search

MKFirmware / MarlinKimbra

📟 MK 3D Printer Firmware for Arduino
52 stars 39 forks source link

z probe servo not work anet a8 #180

Open ISU000 opened 6 years ago

ISU000 commented 6 years ago

hi, i test in all input 27,28,29,30 but with m280 don't move servo (3D Touch) the 3D Touch with marlin 3.1.6 in my anet work well but without nextion 7 lcd.

This is my configuration: Configuration_Overall.h.zip

MagoKimbra commented 6 years ago

define SERVO0_PIN 30 in configuration_overall????? WHY??? The pin is defined in configuration_pins!!

ISU000 commented 6 years ago

Yes i know but in original input 27 in board 100 anet when i put servo cable de light 1 go on, for test i change inputs in board configuration 27,28,29,30 and 30 servo dont move, i test with normal servo and not move. In marlin 3.1.6 with anet board work perfect.

I put in overall for make test but servo not work. This moning i test with ramps 1.4 board and work perfect.

Thanks Iker

El 27 dic. 2017 15:51, "MagoKimbra" notifications@github.com escribió:

define SERVO0_PIN 30 in configuration_overall????? WHY??? The pin is defined in configuration_pins!!

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub, or mute the thread.

MagoKimbra commented 6 years ago

Ok you must change on your board file

ISU000 commented 6 years ago

Yes

El 27 dic. 2017 17:07, "MagoKimbra" <notifications@github.com mailto:notifications@github.com> escribió: Ok you must change on your board file

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/MKFirmware/MarlinKimbra/issues/180#issuecomment-354135293, or mute the thread https://github.com/notifications/unsubscribe-auth/AhOSGmOAdjjm7ino4vMKqAWLdX167jmGks5tEmsngaJpZM4RMUGO.