Re-do all routing #2 - Githubissues

MEGA65 / megaphone-r4-pcb

MEGAphone PCB redesign under NLnet Foundation grant

2 stars 1 forks source link

Closed ifadiga closed 2 years ago

ifadiga commented 2 years ago

All routing is done and some nets are re-routed after feedback. Please review and provide feedback.

DRC errors explain:

Hole to hole clearance -3 error because vias on the pad (component M3) are too close to hole 3
Net antennae - 52 error because the track on button is an antenna and Altium shows error for this
Short circuit- 27 error because 25 vias were placed on the pad on component M3 and a hole is placed on the pad on the same component. Hole is placed on pad on component D10.

davidzovko commented 2 years ago

@goran-mahovlic please take a look, we should have covered everything now. Let us know if anything else needs tweaking.

goran-mahovlic commented 2 years ago

@goran-mahovlic please take a look, we should have covered everything now. Let us know if anything else needs tweaking.

Could you also merge dev-soldered into main branch I thing you did one commit to main branch so it is not possible to do merging automatically?

davidzovko commented 2 years ago

Sorry about that. If you think of https://github.com/MEGA65/megaphone-pcb-2020/commit/10e52faadba3a994d8e5033e3151af0665c72aee , that's a mistake and is already part of the dev-soldered branch. So it can be merged without changes. I will proceed like that.

goran-mahovlic commented 2 years ago

@davidzovko @ifadiga and please after merging into main if possible export gerber files to production folder.

davidzovko commented 2 years ago

@ifadiga please do as Goran suggests above, export the gerber files to the "production" folder.