ObsessiveCompulsiveAudiophile
commented
3 months ago Script has completed optimization without any errors. Uploading to the app happens with some Android versions unless you use Google cloud drive. You will find info about it in the YT comments.
Sent from Gmail Mobile
On Wed 3. Apr 2024 at 20:52, amibumping @.***> wrote:
Hi, I did all the steps in the video, but when loading the .ady file into the app, it says it is not a correct ady file.
I attach the .ady file. I have compared with the original, and I see a lot of "0" in all channels measures.
The log on audyssey one is this:
7:33:14 PM [INFO] Based on your AVR model - Denon AVR-X1600H, speed of sound has been set to 300.0 m/s for all distance calculations. 7:33:14 PM [WARNING] - if you believe this setting is not correct for your receiver model, please notify OCA! 7:33:14 PM [INFO]
7:33:14 PM [LOG] Applying Target Curve located @ D:\Portatil\Downloads\DrTooleTargetCurve.txt 7:33:14 PM [INFO]
7:33:14 PM [INFO] Optimization process started... 7:33:14 PM [LOG] Transposing measurements from '3' different microphone positions to the primary listening position... 7:33:17 PM [INFO] Done! 7:33:17 PM [INFO]
7:33:17 PM [INFO] Cleaning up processed measurements... 7:33:21 PM [LOG] Done! 7:33:21 PM [INFO]
7:33:21 PM [LOG] Calculating precise speaker volume levels... 7:33:21 PM [LOG] Co: 79.6799791574478 dB 7:33:22 PM [LOG] FLo: 76.64082508087158 dB 7:33:22 PM [LOG] FRo: 79.32231740951536 dB 7:33:22 PM [LOG] SLAo: 79.84251449108123 dB 7:33:22 PM [LOG] SRAo: 79.41365382671356 dB 7:33:22 PM [INFO] Optimized target volume level for all speakers: 78.97985799312592 dB 7:33:22 PM [INFO] Total number of speakers averaged (excludes subwoofer): 5 7:33:22 PM [LOG] Finalized speaker volume settings: 7:33:22 PM [LOG] C: -0.5 ; with -0.2001211643218852 dB filter compensation 7:33:22 PM [LOG] FL: 2.5 ; with -0.16096708774566082 dB filter compensation 7:33:22 PM [LOG] FR: -0.5 ; with 0.15754058361055456 dB filter compensation 7:33:22 PM [LOG] SLA: -1.0 ; with 0.13734350204468626 dB filter compensation 7:33:22 PM [LOG] SRA: -0.5 ; with 0.06620416641236204 dB filter compensation 7:33:22 PM [INFO] Optimizing subwoofer volume adjustment... 7:33:23 PM [LOG] SW1: 0.0 dB ; with -0.06 dB filter compensation 7:33:23 PM [INFO]
7:33:23 PM [INFO] Deriving optimal speaker distances with advanced cross-correlation analysis... 7:33:24 PM [LOG] C: 2.73m 7:33:24 PM [LOG] FL: 2.69m 7:33:24 PM [LOG] FR: 2.93m 7:33:24 PM [LOG] SLA: 1.52m 7:33:24 PM [LOG] SRA: 1.9m 7:33:24 PM [LOG] SW1: 10.7m 7:33:24 PM [WARNING] Calculated optimal subwoofer distance of 10.71m exceeds AV Receiver's max. speaker spacing limit [9.19m vs 6.00m]! 7:33:24 PM [INFO] Attempting to re-align the sub... 7:33:24 PM [INFO] Subwoofer distance is re-set to 3.29m and is now within receiver speaker spacing limits [1.77m vs 6.00m]. 7:33:24 PM [INFO]
7:33:24 PM [INFO] Crafting custom room correction filters... 7:33:28 PM [LOG] Optimal filter generation for speaker C is completed. 7:33:32 PM [LOG] Optimal filter generation for speaker FL is completed. 7:33:36 PM [LOG] Optimal filter generation for speaker FR is completed. 7:33:40 PM [LOG] Optimal filter generation for speaker SLA is completed. 7:33:45 PM [LOG] Optimal filter generation for speaker SRA is completed. 7:33:49 PM [LOG] Optimal filter generation for speaker SW1 is completed. 7:33:50 PM [LOG] Done! 7:33:50 PM [INFO]
