A library for interfacing with Texas Instruments BQ25703A battery charger chip. This chip has a comprehensive set of capabilities and many settings required to use it properly, so reading through the data sheet is a must. You will need to refer to the TI data sheet to get a description of all the different registers http://www.ti.com/lit/ds/symlink/bq25703a.pdf This library enables easy reading and writing of the registers. The data is organised into a data structure similar to that outlined in the TRM and for each entry includes the value, address and data type.
| MCU | Tested Works | Doesn't Work | Not Tested | Notes |
|---|---|---|---|---|
| Atmega328 @ 16MHz | X | |||
| Atmega328 @ 12MHz | X | |||
| Atmega32u4 @ 16MHz | X | |||
| Atmega32u4 @ 8MHz | X | |||
| ESP8266 | X | |||
| ESP32 | X | |||
| Atmega2560 @ 16MHz | X | |||
| ATSAM3X8E | X | |||
| ATSAM21D | X | |||
| ATtiny85 @ 16MHz | X | |||
| ATtiny85 @ 8MHz | X | |||
| Intel Curie @ 32MHz | X | |||
| STM32F2 | X | |||
| Teensy 3.2 | X |