Apple M2

[ruchan-ziya]

Can not install on Apple M2...

 ⠼ nginx Pulling                                                           2.3s 
 ⠼ phpmyadmin Pulling                                                      2.3s 
 ⠼ grafana-configurator Pulling                                            2.3s 
 ✘ influxdb Error                                                          2.3s 
 ⠼ mysql Pulling                                                           2.3s 
 ⠼ influx-configurator Pulling                                             2.3s 
 ⠼ grafana Pulling                                                         2.3s 
no matching manifest for linux/arm64/v8 in the manifest list entries

[gecube]

Hi @ruchan-ziya is the issue still actual?

[gecube]

anyway you could just enable x64 emulation on M2

like here https://stackoverflow.com/a/76849228/698689

[ruchan-ziya]

And the installation on M2 still fails.

=> CANCELED [mlflow 2/4] RUN apt-get update -y && apt-get install -y --no-install-recommends build-essential libpq-dev 21.3s => ERROR [influx-configurator 2/4] RUN apt-get update && pip install --upgrade pip && apt-get install -y make automake gcc g++ subv 21.2s

[gecube]

@ruchan-ziya did you enable rosetta as I mentioned before?

[ruchan-ziya]

Yes, I did. So it went past the initial installation, then I guess it failed when the bundled influx tries to update itself using apt-get...

[gecube]

some observations:

InfluxDB runs on M1:

$ docker run --rm influxdb:2.7.5-alpine
2024-09-25T13:25:41.    warn    boltdb not found at configured path, but DOCKER_INFLUXDB_INIT_MODE not specified, skipping setup wrapper    {"system": "docker", "bolt_path": "/var/lib/influxdb2/influxd.bolt"}
2024-09-25T13:25:41.    warn    boltdb not found at configured path, but DOCKER_INFLUXDB_INIT_MODE not specified, skipping setup wrapper    {"system": "docker", "bolt_path": "/var/lib/influxdb2/influxd.bolt"}
ts=2024-09-25T13:25:41.296908Z lvl=info msg="Welcome to InfluxDB" log_id=0rrLa9C0000 version=v2.7.5 commit=09a9607fd9 build_date=2024-01-05T17:17:15Z log_level=info
ts=2024-09-25T13:25:41.296948Z lvl=warn msg="nats-port argument is deprecated and unused" log_id=0rrLa9C0000
ts=2024-09-25T13:25:41.300591Z lvl=info msg="Resources opened" log_id=0rrLa9C0000 service=bolt path=/var/lib/influxdb2/influxd.bolt
ts=2024-09-25T13:25:41.300662Z lvl=info msg="Resources opened" log_id=0rrLa9C0000 service=sqlite path=/var/lib/influxdb2/influxd.sqlite
ts=2024-09-25T13:25:41.301234Z lvl=info msg="Bringing up metadata migrations" log_id=0rrLa9C0000 service="KV migrations" migration_count=20
ts=2024-09-25T13:25:41.332093Z lvl=info msg="Bringing up metadata migrations" log_id=0rrLa9C0000 service="SQL migrations" migration_count=8
ts=2024-09-25T13:25:41.353167Z lvl=info msg="Using data dir" log_id=0rrLa9C0000 service=storage-engine service=store path=/var/lib/influxdb2/engine/data
ts=2024-09-25T13:25:41.353243Z lvl=info msg="Compaction settings" log_id=0rrLa9C0000 service=storage-engine service=store max_concurrent_compactions=4 throughput_bytes_per_second=50331648 throughput_bytes_per_second_burst=50331648
ts=2024-09-25T13:25:41.353251Z lvl=info msg="Open store (start)" log_id=0rrLa9C0000 service=storage-engine service=store op_name=tsdb_open op_event=start
ts=2024-09-25T13:25:41.353302Z lvl=info msg="Open store (end)" log_id=0rrLa9C0000 service=storage-engine service=store op_name=tsdb_open op_event=end op_elapsed=0.051ms
ts=2024-09-25T13:25:41.353330Z lvl=info msg="Starting retention policy enforcement service" log_id=0rrLa9C0000 service=retention check_interval=30m
ts=2024-09-25T13:25:41.353340Z lvl=info msg="Starting precreation service" log_id=0rrLa9C0000 service=shard-precreation check_interval=10m advance_period=30m
ts=2024-09-25T13:25:41.353948Z lvl=info msg="Starting query controller" log_id=0rrLa9C0000 service=storage-reads concurrency_quota=1024 initial_memory_bytes_quota_per_query=9223372036854775807 memory_bytes_quota_per_query=9223372036854775807 max_memory_bytes=0 queue_size=1024
ts=2024-09-25T13:25:41.355159Z lvl=info msg="Configuring InfluxQL statement executor (zeros indicate unlimited)." log_id=0rrLa9C0000 max_select_point=0 max_select_series=0 max_select_buckets=0
ts=2024-09-25T13:25:41.359730Z lvl=info msg=Listening log_id=0rrLa9C0000 service=tcp-listener transport=http addr=:8086 port=8086
ts=2024-09-25T13:25:41.359765Z lvl=info msg=Starting log_id=0rrLa9C0000 service=telemetry interval=8h
^Cts=2024-09-25T13:25:42.539680Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem="HTTP server"
ts=2024-09-25T13:25:42.539699Z lvl=info msg=Stopping log_id=0rrLa9C0000 service=telemetry interval=8h
ts=2024-09-25T13:25:42.539661Z lvl=info msg="Terminating precreation service" log_id=0rrLa9C0000 service=shard-precreation
ts=2024-09-25T13:25:42.539756Z lvl=info msg=Stopping log_id=0rrLa9C0000 service=tcp-listener
ts=2024-09-25T13:25:42.539773Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=scraper
ts=2024-09-25T13:25:42.539787Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=task
ts=2024-09-25T13:25:42.539932Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=query
ts=2024-09-25T13:25:42.540898Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=replications
ts=2024-09-25T13:25:42.540971Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=engine
ts=2024-09-25T13:25:42.540975Z lvl=info msg="Closing retention policy enforcement service" log_id=0rrLa9C0000 service=retention
ts=2024-09-25T13:25:42.540993Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=sqlite
ts=2024-09-25T13:25:42.541427Z lvl=info msg="Stopping subsystem" log_id=0rrLa9C0000 subsystem=bolt

the docker-compose failes when building influxdb configurator image:

