search

Makerr-Studio / CentrifugalDustSeparator-

Centrifugal Dust Separator - 3D Files for printing
MIT License
107 stars 18 forks source link

US - Parts Deals - and typo in README.md #14

Open ver2go opened 2 weeks ago

ver2go commented 2 weeks ago

Not an issue, but wanted to share deals I found for parts. Please delete if not appropriate, or if there is a suggestion for a better place to post.

US only

Clear PVC 6" - this is a clearance sale, so once stock runs out there will be no more https://www.woodcraft.com/products/woodriver-dust-connection-clear-pvc-tube-36-x-6 Free Shipping with Code "PENCIL" $20 each

Festool Storage VAB-20/3 $79.60 set of 3 - Free shipping https://www.hartvillehardware.com/product/sku-1337339/festool-dust-extractors-accessories

An Issue (typo) https://github.com/Makerr-Studio/CentrifugalDustSeparator-/blob/main/README.md?plain=1#L48-L49 jet = yet?

voron69-bit commented 2 weeks ago

Not an issue, but wanted to share deals I found for parts. Please delete if not appropriate, or if there is a suggestion for a better place to post.

US only

Clear PVC 6" - this is a clearance sale, so once stock runs out there will be no more https://www.woodcraft.com/products/woodriver-dust-connection-clear-pvc-tube-36-x-6 Free Shipping with Code "PENCIL" $20 each

  • note, scale to 99.6% seems to work for me. The scale ring indicated 100%. ** note number 2, the scale ring doesn't need walls so thick. I did a quick hack in Freecad and it cut the print time in half. Not sure if that's why it showed 100%, but I only cut out the ID of the scale ring

Festool Storage VAB-20/3 $79.60 set of 3 - Free shipping https://www.hartvillehardware.com/product/sku-1337339/festool-dust-extractors-accessories

An Issue (typo) https://github.com/Makerr-Studio/CentrifugalDustSeparator-/blob/main/README.md?plain=1#L48-L49 jet = yet?

Not sure what you're talking about the scale ring, but I've already got all my parts printed, and O rings installed. Does this 6" pvc work or not? I'm not reprinting or buying new orings.

asucks commented 5 days ago

Does this 6" pvc work or not? I'm not reprinting or buying new orings.

These clearance 6" PVC tubes are the same as the original 6" PVC tubes linked. I got the clearance ones this morning and they are identical.

voron69-bit commented 5 days ago

Does this 6" pvc work or not? I'm not reprinting or buying new orings.

These clearance 6" PVC tubes are the same as the original 6" PVC tubes linked. I got the clearance ones this morning and they are identical.

They are not. I too bought the clearance ones, and you have to reduce all the parts to 99.2%

ver2go commented 5 days ago

Does this 6" pvc work or not? I'm not reprinting or buying new orings.

These clearance 6" PVC tubes are the same as the original 6" PVC tubes linked. I got the clearance ones this morning and they are identical. I thought they were where I looked at the specs compared to the powertec ones. I figured they were both imported/own from the same company.

I didn't have an original powertec one to confirm.

Did you have to scale yours? 99.6% for for me. 100% didn't on my first inletnprint test.

asucks commented 5 days ago

They are not. I too bought the clearance ones, and you have to reduce all the parts to 99.2%

Maybe they are on clearance because of slight manufacturing differences? Or maybe they are poorly cut and the edges just need to be deburred?

Did you have to scale yours? 99.6% for for me.

What material did you print with?

Can you guys measure the inside ID with calipers? I have several of them so I can take some measurements soon.

voron69-bit commented 5 days ago

Yeah probably a manufacturer issue, since they are clearance. I print in ABS, and my printer is good out to 0.05 XYZ accuracy. So I know its not my prints. ID of this clearance tube is anywhere from 145.27 to 145.59. I could have gone SLIGHTLY larger than 99.2, but 99.3% was too snug and 99.2% fit just fine. I wasn't about to get in the weeds over a fraction of a percent.