Open Zivisio opened 6 years ago
Same. Installed drivers, rebooted, and running ProconXInput.exe gives "Unable to connect to ScpVBus. Press any key to continue..." even when run as admin.
I also tried a manual installation of ScpVBus as documented in the README. Same result.
After installing SCPToolkit from https://github.com/nefarius/ScpToolkit and attempting to reinstall the drivers I get this output:
Administrative permissions required. Checking permissions... Installing system drivers... Device node created. Install is complete when drivers are installed... Updating drivers for Root\ScpVBus from C:\Users\robin\Downloads\ProconXInput_v0.1-alpha2_release2_64-bit\Drivers\ScpVBus\ScpVBus.inf. Drivers installed successfully. Device node created. Install is complete when drivers are installed... Updating drivers for Root\HidGuardian from C:\Users\robin\Downloads\ProconXInput_v0.1-alpha2_release2_64-bit\Drivers\HidGuardian\HidGuardian.inf. Drivers installed successfully. Class filters changed. Restart the devices or reboot the system to make the change effective. HidGuardian HidGuardian HidGuardian Installing HidCerberus.Srv... Configuration Result: [Success] Name HidCerberus.Srv [Success] DisplayName HidCerberus Service [Success] Description HidCerberus Configuration Host for HidGuardian Filter Drivers [Success] ServiceName HidCerberus.Srv Topshelf v4.0.0.0, .NET Framework v4.0.30319.42000 The HidCerberus.Srv service is already installed. 'ping' is not recognized as an internal or external command, operable program or batch file. 'net' is not recognized as an internal or external command, operable program or batch file. 'ping' is not recognized as an internal or external command, operable program or batch file. 'wscript' is not recognized as an internal or external command, operable program or batch file. Press any key to continue . . .
When attempting to launch ScpToolkit Service Manager, I get the error "Couldn't fetch configuration. Couldn't request configuration, make sure the SCP DSx service is running!"
A little more googling brought me here https://github.com/nefarius/ScpToolkit/issues/528, which points to device manager where my Scp Virtual Bus Driver was disabled. The issue recommends disabling secure boot in the BIOS. After doing so the device manager error is resolved when I plug in the controller.
The service still won't run, but now when I launch ProconXInput.exe it says:
Initialized HidCerberus. Unable to find controller. Press any key to continue...
Not sure if any of this is helpful.
i also have his problem :(
As am I
Does Anyone have a solution for this?
installed drivers restarted and went to go load procon got this msg