7:33:50 PM [INFO] Pinpointing crossover frequencies for each speaker... 7:33:50 PM [LOG] Optimal crossover frequency for speaker C: 54.93165Hz, closest receiver XO freq: 60Hz 7:33:50 PM [LOG] - @ 60Hz - phase difference with SW: -95.08 degrees, phase delay: -4.40 ms 7:33:51 PM [LOG] Optimal crossover frequency for speaker FL: 41.74805Hz, closest receiver XO freq: 40Hz 7:33:51 PM [LOG] - @ 40Hz - phase difference with SW: -48.99 degrees, phase delay: -3.40 ms 7:33:51 PM [LOG] Optimal crossover frequency for speaker FR: 49.80470Hz, closest receiver XO freq: 40Hz 7:33:51 PM [LOG] - @ 40Hz - phase difference with SW: -28.74 degrees, phase delay: -2.00 ms 7:33:51 PM [LOG] Optimal crossover frequency for speaker SLA: 54.19923Hz, closest receiver XO freq: 60Hz 7:33:51 PM [LOG] - @ 60Hz - phase difference with SW: 12.17 degrees, phase delay: 0.56 ms 7:33:52 PM [LOG] Optimal crossover frequency for speaker SRA: 93.75002Hz, closest receiver XO freq: 90Hz 7:33:52 PM [LOG] - @ 90Hz - phase difference with SW: 58.85 degrees, phase delay: 1.82 ms 7:33:52 PM [LOG] Subwoofer measures flat down to 23.80372Hz! 7:33:52 PM [INFO] Done! 7:33:52 PM [INFO] All crossover frequencies below 80Hz were set to 80Hz to reduce the workload on the amplifier and speaker drivers, and to improve clarity. 7:33:52 PM [INFO] Feel free to lower the crossover frequencies if you're using power amplifiers or high-sensitivity speakers, but be cautious to remain above the calculated frequencies shown above. 7:33:52 PM [INFO] For speaker pairs with different crossover frequencies, the AV receiver will synchronize them to the lower frequency of the two. 7:33:52 PM [INFO]
7:33:52 PM [INFO] Uploading all optimization adjustments into the final calibration file... 7:33:54 PM [INFO]
7:33:54 PM [LOG] 'AUDYSSEY ONE' optimization has been completed with SUCCESS in 39.219 seconds! 7:33:54 PM [INFO]
7:33:54 PM [INFO]
7:33:54 PM [INFO] When prompted, save the .ady file to your PC and send it 'as is' to your MultEQ Editor app. 7:33:54 PM [INFO] Next, transfer it 'as is' from the app to your AV receiver as you normally would. 7:33:54 PM [INFO] The Editor app graphs will no longer represent final speaker responses due to the special filtering technique implemented. 7:33:54 PM [INFO] Speaker responses with 'final' indices under REW / All SPL tab are your expected post-calibration responses. 7:33:54 PM [INFO]
7:33:54 PM [INFO] YouTube video (https://youtu.be/iU1ZBsru76M) contains a download link for several Dolby Atmos & DTS-X test clips 7:33:54 PM [INFO] compatible for playback via a USB key on your Blu-ray player for testing. 7:33:54 PM [INFO]
7:33:54 PM [INFO] Enjoy your new sound! default(1)_OneOptimized.zip
I saw on a comment in youtube something related, but Audyssey One didn't ask nothing
***Important: I have figured the reason behind the rare 0m distance problem thanks to calibration file shared by @matten545.
If Audyssey measures your subwoofer's actual required delay (distance) higher than the 6m speaker spacing limit, it will set all speaker distances in the ady file to 0!!!! The app then sets the subwoofer distance to the maximum allowed and fills up the rest of the speakers accordingly. The only work around that was to ask the user for a distance estimate which is now added in the script.
So, if the script is asking you to manually enter your center speaker distance, it's ONLY because even Audyssey has found that your subwoofer requires a delay larger than the maximum distance limit.