$ docker compose up -d
[+] Building 108.8s (6/8)                                                                     docker:desktop-linux
 => [influx-configurator internal] load build definition from Dockerfile                                      0.0s
 => => transferring dockerfile: 410B                                                                          0.0s
 => [influx-configurator internal] load metadata for docker.io/library/python:3.10-slim                       0.7s
 => [influx-configurator internal] load .dockerignore                                                         0.0s
 => => transferring context: 65B                                                                              0.0s
 => CACHED [influx-configurator 1/4] FROM docker.io/library/python:3.10-slim@sha256:80619a5316afae7045a3c133  0.0s
 => [influx-configurator internal] load build context                                                         0.0s
 => => transferring context: 458B                                                                             0.0s
 => ERROR [influx-configurator 2/4] RUN apt-get update  && pip install --upgrade pip  && apt-get install -  108.1s
------                                                                                                             
 > [influx-configurator 2/4] RUN apt-get update  && pip install --upgrade pip  && apt-get install -y make automake gcc g++ subversion python3-dev libblas3 liblapack3 liblapack-dev libblas-dev  && pip install influxdb-client openstef-dbc==3.7.6 pydantic pydantic-settings:                                                                          
0.195 Get:1 http://deb.debian.org/debian bookworm InRelease [151 kB]                                               
0.280 Get:2 http://deb.debian.org/debian bookworm-updates InRelease [55.4 kB]                                      
0.318 Get:3 http://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB]
0.352 Get:4 http://deb.debian.org/debian bookworm/main arm64 Packages [8689 kB]
1.379 Get:5 http://deb.debian.org/debian bookworm-updates/main arm64 Packages [2468 B]
1.405 Get:6 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages [179 kB]
2.165 Fetched 9125 kB in 2s (4444 kB/s)
2.165 Reading package lists...
3.478 Requirement already satisfied: pip in /usr/local/lib/python3.10/site-packages (23.0.1)
3.633 Collecting pip
3.764   Downloading pip-24.2-py3-none-any.whl (1.8 MB)
4.037      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 6.7 MB/s eta 0:00:00
4.066 Installing collected packages: pip
4.066   Attempting uninstall: pip
4.067     Found existing installation: pip 23.0.1
4.132     Uninstalling pip-23.0.1:
4.193       Successfully uninstalled pip-23.0.1
4.678 Successfully installed pip-24.2
4.678 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv
4.863 Reading package lists...
5.271 Building dependency tree...
5.349 Reading state information...
5.460 The following additional packages will be installed:
5.460   autoconf autotools-dev binutils binutils-aarch64-linux-gnu binutils-common
5.460   cpp cpp-12 fontconfig-config fonts-dejavu-core g++-12 gcc-12
5.460   javascript-common libabsl20220623 libaom3 libapr1 libaprutil1 libasan8
5.460   libatomic1 libavif15 libbinutils libbrotli1 libbsd0 libc-dev-bin
5.460   libc-devtools libc6-dev libcc1-0 libcrypt-dev libctf-nobfd0 libctf0
5.460   libdav1d6 libde265-0 libdeflate0 libexpat1 libexpat1-dev libfontconfig1
5.460   libfreetype6 libgav1-1 libgcc-12-dev libgd3 libgdbm-compat4 libgfortran5
5.460   libgomp1 libgprofng0 libheif1 libhwasan0 libisl23 libitm1 libjansson4
5.460   libjbig0 libjpeg62-turbo libjs-jquery libjs-sphinxdoc libjs-underscore
5.460   liblerc4 liblsan0 libmpc3 libmpfr6 libnsl-dev libnuma1 libperl5.36
5.460   libpng16-16 libpython3-dev libpython3-stdlib libpython3.11 libpython3.11-dev
5.460   libpython3.11-minimal libpython3.11-stdlib librav1e0 libsasl2-2
5.460   libsasl2-modules libsasl2-modules-db libserf-1-1 libstdc++-12-dev libsvn1
5.460   libsvtav1enc1 libtiff6 libtirpc-dev libtsan2 libubsan1 libutf8proc2 libwebp7
5.460   libx11-6 libx11-data libx265-199 libxau6 libxcb1 libxdmcp6 libxpm4 libyuv0
5.460   linux-libc-dev m4 manpages manpages-dev media-types perl perl-modules-5.36
5.460   python3 python3-distutils python3-lib2to3 python3-minimal python3.11
5.460   python3.11-dev python3.11-minimal rpcsvc-proto zlib1g-dev
5.461 Suggested packages:
5.461   autoconf-archive gnu-standards autoconf-doc libtool gettext binutils-doc
5.461   cpp-doc gcc-12-locales cpp-12-doc gcc-12-doc gcc-multilib flex bison gdb
5.461   gcc-doc apache2 | lighttpd | httpd liblapack-doc glibc-doc libgd-tools
5.461   sensible-utils libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal
5.461   libsasl2-modules-ldap libsasl2-modules-otp libsasl2-modules-sql
5.461   libstdc++-12-doc m4-doc make-doc man-browser perl-doc
5.461   libterm-readline-gnu-perl | libterm-readline-perl-perl
5.461   libtap-harness-archive-perl python3-doc python3-tk python3-venv
5.461   python3.11-venv python3.11-doc binfmt-support db5.3-util libapache2-mod-svn
5.461   patch subversion-tools
6.314 The following NEW packages will be installed:
6.314   autoconf automake autotools-dev binutils binutils-aarch64-linux-gnu
6.314   binutils-common cpp cpp-12 fontconfig-config fonts-dejavu-core g++ g++-12
6.314   gcc gcc-12 javascript-common libabsl20220623 libaom3 libapr1 libaprutil1
6.314   libasan8 libatomic1 libavif15 libbinutils libblas-dev libblas3 libbrotli1
6.314   libbsd0 libc-dev-bin libc-devtools libc6-dev libcc1-0 libcrypt-dev
6.314   libctf-nobfd0 libctf0 libdav1d6 libde265-0 libdeflate0 libexpat1-dev
6.314   libfontconfig1 libfreetype6 libgav1-1 libgcc-12-dev libgd3 libgdbm-compat4
6.314   libgfortran5 libgomp1 libgprofng0 libheif1 libhwasan0 libisl23 libitm1
6.314   libjansson4 libjbig0 libjpeg62-turbo libjs-jquery libjs-sphinxdoc
6.314   libjs-underscore liblapack-dev liblapack3 liblerc4 liblsan0 libmpc3 libmpfr6
6.314   libnsl-dev libnuma1 libperl5.36 libpng16-16 libpython3-dev libpython3-stdlib
6.314   libpython3.11 libpython3.11-dev libpython3.11-minimal libpython3.11-stdlib
6.314   librav1e0 libsasl2-2 libsasl2-modules libsasl2-modules-db libserf-1-1
6.314   libstdc++-12-dev libsvn1 libsvtav1enc1 libtiff6 libtirpc-dev libtsan2
