search

MarkusMcNugen / docker-qBittorrentvpn

Docker container which runs a headless qBittorrent client with WebUI and optional OpenVPN
https://hub.docker.com/r/markusmcnugen/qbittorrentvpn/
GNU General Public License v3.0
168 stars 92 forks source link

[ERROR] Network is down. Exiting.. #108

Closed tiritibambix closed 2 years ago

tiritibambix commented 2 years ago

Hello !

So I have installed qbittorentvpn through a simple stack in portainer. I use trigus42/qbittorrentvpn as it is ARM64 compatible.

---
version: "3"
services:
  qbittorrentvpn:
    image: trigus42/qbittorrentvpn
    container_name: qbittorrentvpn
    privileged: true   
    environment:
      - VPN_USERNAME=myvpnusername
      - VPN_PASSWORD=myvpnpassword
      - PUID=998 #optional
      - PGID=100 #optional
      - WEBUI_PORT_ENV=8991 #optional
      - INCOMING_PORT_ENV=8999 #optional
      - VPN_ENABLED=yes
      - LAN_NETWORK=192.168.1.0/24
      - NAME_SERVERS=8.8.8.8,8.8.4.4
    ports:
      - 8991:8080
      - 8999:8999
      - 8999:8999/udp
    volumes:
      - /srv/dev-disk-by-uuid-e782a243-3842-48b2-8144-c7e79db17f49/Files/QBittorentVPN/config:/config
      - /srv/dev-disk-by-uuid-e782a243-3842-48b2-8144-c7e79db17f49/Files/QBittorentVPN/downloads:/downloads
    restart: unless-stopped

I changed default WEBUI_PORT_ENV to 8991 as 8080 is already in use on my system.

I downloaded the .conf file from my vpn provider and renamed it wg0.conf and placed it in /srv/.../Files/QBittorentVPN/config/wireguard/

I get this log :

