Closed jaydcarlson closed 5 years ago
The NUC980 IoT dev board uses an SPI NAND flash chip, but the SPINAND settings in the run.ini config can't possibly be correct; currently, run.ini says u-boot and uimage both have a start offset of 0x200000.
run.ini
Hi, This issue is fixed. Thanks.
The NUC980 IoT dev board uses an SPI NAND flash chip, but the SPINAND settings in the
run.ini
config can't possibly be correct; currently, run.ini says u-boot and uimage both have a start offset of 0x200000.