6.314   libubsan1 libutf8proc2 libwebp7 libx11-6 libx11-data libx265-199 libxau6
6.314   libxcb1 libxdmcp6 libxpm4 libyuv0 linux-libc-dev m4 make manpages
6.314   manpages-dev media-types perl perl-modules-5.36 python3 python3-dev
6.314   python3-distutils python3-lib2to3 python3-minimal python3.11 python3.11-dev
6.314   python3.11-minimal rpcsvc-proto subversion zlib1g-dev
6.314 The following packages will be upgraded:
6.314   libexpat1
6.385 1 upgraded, 114 newly installed, 0 to remove and 0 not upgraded.
6.385 Need to get 100 MB of archives.
6.385 After this operation, 439 MB of additional disk space will be used.
6.385 Get:1 http://deb.debian.org/debian bookworm/main arm64 perl-modules-5.36 all 5.36.0-7+deb12u1 [2815 kB]
6.791 Get:2 http://deb.debian.org/debian bookworm/main arm64 libgdbm-compat4 arm64 1.23-3 [48.0 kB]
6.798 Get:3 http://deb.debian.org/debian bookworm/main arm64 libperl5.36 arm64 5.36.0-7+deb12u1 [4014 kB]
7.278 Get:4 http://deb.debian.org/debian bookworm/main arm64 perl arm64 5.36.0-7+deb12u1 [239 kB]
7.307 Get:5 http://deb.debian.org/debian-security bookworm-security/main arm64 libpython3.11-minimal arm64 3.11.2-6+deb12u3 [808 kB]
7.399 Get:6 http://deb.debian.org/debian-security bookworm-security/main arm64 libexpat1 arm64 2.5.0-1+deb12u1 [84.6 kB]
7.404 Get:7 http://deb.debian.org/debian-security bookworm-security/main arm64 python3.11-minimal arm64 3.11.2-6+deb12u3 [1857 kB]
7.624 Get:8 http://deb.debian.org/debian bookworm/main arm64 python3-minimal arm64 3.11.2-1+b1 [26.3 kB]
7.627 Get:9 http://deb.debian.org/debian bookworm/main arm64 media-types all 10.0.0 [26.1 kB]
7.632 Get:10 http://deb.debian.org/debian-security bookworm-security/main arm64 libpython3.11-stdlib arm64 3.11.2-6+deb12u3 [1747 kB]
7.828 Get:11 http://deb.debian.org/debian-security bookworm-security/main arm64 python3.11 arm64 3.11.2-6+deb12u3 [573 kB]
7.900 Get:12 http://deb.debian.org/debian bookworm/main arm64 libpython3-stdlib arm64 3.11.2-1+b1 [9296 B]
7.901 Get:13 http://deb.debian.org/debian bookworm/main arm64 python3 arm64 3.11.2-1+b1 [26.3 kB]
7.904 Get:14 http://deb.debian.org/debian bookworm/main arm64 manpages all 6.03-2 [1332 kB]
8.061 Get:15 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB]
8.093 Get:16 http://deb.debian.org/debian bookworm/main arm64 autoconf all 2.71-3 [332 kB]
8.127 Get:17 http://deb.debian.org/debian bookworm/main arm64 autotools-dev all 20220109.1 [51.6 kB]
8.137 Get:18 http://deb.debian.org/debian bookworm/main arm64 automake all 1:1.16.5-1.3 [823 kB]
8.241 Get:19 http://deb.debian.org/debian bookworm/main arm64 binutils-common arm64 2.40-2 [2487 kB]
8.563 Get:20 http://deb.debian.org/debian bookworm/main arm64 libbinutils arm64 2.40-2 [645 kB]
8.630 Get:21 http://deb.debian.org/debian bookworm/main arm64 libctf-nobfd0 arm64 2.40-2 [144 kB]
8.644 Get:22 http://deb.debian.org/debian bookworm/main arm64 libctf0 arm64 2.40-2 [79.2 kB]
8.652 Get:23 http://deb.debian.org/debian bookworm/main arm64 libgprofng0 arm64 2.40-2 [680 kB]
8.740 Get:24 http://deb.debian.org/debian bookworm/main arm64 libjansson4 arm64 2.14-2 [40.2 kB]
8.747 Get:25 http://deb.debian.org/debian bookworm/main arm64 binutils-aarch64-linux-gnu arm64 2.40-2 [2637 kB]
9.038 Get:26 http://deb.debian.org/debian bookworm/main arm64 binutils arm64 2.40-2 [64.9 kB]
9.046 Get:27 http://deb.debian.org/debian bookworm/main arm64 libisl23 arm64 0.25-1.1 [610 kB]
9.136 Get:28 http://deb.debian.org/debian bookworm/main arm64 libmpfr6 arm64 4.2.0-1 [600 kB]
9.208 Get:29 http://deb.debian.org/debian bookworm/main arm64 libmpc3 arm64 1.3.1-1 [49.2 kB]
9.212 Get:30 http://deb.debian.org/debian bookworm/main arm64 cpp-12 arm64 12.2.0-14 [8226 kB]
10.15 Get:31 http://deb.debian.org/debian bookworm/main arm64 cpp arm64 4:12.2.0-3 [6832 B]
10.15 Get:32 http://deb.debian.org/debian bookworm/main arm64 fonts-dejavu-core all 2.37-6 [1068 kB]
10.28 Get:33 http://deb.debian.org/debian bookworm/main arm64 fontconfig-config arm64 2.14.1-4 [315 kB]
10.32 Get:34 http://deb.debian.org/debian bookworm/main arm64 libcc1-0 arm64 12.2.0-14 [37.7 kB]
10.32 Get:35 http://deb.debian.org/debian bookworm/main arm64 libgomp1 arm64 12.2.0-14 [104 kB]
10.34 Get:36 http://deb.debian.org/debian bookworm/main arm64 libitm1 arm64 12.2.0-14 [23.9 kB]
10.34 Get:37 http://deb.debian.org/debian bookworm/main arm64 libatomic1 arm64 12.2.0-14 [9536 B]
10.35 Get:38 http://deb.debian.org/debian bookworm/main arm64 libasan8 arm64 12.2.0-14 [2095 kB]
10.58 Get:39 http://deb.debian.org/debian bookworm/main arm64 liblsan0 arm64 12.2.0-14 [926 kB]
10.69 Get:40 http://deb.debian.org/debian bookworm/main arm64 libtsan2 arm64 12.2.0-14 [2179 kB]
10.93 Get:41 http://deb.debian.org/debian bookworm/main arm64 libubsan1 arm64 12.2.0-14 [862 kB]
11.03 Get:42 http://deb.debian.org/debian bookworm/main arm64 libhwasan0 arm64 12.2.0-14 [998 kB]
11.15 Get:43 http://deb.debian.org/debian bookworm/main arm64 libgcc-12-dev arm64 12.2.0-14 [959 kB]
11.30 Get:44 http://deb.debian.org/debian bookworm/main arm64 gcc-12 arm64 12.2.0-14 [16.3 MB]
13.26 Get:45 http://deb.debian.org/debian bookworm/main arm64 gcc arm64 4:12.2.0-3 [5244 B]
13.26 Get:46 http://deb.debian.org/debian bookworm/main arm64 libc-dev-bin arm64 2.36-9+deb12u8 [45.4 kB]
13.26 Get:47 http://deb.debian.org/debian bookworm/main arm64 linux-libc-dev arm64 6.1.106-3 [2003 kB]
13.48 Get:48 http://deb.debian.org/debian bookworm/main arm64 libcrypt-dev arm64 1:4.4.33-2 [121 kB]
13.49 Get:49 http://deb.debian.org/debian bookworm/main arm64 libtirpc-dev arm64 1.3.3+ds-1 [194 kB]
13.52 Get:50 http://deb.debian.org/debian bookworm/main arm64 libnsl-dev arm64 1.3.0-2 [66.1 kB]
13.53 Get:51 http://deb.debian.org/debian bookworm/main arm64 rpcsvc-proto arm64 1.4.3-1 [59.7 kB]
13.53 Get:52 http://deb.debian.org/debian bookworm/main arm64 libc6-dev arm64 2.36-9+deb12u8 [1430 kB]
13.73 Get:53 http://deb.debian.org/debian bookworm/main arm64 libstdc++-12-dev arm64 12.2.0-14 [2006 kB]
13.98 Get:54 http://deb.debian.org/debian bookworm/main arm64 g++-12 arm64 12.2.0-14 [9071 kB]
15.05 Get:55 http://deb.debian.org/debian bookworm/main arm64 g++ arm64 4:12.2.0-3 [1336 B]
15.05 Get:56 http://deb.debian.org/debian bookworm/main arm64 javascript-common all 11+nmu1 [6260 B]
