Closed andreacampanella closed 6 years ago
Wel, it seemed you did not select a device. Did you add something like .. -DDABSTICK=ON to the cmke command?
2017-04-25 21:34 GMT+02:00 Andrea Campanella notifications@github.com:
I'm running dab_cmdline on a raspberry pi 2 but I'm receiving this message :
"it appeared that you did not select a device, you can run, but you will be connected to a virtual device, only providing zeros"
my lsusb
Bus 001 Device 005: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
the usb stick works properly with rtl_fm , I have no idea how to solve this honestly...
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/JvanKatwijk/dab-cmdline/issues/10, or mute the thread https://github.com/notifications/unsubscribe-auth/AITzwAQYq_URQclIT1YEvxd_bkaFQvxnks5rzkrhgaJpZM4NH9E6 .
-- Jan van Katwijk
+31 (0)15 3698980 +31 (0) 628260355
oh, yes, that was it, now it recognise the stick but it can't find an ensemble: "waited for an ensemble, an ensemble is not found no ensemble, quittingofdmProcessor is shutting down" any idea?
It is pretty tough without any further indication to locate the ensemble. What I normally do is to set the gain to a value that I have seen working with qt-dab
2017-04-26 12:21 GMT+02:00 Andrea Campanella notifications@github.com:
oh, yes, that was it, now it recognise the stick but it can't find an ensemble: "waited for an ensemble, an ensemble is not found no ensemble, quittingofdmProcessor is shutting down" any idea?
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/JvanKatwijk/dab-cmdline/issues/10#issuecomment-297338982, or mute the thread https://github.com/notifications/unsubscribe-auth/AITzwBAHTAG45v437JaPN-vQ1BADVS3xks5rzxq_gaJpZM4NH9E6 .
-- Jan van Katwijk
+31 (0)15 3698980 +31 (0) 628260355
I'm running dab_cmdline on a raspberry pi 2 but I'm receiving this message :
"it appeared that you did not select a device, you can run, but you will be connected to a virtual device, only providing zeros"
my lsusb
Bus 001 Device 005: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
the usb stick works properly with rtl_fm , I have no idea how to solve this honestly...