search

Indian-Piyush / open-hardware-monitor

Automatically exported from code.google.com/p/open-hardware-monitor
0 stars 0 forks source link

Add Winbond W83L771 support for Zotac IONITX motherboards #311

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 
I expect to see the motherboard details, along with the temperatures onboard. I 
see instead 'To be Filled by OEM', and no other details. When I use SpeedFan or 
another temperature program, it shows Local, Remote, and Ambient just fine. I 
ran as Administrator, and even tried to use the open source to detect it, same 
result.

I'm using OHM 4.0 on Windows Xp 32-bit

My Report is attached:

Original issue reported on code.google.com by Cre...@gmail.com on 11 Jan 2012 at 7:40

Attachments:

GoogleCodeExporter commented 9 years ago 
What kind of hardware is this (mainboard?)

Can you post reports / dumps of other tools where you get sensor data from the 
mainboard?

Original comment by moel.mich on 11 Jan 2012 at 8:21

GoogleCodeExporter commented 9 years ago 
The motherboard is a Zotac IONITX.

Do you know where to find the dumps from other programs? (SpeedFan,etc). I 
attached screenshots, but I doubt they will be much help.

Original comment by Cre...@gmail.com on 11 Jan 2012 at 9:14

Attachments:

GoogleCodeExporter commented 9 years ago 
did any of these help?

Original comment by Cre...@gmail.com on 12 Jan 2012 at 7:35

GoogleCodeExporter commented 9 years ago 
I also found this:
http://ubuntuforums.org/showthread.php?t=1199797&page=3

Original comment by Cre...@gmail.com on 12 Jan 2012 at 8:16

GoogleCodeExporter commented 9 years ago 
This mainboard seems to use a Winbond W83L771, which is attached to the SMBus. 
This is currently not supported by the Open Hardware Monitor, because we do not 
support the SMBus at all atm. Once SMBus support has been added one can start 
looking into adding support for this. 

We will need a datasheet for the Winbond W83L771 as well.

Original comment by moel.mich on 12 Jan 2012 at 8:48

GoogleCodeExporter commented 9 years ago 
Hi. I send you an email at your *.ch address with the datasheet I found.

Original comment by Cre...@gmail.com on 13 Jan 2012 at 8:37

GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
[deleted comment]
GoogleCodeExporter commented 9 years ago 
Thank you very much for the datasheet. I have already some prototype SMBus 
code, I will have to see how much work is needed to complete it and add support 
for this chip.

Original comment by moel.mich on 16 Jan 2012 at 8:05

GoogleCodeExporter commented 9 years ago 
Thank you so much for your work :)

Let me know if anything else is needed

Original comment by Cre...@gmail.com on 17 Jan 2012 at 11:25