15.05 Get:57 http://deb.debian.org/debian bookworm/main arm64 libabsl20220623 arm64 20220623.1-1 [363 kB]
15.09 Get:58 http://deb.debian.org/debian bookworm/main arm64 libaom3 arm64 3.6.0-1+deb12u1 [1379 kB]
15.27 Get:59 http://deb.debian.org/debian bookworm/main arm64 libapr1 arm64 1.7.2-3 [94.1 kB]
15.28 Get:60 http://deb.debian.org/debian bookworm/main arm64 libaprutil1 arm64 1.6.3-1 [84.4 kB]
15.28 Get:61 http://deb.debian.org/debian bookworm/main arm64 libdav1d6 arm64 1.0.0-2+deb12u1 [275 kB]
15.31 Get:62 http://deb.debian.org/debian bookworm/main arm64 libgav1-1 arm64 0.18.0-1+b1 [425 kB]
15.36 Get:63 http://deb.debian.org/debian bookworm/main arm64 librav1e0 arm64 0.5.1-6 [552 kB]
15.46 Get:64 http://deb.debian.org/debian bookworm/main arm64 libsvtav1enc1 arm64 1.4.1+dfsg-1 [1074 kB]
15.58 Get:65 http://deb.debian.org/debian bookworm/main arm64 libjpeg62-turbo arm64 1:2.1.5-2 [171 kB]
15.60 Get:66 http://deb.debian.org/debian bookworm/main arm64 libyuv0 arm64 0.0~git20230123.b2528b0-1 [122 kB]
15.61 Get:67 http://deb.debian.org/debian bookworm/main arm64 libavif15 arm64 0.11.1-1 [88.3 kB]
15.62 Get:68 http://deb.debian.org/debian bookworm/main arm64 libblas3 arm64 3.11.0-2 [91.4 kB]
15.64 Get:69 http://deb.debian.org/debian bookworm/main arm64 libblas-dev arm64 3.11.0-2 [97.6 kB]
15.65 Get:70 http://deb.debian.org/debian bookworm/main arm64 libbrotli1 arm64 1.0.9-2+b6 [269 kB]
15.68 Get:71 http://deb.debian.org/debian bookworm/main arm64 libbsd0 arm64 0.11.7-2 [115 kB]
15.69 Get:72 http://deb.debian.org/debian bookworm/main arm64 libpng16-16 arm64 1.6.39-2 [269 kB]
15.73 Get:73 http://deb.debian.org/debian bookworm/main arm64 libfreetype6 arm64 2.12.1+dfsg-5+deb12u3 [368 kB]
15.78 Get:74 http://deb.debian.org/debian bookworm/main arm64 libfontconfig1 arm64 2.14.1-4 [381 kB]
15.82 Get:75 http://deb.debian.org/debian bookworm/main arm64 libde265-0 arm64 1.0.11-1+deb12u2 [148 kB]
15.83 Get:76 http://deb.debian.org/debian bookworm/main arm64 libnuma1 arm64 2.0.16-1 [20.3 kB]
15.84 Get:77 http://deb.debian.org/debian bookworm/main arm64 libx265-199 arm64 3.5-2+b1 [603 kB]
15.91 Get:78 http://deb.debian.org/debian bookworm/main arm64 libheif1 arm64 1.15.1-1 [191 kB]
15.93 Get:79 http://deb.debian.org/debian bookworm/main arm64 libdeflate0 arm64 1.14-1 [54.3 kB]
15.94 Get:80 http://deb.debian.org/debian bookworm/main arm64 libjbig0 arm64 2.1-6.1 [30.0 kB]
15.95 Get:81 http://deb.debian.org/debian bookworm/main arm64 liblerc4 arm64 4.0.0+ds-2 [138 kB]
15.96 Get:82 http://deb.debian.org/debian bookworm/main arm64 libwebp7 arm64 1.2.4-0.2+deb12u1 [260 kB]
16.00 Get:83 http://deb.debian.org/debian bookworm/main arm64 libtiff6 arm64 4.5.0-6+deb12u1 [301 kB]
16.07 Get:84 http://deb.debian.org/debian bookworm/main arm64 libxau6 arm64 1:1.0.9-1 [19.7 kB]
16.08 Get:85 http://deb.debian.org/debian bookworm/main arm64 libxdmcp6 arm64 1:1.1.2-3 [25.4 kB]
16.08 Get:86 http://deb.debian.org/debian bookworm/main arm64 libxcb1 arm64 1.15-1 [143 kB]
16.11 Get:87 http://deb.debian.org/debian bookworm/main arm64 libx11-data all 2:1.8.4-2+deb12u2 [292 kB]
16.15 Get:88 http://deb.debian.org/debian bookworm/main arm64 libx11-6 arm64 2:1.8.4-2+deb12u2 [735 kB]
16.24 Get:89 http://deb.debian.org/debian bookworm/main arm64 libxpm4 arm64 1:3.5.12-1.1+deb12u1 [45.4 kB]
16.24 Get:90 http://deb.debian.org/debian bookworm/main arm64 libgd3 arm64 2.3.3-9 [113 kB]
16.26 Get:91 http://deb.debian.org/debian bookworm/main arm64 libc-devtools arm64 2.36-9+deb12u8 [52.6 kB]
16.26 Get:92 http://deb.debian.org/debian-security bookworm-security/main arm64 libexpat1-dev arm64 2.5.0-1+deb12u1 [134 kB]
16.28 Get:93 http://deb.debian.org/debian bookworm/main arm64 libgfortran5 arm64 12.2.0-14 [340 kB]
16.33 Get:94 http://deb.debian.org/debian bookworm/main arm64 libjs-jquery all 3.6.1+dfsg+~3.5.14-1 [326 kB]
16.36 Get:95 http://deb.debian.org/debian bookworm/main arm64 libjs-underscore all 1.13.4~dfsg+~1.11.4-3 [116 kB]
16.38 Get:96 http://deb.debian.org/debian bookworm/main arm64 libjs-sphinxdoc all 5.3.0-4 [130 kB]
16.39 Get:97 http://deb.debian.org/debian bookworm/main arm64 liblapack3 arm64 3.11.0-2 [1664 kB]
16.61 Get:98 http://deb.debian.org/debian bookworm/main arm64 liblapack-dev arm64 3.11.0-2 [3065 kB]
17.04 Get:99 http://deb.debian.org/debian-security bookworm-security/main arm64 libpython3.11 arm64 3.11.2-6+deb12u3 [1840 kB]
17.27 Get:100 http://deb.debian.org/debian bookworm/main arm64 zlib1g-dev arm64 1:1.2.13.dfsg-1 [913 kB]
17.39 Get:101 http://deb.debian.org/debian-security bookworm-security/main arm64 libpython3.11-dev arm64 3.11.2-6+deb12u3 [4387 kB]
17.91 Get:102 http://deb.debian.org/debian bookworm/main arm64 libpython3-dev arm64 3.11.2-1+b1 [9564 B]
17.91 Get:103 http://deb.debian.org/debian bookworm/main arm64 libsasl2-modules-db arm64 2.1.28+dfsg-10 [20.8 kB]
17.92 Get:104 http://deb.debian.org/debian bookworm/main arm64 libsasl2-2 arm64 2.1.28+dfsg-10 [58.0 kB]
17.92 Get:105 http://deb.debian.org/debian bookworm/main arm64 libsasl2-modules arm64 2.1.28+dfsg-10 [63.1 kB]
17.93 Get:106 http://deb.debian.org/debian bookworm/main arm64 libserf-1-1 arm64 1.3.9-11 [52.5 kB]
17.93 Get:107 http://deb.debian.org/debian bookworm/main arm64 libutf8proc2 arm64 2.8.0-1 [60.6 kB]
17.94 Get:108 http://deb.debian.org/debian bookworm/main arm64 libsvn1 arm64 1.14.2-4+b2 [1283 kB]
18.08 Get:109 http://deb.debian.org/debian bookworm/main arm64 make arm64 4.3-4.1 [391 kB]
18.15 Get:110 http://deb.debian.org/debian bookworm/main arm64 manpages-dev all 6.03-2 [2030 kB]
18.37 Get:111 http://deb.debian.org/debian-security bookworm-security/main arm64 python3.11-dev arm64 3.11.2-6+deb12u3 [616 kB]
18.46 Get:112 http://deb.debian.org/debian bookworm/main arm64 python3-lib2to3 all 3.11.2-3 [76.3 kB]
18.46 Get:113 http://deb.debian.org/debian bookworm/main arm64 python3-distutils all 3.11.2-3 [131 kB]
18.48 Get:114 http://deb.debian.org/debian bookworm/main arm64 python3-dev arm64 3.11.2-1+b1 [26.2 kB]
18.49 Get:115 http://deb.debian.org/debian bookworm/main arm64 subversion arm64 1.14.2-4+b2 [940 kB]
18.68 debconf: delaying package configuration, since apt-utils is not installed
18.70 Fetched 100 MB in 12s (8176 kB/s)
18.71 Selecting previously unselected package perl-modules-5.36.
(Reading database ... 6689 files and directories currently installed.)