— Reply to this email directly, view it on GitHub https://github.com/ObsessiveCompulsiveAudiophile/AudysseyOne/issues/13, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACLH4TD2RH7JGUXHVNRU2ITY3Q6VJAVCNFSM6AAAAABFVZJ4U6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGIZDGNJVGIZTCNQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>
amibumping
Hi, I did all the steps in the video, but when loading the .ady file into the app, it says it is not a correct ady file.
I attach the .ady file. I have compared with the original, and I see a lot of "0" in all channels measures.
The log on audyssey one is this:
7:33:14 PM [INFO] Based on your AVR model - Denon AVR-X1600H, speed of sound has been set to 300.0 m/s for all distance calculations. 7:33:14 PM [WARNING] - if you believe this setting is not correct for your receiver model, please notify OCA! 7:33:14 PM [INFO] ************************************************************************************************************************ 7:33:14 PM [LOG] Applying Target Curve located @ D:\Portatil\Downloads\DrTooleTargetCurve.txt 7:33:14 PM [INFO] ************************************************************************************************************************ 7:33:14 PM [INFO] Optimization process started... 7:33:14 PM [LOG] Transposing measurements from '3' different microphone positions to the primary listening position... 7:33:17 PM [INFO] Done! 7:33:17 PM [INFO] ************************************************************************************************************************ 7:33:17 PM [INFO] Cleaning up processed measurements... 7:33:21 PM [LOG] Done! 7:33:21 PM [INFO] ************************************************************************************************************************ 7:33:21 PM [LOG] Calculating precise speaker volume levels... 7:33:21 PM [LOG] Co: 79.6799791574478 dB 7:33:22 PM [LOG] FLo: 76.64082508087158 dB 7:33:22 PM [LOG] FRo: 79.32231740951536 dB 7:33:22 PM [LOG] SLAo: 79.84251449108123 dB 7:33:22 PM [LOG] SRAo: 79.41365382671356 dB 7:33:22 PM [INFO] Optimized target volume level for all speakers: 78.97985799312592 dB 7:33:22 PM [INFO] Total number of speakers averaged (excludes subwoofer): 5 7:33:22 PM [LOG] Finalized speaker volume settings: 7:33:22 PM [LOG] C: -0.5 ; with -0.2001211643218852 dB filter compensation 7:33:22 PM [LOG] FL: 2.5 ; with -0.16096708774566082 dB filter compensation 7:33:22 PM [LOG] FR: -0.5 ; with 0.15754058361055456 dB filter compensation 7:33:22 PM [LOG] SLA: -1.0 ; with 0.13734350204468626 dB filter compensation 7:33:22 PM [LOG] SRA: -0.5 ; with 0.06620416641236204 dB filter compensation 7:33:22 PM [INFO] Optimizing subwoofer volume adjustment... 7:33:23 PM [LOG] SW1: 0.0 dB ; with -0.06 dB filter compensation 7:33:23 PM [INFO] ************************************************************************************************************************ 7:33:23 PM [INFO] Deriving optimal speaker distances with advanced cross-correlation analysis... 7:33:24 PM [LOG] C: 2.73m 7:33:24 PM [LOG] FL: 2.69m 7:33:24 PM [LOG] FR: 2.93m 7:33:24 PM [LOG] SLA: 1.52m 7:33:24 PM [LOG] SRA: 1.9m 7:33:24 PM [LOG] SW1: 10.7m 7:33:24 PM [WARNING] Calculated optimal subwoofer distance of 10.71m exceeds AV Receiver's max. speaker spacing limit [9.19m vs 6.00m]! 7:33:24 PM [INFO] Attempting to re-align the sub... 7:33:24 PM [INFO] Subwoofer distance is re-set to 3.29m and is now within receiver speaker spacing limits [1.77m vs 6.00m]. 7:33:24 PM [INFO] ************************************************************************************************************************ 7:33:24 PM [INFO] Crafting custom room correction filters... 7:33:28 PM [LOG] Optimal filter generation for speaker C is completed. 7:33:32 PM [LOG] Optimal filter generation for speaker FL is completed. 7:33:36 PM [LOG] Optimal filter generation for speaker FR is completed. 7:33:40 PM [LOG] Optimal filter generation for speaker SLA is completed. 7:33:45 PM [LOG] Optimal filter generation for speaker SRA is completed. 7:33:49 PM [LOG] Optimal filter generation for speaker SW1 is completed. 