search

Klipper3d / klipper

Klipper is a 3d-printer firmware
GNU General Public License v3.0
9.37k stars 5.29k forks source link

btt skr 1.0 board cr6se not autoleveling. #4510

Closed awright424 closed 3 years ago

awright424 commented 3 years ago

klippy (1).log

I used the latest printer config for the cr6se using the btt skr 1.0 for the cr6se. Everything seems to be working except for bed leveling. when I attempt to home which it does to a certain extent it stops once triggered by the optical z endstop. using the default firmware it would use the optical sensor along with the strain gauge. On my other printer using the stock board it uses probe:z_virtual_endstop that doesnt work with the btt skr 1.0 board for the cr6se. I am not sure how the strain gauge should be used on this board.

awright424 commented 3 years ago

so from looking at the commits from the board itself it looks as though the config that you guys settled on was for more of a "generic" base you could call it. I see where some sections were removed regarding the loadcell etc. I'll test the config from that point and see if it works. I understand that this board could be used with a different printer but it was definitely more of a drop in board for the cr6se or the cr6se max. At this point I should be able to get my printer going with a microswiss hotend and an orbiter working well. thanks for the great firmware etc.