18.71 Preparing to unpack .../0-perl-modules-5.36_5.36.0-7+deb12u1_all.deb ...
18.72 Unpacking perl-modules-5.36 (5.36.0-7+deb12u1) ...
18.91 Selecting previously unselected package libgdbm-compat4:arm64.
18.91 Preparing to unpack .../1-libgdbm-compat4_1.23-3_arm64.deb ...
18.91 Unpacking libgdbm-compat4:arm64 (1.23-3) ...
18.93 Selecting previously unselected package libperl5.36:arm64.
18.93 Preparing to unpack .../2-libperl5.36_5.36.0-7+deb12u1_arm64.deb ...
18.93 Unpacking libperl5.36:arm64 (5.36.0-7+deb12u1) ...
19.17 Selecting previously unselected package perl.
19.17 Preparing to unpack .../3-perl_5.36.0-7+deb12u1_arm64.deb ...
19.17 Unpacking perl (5.36.0-7+deb12u1) ...
19.20 Selecting previously unselected package libpython3.11-minimal:arm64.
19.20 Preparing to unpack .../4-libpython3.11-minimal_3.11.2-6+deb12u3_arm64.deb ...
19.20 Unpacking libpython3.11-minimal:arm64 (3.11.2-6+deb12u3) ...
19.26 Preparing to unpack .../5-libexpat1_2.5.0-1+deb12u1_arm64.deb ...
19.26 Unpacking libexpat1:arm64 (2.5.0-1+deb12u1) over (2.5.0-1) ...
19.28 Selecting previously unselected package python3.11-minimal.
19.29 Preparing to unpack .../6-python3.11-minimal_3.11.2-6+deb12u3_arm64.deb ...
19.29 Unpacking python3.11-minimal (3.11.2-6+deb12u3) ...
19.40 Setting up libpython3.11-minimal:arm64 (3.11.2-6+deb12u3) ...
19.41 Setting up libexpat1:arm64 (2.5.0-1+deb12u1) ...
19.41 Setting up python3.11-minimal (3.11.2-6+deb12u3) ...
19.79 Selecting previously unselected package python3-minimal.
(Reading database ... 9002 files and directories currently installed.)
19.79 Preparing to unpack .../python3-minimal_3.11.2-1+b1_arm64.deb ...
19.79 Unpacking python3-minimal (3.11.2-1+b1) ...
19.80 Selecting previously unselected package media-types.
19.81 Preparing to unpack .../media-types_10.0.0_all.deb ...
19.81 Unpacking media-types (10.0.0) ...
19.82 Selecting previously unselected package libpython3.11-stdlib:arm64.
19.82 Preparing to unpack .../libpython3.11-stdlib_3.11.2-6+deb12u3_arm64.deb ...
19.82 Unpacking libpython3.11-stdlib:arm64 (3.11.2-6+deb12u3) ...
19.93 Selecting previously unselected package python3.11.
19.93 Preparing to unpack .../python3.11_3.11.2-6+deb12u3_arm64.deb ...
19.93 Unpacking python3.11 (3.11.2-6+deb12u3) ...
19.95 Selecting previously unselected package libpython3-stdlib:arm64.
19.95 Preparing to unpack .../libpython3-stdlib_3.11.2-1+b1_arm64.deb ...
19.95 Unpacking libpython3-stdlib:arm64 (3.11.2-1+b1) ...
19.96 Setting up python3-minimal (3.11.2-1+b1) ...
20.04 Selecting previously unselected package python3.
(Reading database ... 9412 files and directories currently installed.)
20.04 Preparing to unpack .../000-python3_3.11.2-1+b1_arm64.deb ...
20.05 Unpacking python3 (3.11.2-1+b1) ...
20.06 Selecting previously unselected package manpages.
20.06 Preparing to unpack .../001-manpages_6.03-2_all.deb ...
20.06 Unpacking manpages (6.03-2) ...
20.12 Selecting previously unselected package m4.
20.12 Preparing to unpack .../002-m4_1.4.19-3_arm64.deb ...
20.12 Unpacking m4 (1.4.19-3) ...
20.15 Selecting previously unselected package autoconf.
20.15 Preparing to unpack .../003-autoconf_2.71-3_all.deb ...
20.15 Unpacking autoconf (2.71-3) ...
20.18 Selecting previously unselected package autotools-dev.
20.18 Preparing to unpack .../004-autotools-dev_20220109.1_all.deb ...
20.18 Unpacking autotools-dev (20220109.1) ...
20.19 Selecting previously unselected package automake.
20.19 Preparing to unpack .../005-automake_1%3a1.16.5-1.3_all.deb ...
20.20 Unpacking automake (1:1.16.5-1.3) ...
20.24 Selecting previously unselected package binutils-common:arm64.
20.24 Preparing to unpack .../006-binutils-common_2.40-2_arm64.deb ...
20.24 Unpacking binutils-common:arm64 (2.40-2) ...
20.39 Selecting previously unselected package libbinutils:arm64.
20.39 Preparing to unpack .../007-libbinutils_2.40-2_arm64.deb ...
20.40 Unpacking libbinutils:arm64 (2.40-2) ...
20.44 Selecting previously unselected package libctf-nobfd0:arm64.
20.44 Preparing to unpack .../008-libctf-nobfd0_2.40-2_arm64.deb ...
20.44 Unpacking libctf-nobfd0:arm64 (2.40-2) ...
20.46 Selecting previously unselected package libctf0:arm64.
20.46 Preparing to unpack .../009-libctf0_2.40-2_arm64.deb ...
20.47 Unpacking libctf0:arm64 (2.40-2) ...
20.48 Selecting previously unselected package libgprofng0:arm64.
20.48 Preparing to unpack .../010-libgprofng0_2.40-2_arm64.deb ...
20.48 Unpacking libgprofng0:arm64 (2.40-2) ...
20.53 Selecting previously unselected package libjansson4:arm64.
20.53 Preparing to unpack .../011-libjansson4_2.14-2_arm64.deb ...
20.53 Unpacking libjansson4:arm64 (2.14-2) ...
20.55 Selecting previously unselected package binutils-aarch64-linux-gnu.
20.55 Preparing to unpack .../012-binutils-aarch64-linux-gnu_2.40-2_arm64.deb ...
20.55 Unpacking binutils-aarch64-linux-gnu (2.40-2) ...
20.73 Selecting previously unselected package binutils.
20.73 Preparing to unpack .../013-binutils_2.40-2_arm64.deb ...
20.73 Unpacking binutils (2.40-2) ...
20.74 Selecting previously unselected package libisl23:arm64.
20.75 Preparing to unpack .../014-libisl23_0.25-1.1_arm64.deb ...
20.75 Unpacking libisl23:arm64 (0.25-1.1) ...
20.79 Selecting previously unselected package libmpfr6:arm64.
20.79 Preparing to unpack .../015-libmpfr6_4.2.0-1_arm64.deb ...
20.79 Unpacking libmpfr6:arm64 (4.2.0-1) ...
20.82 Selecting previously unselected package libmpc3:arm64.
20.82 Preparing to unpack .../016-libmpc3_1.3.1-1_arm64.deb ...
20.82 Unpacking libmpc3:arm64 (1.3.1-1) ...
20.83 Selecting previously unselected package cpp-12.
20.83 Preparing to unpack .../017-cpp-12_12.2.0-14_arm64.deb ...
20.84 Unpacking cpp-12 (12.2.0-14) ...
21.24 Selecting previously unselected package cpp.
21.24 Preparing to unpack .../018-cpp_4%3a12.2.0-3_arm64.deb ...
21.24 Unpacking cpp (4:12.2.0-3) ...
21.25 Selecting previously unselected package fonts-dejavu-core.
21.25 Preparing to unpack .../019-fonts-dejavu-core_2.37-6_all.deb ...
21.25 Unpacking fonts-dejavu-core (2.37-6) ...
21.33 Selecting previously unselected package fontconfig-config.
21.33 Preparing to unpack .../020-fontconfig-config_2.14.1-4_arm64.deb ...
21.38 Unpacking fontconfig-config (2.14.1-4) ...
21.40 Selecting previously unselected package libcc1-0:arm64.