[#] ip link set mtu 1420 up dev wg0,
[#] resolvconf -a wg0 -m 0 -x,
[#] wg set wg0 fwmark 51820,
[#] ip -4 route add 0.0.0.0/0 dev wg0 table 51820,
[#] ip -4 rule add not fwmark 51820 table 51820,
[#] ip -4 rule add table main suppress_prefixlength 0,
[#] sysctl -q net.ipv4.conf.all.src_valid_mark=1,
[#] iptables-restore -n,
--------------------,
[cont-init.d] 02-vpn: exited 0.,
[cont-init.d] 03-network: executing... ,
2021-10-19 15:22:13 [INFO] Docker network defined as 192.168.16.0/20,
2021-10-19 15:22:13 [INFO] Adding 192.168.1.0/24 as route via docker eth0,
[cont-init.d] 03-network: exited 0.,
[cont-init.d] 04-qbittorrent-setup: executing... ,
2021-10-19 15:22:13 [WARNING] ENABLE_SSL is set to , SSL is not enabled. This could cause issues with logging if other apps use the same Cookie name (SID).,
2021-10-19 15:22:13 [WARNING] If you manage the SSL config yourself, you can ignore this.,
2021-10-19 15:22:13 [WARNING] UMASK not defined (via -e UMASK), defaulting to '002',
[cont-init.d] 04-qbittorrent-setup: exited 0.,
[cont-init.d] 05-install: executing... ,
[cont-init.d] 05-install: exited 0.,
[cont-init.d] done.,
[services.d] starting services,
2021-10-19 15:22:13 [INFO] Logging to /config/qBittorrent/data/logs/qbittorrent.log.,
[services.d] done.,
2021-10-19 15:22:13 [INFO] Trying to ping 1.1.1.1 and 8.8.8.8 over the docker interface for 500ms each...,
Terminated,
Terminated,
2021-10-19 15:22:15 [INFO] Success: Could not connect. This means the firewall is most likely working properly.,
2021-10-19 15:22:16 [INFO] qBittorrent started with PID 491,
2021-10-19 15:22:16 [INFO] HEALTH_CHECK_HOST is not set. Using default host one.one.one.one,
2021-10-19 15:22:16 [INFO] HEALTH_CHECK_INTERVAL is not set. Using default interval of 5s,
2021-10-19 15:22:41 [ERROR] Network is down. Exiting..,
[cont-finish.d] executing container finish scripts...,
[cont-finish.d] done.,
[s6-finish] waiting for services.,
[s6-finish] sending all processes the TERM signal.,
[s6-finish] sending all processes the KILL signal and exiting.,
[s6-init] making user provided files available at /var/run/s6/etc...exited 0.,
[s6-init] ensuring user provided files have correct perms...exited 0.,
[fix-attrs.d] applying ownership & permissions fixes...,
[fix-attrs.d] done.,
[cont-init.d] executing container initialization scripts...,
[cont-init.d] 01-environment: executing... ,
2021-10-19 15:22:51 [INFO] LAN_NETWORK defined as '192.168.1.0/24',
2021-10-19 15:22:51 [INFO] PUID defined as 998,
2021-10-19 15:22:51 [INFO] PGID defined as 100,
2021-10-19 15:22:51 [INFO] An user with PUID 998 already exists in /etc/passwd, nothing to do.,
2021-10-19 15:22:51 [INFO] VPN_ENABLED defined as 'yes',
2021-10-19 15:22:51 [WARNING] VPN_TYPE not set, defaulting to Wireguard.,
2021-10-19 15:22:51 [INFO] NAME_SERVERS defined as '8.8.8.8,8.8.4.4',
2021-10-19 15:22:51 [INFO] Adding 8.8.8.8 to resolv.conf,
2021-10-19 15:22:51 [INFO] Adding 8.8.4.4 to resolv.conf,
[cont-init.d] 01-environment: exited 0.,
[cont-init.d] 02-vpn: executing... ,
2021-10-19 15:22:51 [INFO] WireGuard config file is found at /config/wireguard/wg0.conf,
dos2unix: converting file /config/wireguard/wg0.conf to Unix format...,
2021-10-19 15:22:51 [INFO] VPN remote line defined as '185.144.83.11:51820',
2021-10-19 15:22:51 [INFO] VPN_REMOTE defined as '185.144.83.11',
2021-10-19 15:22:51 [INFO] VPN_PORT defined as '51820',
2021-10-19 15:22:51 [INFO] VPN_PROTOCOL set as 'udp', since WireGuard is always udp.,
2021-10-19 15:22:51 [INFO] VPN_DEVICE_TYPE set as 'wg0', since WireGuard will always be wg0.,
2021-10-19 15:22:51 [INFO] Starting WireGuard...,
--------------------,
Warning: `/config/wireguard/wg0.conf' is world accessible,
[#] ip link add wg0 type wireguard,
[#] wg setconf wg0 /dev/fd/63,
[#] ip -4 address add 10.100.0.173/32 dev wg0,
[#] ip link set mtu 1420 up dev wg0,
[#] resolvconf -a wg0 -m 0 -x,
[#] wg set wg0 fwmark 51820,
[#] ip -4 route add 0.0.0.0/0 dev wg0 table 51820,
[#] ip -4 rule add not fwmark 51820 table 51820,
[#] ip -4 rule add table main suppress_prefixlength 0,
[#] sysctl -q net.ipv4.conf.all.src_valid_mark=1,
[#] iptables-restore -n,
--------------------,
[cont-init.d] 02-vpn: exited 0.,
[cont-init.d] 03-network: executing... ,
2021-10-19 15:22:52 [INFO] Docker network defined as 192.168.16.0/20,
2021-10-19 15:22:52 [INFO] Adding 192.168.1.0/24 as route via docker eth0,
[cont-init.d] 03-network: exited 0.,
[cont-init.d] 04-qbittorrent-setup: executing... ,
2021-10-19 15:22:52 [WARNING] ENABLE_SSL is set to , SSL is not enabled. This could cause issues with logging if other apps use the same Cookie name (SID).,
2021-10-19 15:22:52 [WARNING] If you manage the SSL config yourself, you can ignore this.,
2021-10-19 15:22:52 [WARNING] UMASK not defined (via -e UMASK), defaulting to '002',
[cont-init.d] 04-qbittorrent-setup: exited 0.,
[cont-init.d] 05-install: executing... ,
[cont-init.d] 05-install: exited 0.,
[cont-init.d] done.,
[services.d] starting services,
2021-10-19 15:22:52 [INFO] Logging to /config/qBittorrent/data/logs/qbittorrent.log.,
[services.d] done.,
2021-10-19 15:22:52 [INFO] Trying to ping 1.1.1.1 and 8.8.8.8 over the docker interface for 500ms each...,
Terminated,
Terminated,
2021-10-19 15:22:54 [INFO] Success: Could not connect. This means the firewall is most likely working properly.,
2021-10-19 15:22:54 [INFO] qBittorrent started with PID 492,
2021-10-19 15:22:54 [INFO] HEALTH_CHECK_HOST is not set. Using default host one.one.one.one,
2021-10-19 15:22:54 [INFO] HEALTH_CHECK_INTERVAL is not set. Using default interval of 5s

I can't access webui.

What am I doing wrong ?

tiritibambix commented 2 years ago

Ok, so. So far, I have tried this :

I'm clueless !

tiritibambix commented 2 years ago

So I tried something, because why not.

I created a proxy host in nginx proxy manager pointing to my container. I CAN ACESS THE UI, but can't do anything : "qBittorrent client is not reachable"

tiritibambix commented 2 years ago

If anyone is interested I just switched browsers. From Vivaldi to Brave....