search

Jorre05 / micronova

Micronova based pellet stove ESPhome component
15 stars 8 forks source link

Adjusting the addresses of sensors or switches #12

Open geraldFS opened 1 week ago

geraldFS commented 1 week ago

Hello,

is there a way to manually influence the addresses of the sensors?

For example, I have a different address for the flue gas define waterTempAddr 0x03 I use an ITC Layma (18Kw) works with the Micronova Mod 0047 EVO.

How can I create additional sensors? Addresses are known.

ricardocb commented 1 week ago

Hi,

In the documentation, is there that you can create :

memory_address_sensor: memory_location: 0x20 memory_address: 0x7d name: Custom Adres sensor

In the Name you can define a custom name.

Also the property memory_location and memory_address can be defined for any sensor that you use, like this:

sensor:

geraldFS commented 2 days ago

Since my oven has significantly more sensors, I would like to create several, not just one, one works but how can I create four additional sensors - head scratching

ricardocb commented 1 day ago

Hi!

I think the cod doesn't support that... I only supports on "custom sensor".

I want to do the same think in my spare time, so check my fork in the future - If I have spare time maybe i will push something ther....

RP

Gerald @.***> escreveu (sexta, 29/11/2024 à(s) 14:36):

Since my oven has significantly more sensors, I would like to create several, not just one, one works but how can I create four additional sensors - head scratching

— Reply to this email directly, view it on GitHub https://github.com/Jorre05/micronova/issues/12#issuecomment-2507939326, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAS5ITLBYZZYH7JOUVB2DPD2DB3W5AVCNFSM6AAAAABSK7XTZ6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKMBXHEZTSMZSGY . You are receiving this because you commented.Message ID: @.***>