21.40 Preparing to unpack .../021-libcc1-0_12.2.0-14_arm64.deb ...
21.40 Unpacking libcc1-0:arm64 (12.2.0-14) ...
21.42 Selecting previously unselected package libgomp1:arm64.
21.42 Preparing to unpack .../022-libgomp1_12.2.0-14_arm64.deb ...
21.42 Unpacking libgomp1:arm64 (12.2.0-14) ...
21.44 Selecting previously unselected package libitm1:arm64.
21.44 Preparing to unpack .../023-libitm1_12.2.0-14_arm64.deb ...
21.44 Unpacking libitm1:arm64 (12.2.0-14) ...
21.45 Selecting previously unselected package libatomic1:arm64.
21.45 Preparing to unpack .../024-libatomic1_12.2.0-14_arm64.deb ...
21.45 Unpacking libatomic1:arm64 (12.2.0-14) ...
21.46 Selecting previously unselected package libasan8:arm64.
21.46 Preparing to unpack .../025-libasan8_12.2.0-14_arm64.deb ...
21.46 Unpacking libasan8:arm64 (12.2.0-14) ...
21.59 Selecting previously unselected package liblsan0:arm64.
21.59 Preparing to unpack .../026-liblsan0_12.2.0-14_arm64.deb ...
21.59 Unpacking liblsan0:arm64 (12.2.0-14) ...
21.66 Selecting previously unselected package libtsan2:arm64.
21.66 Preparing to unpack .../027-libtsan2_12.2.0-14_arm64.deb ...
21.66 Unpacking libtsan2:arm64 (12.2.0-14) ...
21.80 Selecting previously unselected package libubsan1:arm64.
21.80 Preparing to unpack .../028-libubsan1_12.2.0-14_arm64.deb ...
21.80 Unpacking libubsan1:arm64 (12.2.0-14) ...
21.86 Selecting previously unselected package libhwasan0:arm64.
21.86 Preparing to unpack .../029-libhwasan0_12.2.0-14_arm64.deb ...
21.87 Unpacking libhwasan0:arm64 (12.2.0-14) ...
21.93 Selecting previously unselected package libgcc-12-dev:arm64.
21.93 Preparing to unpack .../030-libgcc-12-dev_12.2.0-14_arm64.deb ...
21.93 Unpacking libgcc-12-dev:arm64 (12.2.0-14) ...
22.01 Selecting previously unselected package gcc-12.
22.01 Preparing to unpack .../031-gcc-12_12.2.0-14_arm64.deb ...
22.01 Unpacking gcc-12 (12.2.0-14) ...
22.49 Selecting previously unselected package gcc.
22.49 Preparing to unpack .../032-gcc_4%3a12.2.0-3_arm64.deb ...
22.49 Unpacking gcc (4:12.2.0-3) ...
22.50 Selecting previously unselected package libc-dev-bin.
22.50 Preparing to unpack .../033-libc-dev-bin_2.36-9+deb12u8_arm64.deb ...
22.50 Unpacking libc-dev-bin (2.36-9+deb12u8) ...
22.52 Selecting previously unselected package linux-libc-dev:arm64.
22.52 Preparing to unpack .../034-linux-libc-dev_6.1.106-3_arm64.deb ...
22.52 Unpacking linux-libc-dev:arm64 (6.1.106-3) ...
22.60 Selecting previously unselected package libcrypt-dev:arm64.
22.60 Preparing to unpack .../035-libcrypt-dev_1%3a4.4.33-2_arm64.deb ...
22.60 Unpacking libcrypt-dev:arm64 (1:4.4.33-2) ...
22.62 Selecting previously unselected package libtirpc-dev:arm64.
22.62 Preparing to unpack .../036-libtirpc-dev_1.3.3+ds-1_arm64.deb ...
22.62 Unpacking libtirpc-dev:arm64 (1.3.3+ds-1) ...
22.64 Selecting previously unselected package libnsl-dev:arm64.
22.64 Preparing to unpack .../037-libnsl-dev_1.3.0-2_arm64.deb ...
22.64 Unpacking libnsl-dev:arm64 (1.3.0-2) ...
22.66 Selecting previously unselected package rpcsvc-proto.
22.66 Preparing to unpack .../038-rpcsvc-proto_1.4.3-1_arm64.deb ...
22.66 Unpacking rpcsvc-proto (1.4.3-1) ...
22.67 Selecting previously unselected package libc6-dev:arm64.
22.67 Preparing to unpack .../039-libc6-dev_2.36-9+deb12u8_arm64.deb ...
22.67 Unpacking libc6-dev:arm64 (2.36-9+deb12u8) ...
22.77 Selecting previously unselected package libstdc++-12-dev:arm64.
22.77 Preparing to unpack .../040-libstdc++-12-dev_12.2.0-14_arm64.deb ...
22.77 Unpacking libstdc++-12-dev:arm64 (12.2.0-14) ...
22.91 Selecting previously unselected package g++-12.
22.91 Preparing to unpack .../041-g++-12_12.2.0-14_arm64.deb ...
22.91 Unpacking g++-12 (12.2.0-14) ...
23.34 Selecting previously unselected package g++.
23.34 Preparing to unpack .../042-g++_4%3a12.2.0-3_arm64.deb ...
23.34 Unpacking g++ (4:12.2.0-3) ...
23.35 Selecting previously unselected package javascript-common.
23.35 Preparing to unpack .../043-javascript-common_11+nmu1_all.deb ...
23.35 Unpacking javascript-common (11+nmu1) ...
23.37 Selecting previously unselected package libabsl20220623:arm64.
23.37 Preparing to unpack .../044-libabsl20220623_20220623.1-1_arm64.deb ...
23.37 Unpacking libabsl20220623:arm64 (20220623.1-1) ...
23.41 Selecting previously unselected package libaom3:arm64.
23.41 Preparing to unpack .../045-libaom3_3.6.0-1+deb12u1_arm64.deb ...
23.41 Unpacking libaom3:arm64 (3.6.0-1+deb12u1) ...
23.50 Selecting previously unselected package libapr1:arm64.
23.50 Preparing to unpack .../046-libapr1_1.7.2-3_arm64.deb ...
23.50 Unpacking libapr1:arm64 (1.7.2-3) ...
23.52 Selecting previously unselected package libaprutil1:arm64.
23.52 Preparing to unpack .../047-libaprutil1_1.6.3-1_arm64.deb ...
23.52 Unpacking libaprutil1:arm64 (1.6.3-1) ...
23.53 Selecting previously unselected package libdav1d6:arm64.
23.53 Preparing to unpack .../048-libdav1d6_1.0.0-2+deb12u1_arm64.deb ...
23.54 Unpacking libdav1d6:arm64 (1.0.0-2+deb12u1) ...
23.56 Selecting previously unselected package libgav1-1:arm64.
23.56 Preparing to unpack .../049-libgav1-1_0.18.0-1+b1_arm64.deb ...
23.57 Unpacking libgav1-1:arm64 (0.18.0-1+b1) ...
23.60 Selecting previously unselected package librav1e0:arm64.
23.60 Preparing to unpack .../050-librav1e0_0.5.1-6_arm64.deb ...
23.60 Unpacking librav1e0:arm64 (0.5.1-6) ...
23.64 Selecting previously unselected package libsvtav1enc1:arm64.
23.64 Preparing to unpack .../051-libsvtav1enc1_1.4.1+dfsg-1_arm64.deb ...
23.65 Unpacking libsvtav1enc1:arm64 (1.4.1+dfsg-1) ...
23.71 Selecting previously unselected package libjpeg62-turbo:arm64.
23.72 Preparing to unpack .../052-libjpeg62-turbo_1%3a2.1.5-2_arm64.deb ...
23.72 Unpacking libjpeg62-turbo:arm64 (1:2.1.5-2) ...
23.74 Selecting previously unselected package libyuv0:arm64.
23.74 Preparing to unpack .../053-libyuv0_0.0~git20230123.b2528b0-1_arm64.deb ...
23.74 Unpacking libyuv0:arm64 (0.0~git20230123.b2528b0-1) ...
23.76 Selecting previously unselected package libavif15:arm64.
23.76 Preparing to unpack .../054-libavif15_0.11.1-1_arm64.deb ...
23.76 Unpacking libavif15:arm64 (0.11.1-1) ...
23.78 Selecting previously unselected package libblas3:arm64.
23.78 Preparing to unpack .../055-libblas3_3.11.0-2_arm64.deb ...
23.78 Unpacking libblas3:arm64 (3.11.0-2) ...