7:33:50 PM [LOG] Done! 7:33:50 PM [INFO] ************************************************************************************************************************ 7:33:50 PM [INFO] Pinpointing crossover frequencies for each speaker... 7:33:50 PM [LOG] Optimal crossover frequency for speaker C: 54.93165Hz, closest receiver XO freq: 60Hz 7:33:50 PM [LOG] - @ 60Hz - phase difference with SW: -95.08 degrees, phase delay: -4.40 ms 7:33:51 PM [LOG] Optimal crossover frequency for speaker FL: 41.74805Hz, closest receiver XO freq: 40Hz 7:33:51 PM [LOG] - @ 40Hz - phase difference with SW: -48.99 degrees, phase delay: -3.40 ms 7:33:51 PM [LOG] Optimal crossover frequency for speaker FR: 49.80470Hz, closest receiver XO freq: 40Hz 7:33:51 PM [LOG] - @ 40Hz - phase difference with SW: -28.74 degrees, phase delay: -2.00 ms 7:33:51 PM [LOG] Optimal crossover frequency for speaker SLA: 54.19923Hz, closest receiver XO freq: 60Hz 7:33:51 PM [LOG] - @ 60Hz - phase difference with SW: 12.17 degrees, phase delay: 0.56 ms 7:33:52 PM [LOG] Optimal crossover frequency for speaker SRA: 93.75002Hz, closest receiver XO freq: 90Hz 7:33:52 PM [LOG] - @ 90Hz - phase difference with SW: 58.85 degrees, phase delay: 1.82 ms 7:33:52 PM [LOG] Subwoofer measures flat down to 23.80372Hz! 7:33:52 PM [INFO] Done! 7:33:52 PM [INFO] All crossover frequencies below 80Hz were set to 80Hz to reduce the workload on the amplifier and speaker drivers, and to improve clarity. 7:33:52 PM [INFO] Feel free to lower the crossover frequencies if you're using power amplifiers or high-sensitivity speakers, but be cautious to remain above the calculated frequencies shown above. 7:33:52 PM [INFO] For speaker pairs with different crossover frequencies, the AV receiver will synchronize them to the lower frequency of the two. 7:33:52 PM [INFO] *********************************************************************************************************************************** 7:33:52 PM [INFO] Uploading all optimization adjustments into the final calibration file... 7:33:54 PM [INFO] ************************************************************************************************************************ 7:33:54 PM [LOG] 'AUDYSSEY ONE' optimization has been completed with SUCCESS in 39.219 seconds! 7:33:54 PM [INFO] ************************************************************************************************************************ 7:33:54 PM [INFO] ************************************************************************************************************************ 7:33:54 PM [INFO] When prompted, save the .ady file to your PC and send it 'as is' to your MultEQ Editor app. 7:33:54 PM [INFO] Next, transfer it 'as is' from the app to your AV receiver as you normally would. 7:33:54 PM [INFO] The Editor app graphs will no longer represent final speaker responses due to the special filtering technique implemented. 7:33:54 PM [INFO] Speaker responses with 'final' indices under REW / All SPL tab are your expected post-calibration responses. 7:33:54 PM [INFO] ************************************************************************************************************************ 7:33:54 PM [INFO] YouTube video (https://youtu.be/iU1ZBsru76M) contains a download link for several Dolby Atmos & DTS-X test clips 7:33:54 PM [INFO] compatible for playback via a USB key on your Blu-ray player for testing. 7:33:54 PM [INFO] ************************************************************************************************************************ 7:33:54 PM [INFO] Enjoy your new sound!I saw on a comment in youtube something related, but Audyssey One didn't ask nothingIf Audyssey measures your subwoofer's actual required delay (distance) higher than the 6m speaker spacing limit, it will set all speaker distances in the ady file to 0!!!! The app then sets the subwoofer distance to the maximum allowed and fills up the rest of the speakers accordingly. The only work around that was to ask the user for a distance estimate which is now added in the script.
So, if the script is asking you to manually enter your center speaker distance, it's ONLY because even Audyssey has found that your subwoofer requires a delay larger than the maximum distance limit.
default(1)_OneOptimized.zip