Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
yesterday I have changed to the Alex-Marlin firmware. Now I have unfortunately the following problem, whenever I want to level the bed on my Voxelab Aquila X2 N32, I get the error Min-Temp error. Of course I try to level the bed at 60 degrees and no matter if I use the preheat function or set the temperature manually to 60 degrees. This means the following:
preheat PLA activated
z-axis wants to reference itself (homing)
the BL-Touch touches the heating plate the temperature of bed and nozzle shows 0 degrees Celsius
error is set.
Wiring all fits, I have been using the sensor or setup for over a year with no problems.
Even if I want to start a print just nothing works.
Hello,
yesterday I have changed to the Alex-Marlin firmware. Now I have unfortunately the following problem, whenever I want to level the bed on my Voxelab Aquila X2 N32, I get the error Min-Temp error. Of course I try to level the bed at 60 degrees and no matter if I use the preheat function or set the temperature manually to 60 degrees. This means the following:
Wiring all fits, I have been using the sensor or setup for over a year with no problems.
Even if I want to start a print just nothing works.