23.79 Selecting previously unselected package libblas-dev:arm64.
23.80 Preparing to unpack .../056-libblas-dev_3.11.0-2_arm64.deb ...
23.80 Unpacking libblas-dev:arm64 (3.11.0-2) ...
23.81 Selecting previously unselected package libbrotli1:arm64.
23.81 Preparing to unpack .../057-libbrotli1_1.0.9-2+b6_arm64.deb ...
23.82 Unpacking libbrotli1:arm64 (1.0.9-2+b6) ...
23.84 Selecting previously unselected package libbsd0:arm64.
23.84 Preparing to unpack .../058-libbsd0_0.11.7-2_arm64.deb ...
23.84 Unpacking libbsd0:arm64 (0.11.7-2) ...
23.86 Selecting previously unselected package libpng16-16:arm64.
23.86 Preparing to unpack .../059-libpng16-16_1.6.39-2_arm64.deb ...
23.86 Unpacking libpng16-16:arm64 (1.6.39-2) ...
23.89 Selecting previously unselected package libfreetype6:arm64.
23.89 Preparing to unpack .../060-libfreetype6_2.12.1+dfsg-5+deb12u3_arm64.deb ...
23.89 Unpacking libfreetype6:arm64 (2.12.1+dfsg-5+deb12u3) ...
23.92 Selecting previously unselected package libfontconfig1:arm64.
23.92 Preparing to unpack .../061-libfontconfig1_2.14.1-4_arm64.deb ...
23.92 Unpacking libfontconfig1:arm64 (2.14.1-4) ...
23.94 Selecting previously unselected package libde265-0:arm64.
23.94 Preparing to unpack .../062-libde265-0_1.0.11-1+deb12u2_arm64.deb ...
23.94 Unpacking libde265-0:arm64 (1.0.11-1+deb12u2) ...
23.96 Selecting previously unselected package libnuma1:arm64.
23.96 Preparing to unpack .../063-libnuma1_2.0.16-1_arm64.deb ...
23.96 Unpacking libnuma1:arm64 (2.0.16-1) ...
23.98 Selecting previously unselected package libx265-199:arm64.
23.98 Preparing to unpack .../064-libx265-199_3.5-2+b1_arm64.deb ...
23.98 Unpacking libx265-199:arm64 (3.5-2+b1) ...
24.02 Selecting previously unselected package libheif1:arm64.
24.02 Preparing to unpack .../065-libheif1_1.15.1-1_arm64.deb ...
24.03 Unpacking libheif1:arm64 (1.15.1-1) ...
24.05 Selecting previously unselected package libdeflate0:arm64.
24.05 Preparing to unpack .../066-libdeflate0_1.14-1_arm64.deb ...
24.05 Unpacking libdeflate0:arm64 (1.14-1) ...
24.07 Selecting previously unselected package libjbig0:arm64.
24.07 Preparing to unpack .../067-libjbig0_2.1-6.1_arm64.deb ...
24.07 Unpacking libjbig0:arm64 (2.1-6.1) ...
24.08 Selecting previously unselected package liblerc4:arm64.
24.08 Preparing to unpack .../068-liblerc4_4.0.0+ds-2_arm64.deb ...
24.09 Unpacking liblerc4:arm64 (4.0.0+ds-2) ...
24.10 Selecting previously unselected package libwebp7:arm64.
24.10 Preparing to unpack .../069-libwebp7_1.2.4-0.2+deb12u1_arm64.deb ...
24.11 Unpacking libwebp7:arm64 (1.2.4-0.2+deb12u1) ...
24.13 Selecting previously unselected package libtiff6:arm64.
24.13 Preparing to unpack .../070-libtiff6_4.5.0-6+deb12u1_arm64.deb ...
24.13 Unpacking libtiff6:arm64 (4.5.0-6+deb12u1) ...
24.15 Selecting previously unselected package libxau6:arm64.
24.15 Preparing to unpack .../071-libxau6_1%3a1.0.9-1_arm64.deb ...
24.16 Unpacking libxau6:arm64 (1:1.0.9-1) ...
24.17 Selecting previously unselected package libxdmcp6:arm64.
24.17 Preparing to unpack .../072-libxdmcp6_1%3a1.1.2-3_arm64.deb ...
24.17 Unpacking libxdmcp6:arm64 (1:1.1.2-3) ...
24.18 Selecting previously unselected package libxcb1:arm64.
24.18 Preparing to unpack .../073-libxcb1_1.15-1_arm64.deb ...
24.18 Unpacking libxcb1:arm64 (1.15-1) ...
24.20 Selecting previously unselected package libx11-data.
24.20 Preparing to unpack .../074-libx11-data_2%3a1.8.4-2+deb12u2_all.deb ...
24.20 Unpacking libx11-data (2:1.8.4-2+deb12u2) ...
24.23 Selecting previously unselected package libx11-6:arm64.
24.23 Preparing to unpack .../075-libx11-6_2%3a1.8.4-2+deb12u2_arm64.deb ...
24.23 Unpacking libx11-6:arm64 (2:1.8.4-2+deb12u2) ...
24.28 Selecting previously unselected package libxpm4:arm64.
24.28 Preparing to unpack .../076-libxpm4_1%3a3.5.12-1.1+deb12u1_arm64.deb ...
24.28 Unpacking libxpm4:arm64 (1:3.5.12-1.1+deb12u1) ...
24.29 Selecting previously unselected package libgd3:arm64.
24.29 Preparing to unpack .../077-libgd3_2.3.3-9_arm64.deb ...
24.29 Unpacking libgd3:arm64 (2.3.3-9) ...
24.31 Selecting previously unselected package libc-devtools.
24.31 Preparing to unpack .../078-libc-devtools_2.36-9+deb12u8_arm64.deb ...
24.31 Unpacking libc-devtools (2.36-9+deb12u8) ...
24.32 Selecting previously unselected package libexpat1-dev:arm64.
24.33 Preparing to unpack .../079-libexpat1-dev_2.5.0-1+deb12u1_arm64.deb ...
24.33 Unpacking libexpat1-dev:arm64 (2.5.0-1+deb12u1) ...
24.35 Selecting previously unselected package libgfortran5:arm64.
24.35 Preparing to unpack .../080-libgfortran5_12.2.0-14_arm64.deb ...
24.35 Unpacking libgfortran5:arm64 (12.2.0-14) ...
24.38 Selecting previously unselected package libjs-jquery.
24.38 Preparing to unpack .../081-libjs-jquery_3.6.1+dfsg+~3.5.14-1_all.deb ...
24.38 Unpacking libjs-jquery (3.6.1+dfsg+~3.5.14-1) ...
24.41 Selecting previously unselected package libjs-underscore.
24.41 Preparing to unpack .../082-libjs-underscore_1.13.4~dfsg+~1.11.4-3_all.deb ...
24.41 Unpacking libjs-underscore (1.13.4~dfsg+~1.11.4-3) ...
24.42 Selecting previously unselected package libjs-sphinxdoc.
24.43 Preparing to unpack .../083-libjs-sphinxdoc_5.3.0-4_all.deb ...
24.43 Unpacking libjs-sphinxdoc (5.3.0-4) ...
24.45 Selecting previously unselected package liblapack3:arm64.
24.45 Preparing to unpack .../084-liblapack3_3.11.0-2_arm64.deb ...
24.46 Unpacking liblapack3:arm64 (3.11.0-2) ...
24.56 Selecting previously unselected package liblapack-dev:arm64.
24.56 Preparing to unpack .../085-liblapack-dev_3.11.0-2_arm64.deb ...
24.56 Unpacking liblapack-dev:arm64 (3.11.0-2) ...
24.75 Selecting previously unselected package libpython3.11:arm64.
24.75 Preparing to unpack .../086-libpython3.11_3.11.2-6+deb12u3_arm64.deb ...
24.75 Unpacking libpython3.11:arm64 (3.11.2-6+deb12u3) ...
24.87 Selecting previously unselected package zlib1g-dev:arm64.
24.87 Preparing to unpack .../087-zlib1g-dev_1%3a1.2.13.dfsg-1_arm64.deb ...
24.87 Unpacking zlib1g-dev:arm64 (1:1.2.13.dfsg-1) ...
24.91 Selecting previously unselected package libpython3.11-dev:arm64.
24.91 Preparing to unpack .../088-libpython3.11-dev_3.11.2-6+deb12u3_arm64.deb ...
24.91 Unpacking libpython3.11-dev:arm64 (3.11.2-6+deb12u3) ...
25.17 Selecting previously unselected package libpython3-dev:arm64.
25.18 Preparing to unpack .../089-libpython3-dev_3.11.2-1+b1_arm64.deb ...
