.html
yoyochen wrote:
I use Mininet to simulate the network. When I launch the "Beacon Main Target" and run "pingall' in Mininet. It works fine. When I launch FlowScale and run "pingall", the pings are all fail. That sounds like the beacon not functioning at this scenario. I still can't figure out what's wrong yet.
About webui. I still have trouble. I think it is in Perl. I can link to index2.cgi and see the "test" on the browser. When link to index.cgi, I got can't locate to some files problem. I have error on use Template and Switch so far. Where can I got those packages?
yoyochen
2012/10/19 Ali Khalfan notifications@github.com
yoyochen,
Thanks for the JDK info.
FlowScale uses Beacon as its controller and all OpenFlow messages directed to Beacon are in turn forwarded to FlowScale. All switch, router or any other functionalities available in the Beacon deployment are not included with FlowScale.
I hope that clarifies things. Let me know if you need help in deploying the webui.
--Ali
yoyochen wrote:
Thanks for you and xiean_hi's help. I can launch flowscale at last. In Window | Preference | Java | Installed JRE, I add a JDK and set as default. And flowscale can launch now. I am working to deploy webui now.
There is still a problem to me. I use mininet to simulate the network. When launch beacon, the pingall in mininet can works fine. When launch flowscale, the pingall fail. Still have no idea on this part.
yoyo
2012/10/19 Ali Khalfan notifications@github.com
It looks like either an eclipse or a jvm issue, you might need to restart eclipse to get it to work (or reboot the machine).
Also, you might consider running it without debug mode.
Let me know if any of those help, also, please let me know your config details.
yoyochen wrote:
No, not yet.
I retry to build a new environment. I use following commands to get openflowj & beacon git clone -b dev/1.0.2 git://gitosis.stanford.edu/openflowj.git git clone -b dev/1.0.1 git://gitosis.stanford.edu/beacon.git
And then import all projects of Flowscale. After open the main.target of "Flowscale Target Platform", wait for "Resolving Target Definition" and click "Set as target platform", there is no more error.
I can launch beacon in debug mode in this workspace. But I still can't launch flowscale yet. When I open flowscale-id.product of project "edu.iu.incntre.flowscaleproduct" and click "Launch an Eclipse application in debug mode", it give me error message "Cannot connect to VM".
Still trying to figure out what's going wrong.
Thanks.
yoyo
2012/10/18 Ali Khalfan notifications@github.com
Great....is it running? بتاريخ 2012 10 18 03:26، كتبها "yoyochen" <notifications@github.com :
About org.eclipse.equinox,console.telnet, that is my mistake. I didn't import that project into workspace. There is no problem now.
2012/10/18 Ali Khalfan notifications@github.com
Yes, the structure is pretty much different, I cleaned up on a lot of the hard coding as well as were the classes go.
one question before I dig deeper, when you say you get an error in org.eclipse.equinox.console.telnet when you hover the mouse over it , does it give you a certain message (like there is a missing package ? )
Let me know
--Ali
yoyochen wrote:
just follow the Quick Start
Setup Beacon and OpenflowJ, and this part ok and works fine. the projects structure of 0.5 is quite different from branch main. I import all of the projects of branch 0.5 into workspace. It is ok to this step. And then fail to launch the Flowscale.
2012/10/17 Ali Khalfan notifications@github.com
Did you modify the config files? بتاريخ 2012 10 17 13:36، كتبها "yoyochen" notifications@github.com:
No, there is no new log files created in
/logs. 2012/10/17 Ali Khalfan notifications@github.com
In your eclipse directory do you see a logs directory? بتاريخ 2012 10 17 09:28، كتبها "yoyochen" < notifications@github.com :
Yes, I have edu.iu.incntre.flowscaleproduct in my workspace, and imported into eclipse too. The Quick Start said that click "debug" button ("Click on the "debug" button") in the flowscale-ids.product. I did it. No any message shown but "
flowscale-ids.product" shown in console view. I found that in the Dependencies tab of flowscale-ids.product, the icon of "org.eclipse.equinox.console.telnet" is with a red cross. I don't know is this prevent me from launch flowscale. Will try to fix this problem.
2012/10/16 xieanxiean notifications@github.com
probably you should download edu.iu.incntre.flowscaleproduct and open the flowscale-ids.product file,down in the testing label,there is a link called"launch as Eclipse application in Debug mode".And it should start running. But I have encounted many errors.And I still can't resolve them.If you have lanuch the app without exceptions,please help me and send the detail steps you have followed.Thanks.
xiean_hi
From: bm4acd Date: 2012-10-16 16:00 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Dear xiean_hi,
Thanks, I have checked out the branch dev/0.5. According to the Quick Start article, if open up the main.target file of "Beacon Main Target" project and then click "Set as target platform.", the projects of FlowScale will get errors. If open the main.target file of "Flowscale Target Platform" and then set as target platform, there is no error in the Eclipse IDE.
Following Running Flowscale part of Quick Start, no matter launch the application in run mode or debug mode, it can't startup.(And there is no error message).
Is there any setting I miss?
Thanks, Yoyo Chen
2012/10/15 xieanxiean notifications@github.com
In github instead of checkIng out the maIn branch checkout the branch dev/0.5
xiean_hi
From: bm4acd Date: 2012-10-15 16:40 To: InCNTRE/FlowScale CC: xieanxiean Subject: Re: [FlowScale] consider merging the functionalities of different classes handling ip adresses (#30) Yes, I have the same problem as xieanxiean. In the Quick Start(
got
error
when
add "http://of-lab2.grnoc.iu.edu/flowscaleupdate" to software site. Is there any alternatives to solve this problem? — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9439526>.
Best Regards, Yoyo Chen — Reply to this email directly or view it on GitHub.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9480589>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9516450
.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521078 .
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521340>.
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9521975 .
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub
<https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9522364 .
— Reply to this email directly or view it on GitHub<
https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9540997>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9549199 .
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9553350>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub <https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9559319 .
— Reply to this email directly or view it on GitHub< https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9577943>.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9587499.
— Reply to this email directly or view it on GitHubhttps://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9589815.
Best Regards, Yoyo Chen
— Reply to this email directly or view it on GitHub https://github.com/InCNTRE/FlowScale/issues/30#issuecomment-9591754.
Currently there are three classes handling IP addresses and subnets
edu.iu.incntre.flowscale.IPAddress edu.iu.incntre.flowscale.IPAddressUtility grnoc.net.util.ipaddress.IPv4Address
consider merging them ?