25.18 Unpacking libpython3-dev:arm64 (3.11.2-1+b1) ...
25.19 Selecting previously unselected package libsasl2-modules-db:arm64.
25.19 Preparing to unpack .../090-libsasl2-modules-db_2.1.28+dfsg-10_arm64.deb ...
25.19 Unpacking libsasl2-modules-db:arm64 (2.1.28+dfsg-10) ...
25.20 Selecting previously unselected package libsasl2-2:arm64.
25.21 Preparing to unpack .../091-libsasl2-2_2.1.28+dfsg-10_arm64.deb ...
25.21 Unpacking libsasl2-2:arm64 (2.1.28+dfsg-10) ...
25.22 Selecting previously unselected package libsasl2-modules:arm64.
25.22 Preparing to unpack .../092-libsasl2-modules_2.1.28+dfsg-10_arm64.deb ...
25.23 Unpacking libsasl2-modules:arm64 (2.1.28+dfsg-10) ...
25.24 Selecting previously unselected package libserf-1-1:arm64.
25.24 Preparing to unpack .../093-libserf-1-1_1.3.9-11_arm64.deb ...
25.24 Unpacking libserf-1-1:arm64 (1.3.9-11) ...
25.26 Selecting previously unselected package libutf8proc2:arm64.
25.26 Preparing to unpack .../094-libutf8proc2_2.8.0-1_arm64.deb ...
25.26 Unpacking libutf8proc2:arm64 (2.8.0-1) ...
25.28 Selecting previously unselected package libsvn1:arm64.
25.28 Preparing to unpack .../095-libsvn1_1.14.2-4+b2_arm64.deb ...
25.28 Unpacking libsvn1:arm64 (1.14.2-4+b2) ...
25.35 Selecting previously unselected package make.
25.35 Preparing to unpack .../096-make_4.3-4.1_arm64.deb ...
25.36 Unpacking make (4.3-4.1) ...
25.39 Selecting previously unselected package manpages-dev.
25.39 Preparing to unpack .../097-manpages-dev_6.03-2_all.deb ...
25.39 Unpacking manpages-dev (6.03-2) ...
25.52 Selecting previously unselected package python3.11-dev.
25.52 Preparing to unpack .../098-python3.11-dev_3.11.2-6+deb12u3_arm64.deb ...
25.52 Unpacking python3.11-dev (3.11.2-6+deb12u3) ...
25.54 Selecting previously unselected package python3-lib2to3.
25.54 Preparing to unpack .../099-python3-lib2to3_3.11.2-3_all.deb ...
25.54 Unpacking python3-lib2to3 (3.11.2-3) ...
25.56 Selecting previously unselected package python3-distutils.
25.56 Preparing to unpack .../100-python3-distutils_3.11.2-3_all.deb ...
25.56 Unpacking python3-distutils (3.11.2-3) ...
25.58 Selecting previously unselected package python3-dev.
25.58 Preparing to unpack .../101-python3-dev_3.11.2-1+b1_arm64.deb ...
25.58 Unpacking python3-dev (3.11.2-1+b1) ...
25.60 Selecting previously unselected package subversion.
25.60 Preparing to unpack .../102-subversion_1.14.2-4+b2_arm64.deb ...
25.61 Unpacking subversion (1.14.2-4+b2) ...
25.67 Setting up media-types (10.0.0) ...
25.67 Setting up javascript-common (11+nmu1) ...
25.68 Setting up libaom3:arm64 (3.6.0-1+deb12u1) ...
25.69 Setting up libabsl20220623:arm64 (20220623.1-1) ...
25.69 Setting up libxau6:arm64 (1:1.0.9-1) ...
25.69 Setting up liblerc4:arm64 (4.0.0+ds-2) ...
25.70 Setting up manpages (6.03-2) ...
25.70 Setting up libpython3.11-stdlib:arm64 (3.11.2-6+deb12u3) ...
25.70 Setting up libutf8proc2:arm64 (2.8.0-1) ...
25.70 Setting up libbrotli1:arm64 (1.0.9-2+b6) ...
25.71 Setting up libsasl2-modules:arm64 (2.1.28+dfsg-10) ...
25.71 Setting up binutils-common:arm64 (2.40-2) ...
25.72 Setting up libdeflate0:arm64 (1.14-1) ...
25.72 Setting up libapr1:arm64 (1.7.2-3) ...
25.72 Setting up linux-libc-dev:arm64 (6.1.106-3) ...
25.73 Setting up libctf-nobfd0:arm64 (2.40-2) ...
25.73 Setting up m4 (1.4.19-3) ...
25.73 Setting up libsvtav1enc1:arm64 (1.4.1+dfsg-1) ...
25.74 Setting up libgomp1:arm64 (12.2.0-14) ...
25.74 Setting up libjbig0:arm64 (2.1-6.1) ...
25.74 Setting up librav1e0:arm64 (0.5.1-6) ...
25.74 Setting up libjansson4:arm64 (2.14-2) ...
25.75 Setting up libsasl2-modules-db:arm64 (2.1.28+dfsg-10) ...
25.75 Setting up perl-modules-5.36 (5.36.0-7+deb12u1) ...
25.75 Setting up autotools-dev (20220109.1) ...
25.76 Setting up libblas3:arm64 (3.11.0-2) ...
25.76 update-alternatives: using /usr/lib/aarch64-linux-gnu/blas/libblas.so.3 to provide /usr/lib/aarch64-linux-gnu/libblas.so.3 (libblas.so.3-aarch64-linux-gnu) in auto mode
25.76 Setting up libtirpc-dev:arm64 (1.3.3+ds-1) ...
25.76 Setting up rpcsvc-proto (1.4.3-1) ...
25.77 Setting up libjpeg62-turbo:arm64 (1:2.1.5-2) ...
25.77 Setting up libx11-data (2:1.8.4-2+deb12u2) ...
25.77 Setting up make (4.3-4.1) ...
25.78 Setting up libmpfr6:arm64 (4.2.0-1) ...
25.78 Setting up libpng16-16:arm64 (1.6.39-2) ...
25.78 Setting up libmpc3:arm64 (1.3.1-1) ...
25.78 Setting up libatomic1:arm64 (12.2.0-14) ...
25.79 Setting up fonts-dejavu-core (2.37-6) ...
25.80 Setting up libgdbm-compat4:arm64 (1.23-3) ...
25.80 Setting up libgav1-1:arm64 (0.18.0-1+b1) ...
25.81 Setting up libdav1d6:arm64 (1.0.0-2+deb12u1) ...
25.81 Setting up libsasl2-2:arm64 (2.1.28+dfsg-10) ...
25.81 Setting up libgfortran5:arm64 (12.2.0-14) ...
25.82 Setting up libwebp7:arm64 (1.2.4-0.2+deb12u1) ...
25.82 Setting up libubsan1:arm64 (12.2.0-14) ...
25.82 Setting up libnuma1:arm64 (2.0.16-1) ...
25.83 Setting up libnsl-dev:arm64 (1.3.0-2) ...
25.83 Setting up libhwasan0:arm64 (12.2.0-14) ...
25.83 Setting up libcrypt-dev:arm64 (1:4.4.33-2) ...
25.84 Setting up libtiff6:arm64 (4.5.0-6+deb12u1) ...
25.84 Setting up libasan8:arm64 (12.2.0-14) ...
25.84 Setting up libtsan2:arm64 (12.2.0-14) ...
25.84 Setting up libjs-jquery (3.6.1+dfsg+~3.5.14-1) ...
25.85 Setting up libbinutils:arm64 (2.40-2) ...
25.85 Setting up libisl23:arm64 (0.25-1.1) ...
25.86 Setting up libde265-0:arm64 (1.0.11-1+deb12u2) ...
25.86 Setting up libc-dev-bin (2.36-9+deb12u8) ...
25.86 Setting up libbsd0:arm64 (0.11.7-2) ...
25.86 Setting up libyuv0:arm64 (0.0~git20230123.b2528b0-1) ...
25.87 Setting up libcc1-0:arm64 (12.2.0-14) ...
25.87 Setting up libperl5.36:arm64 (5.36.0-7+deb12u1) ...
25.87 Setting up liblsan0:arm64 (12.2.0-14) ...
25.88 Setting up libblas-dev:arm64 (3.11.0-2) ...
25.88 update-alternatives: using /usr/lib/aarch64-linux-gnu/blas/libblas.so to provide /usr/lib/aarch64-linux-gnu/libblas.so (libblas.so-aarch64-linux-gnu) in auto mode
25.88 Setting up libitm1:arm64 (12.2.0-14) ...
25.89 Setting up libpython3-stdlib:arm64 (3.11.2-1+b1) ...
25.89 Setting up libjs-underscore (1.13.4~dfsg+~1.11.4-3) ...
25.89 Setting up libaprutil1:arm64 (1.6.3-1) ...
25.89 Setting up libctf0:arm64 (2.40-2) ...
25.90 Setting up manpages-dev (6.03-2) ...
25.90 Setting up python3.11 (3.11.2-6+deb12u3) ...
26.30 Setting up libxdmcp6:arm64 (1:1.1.2-3) ...
26.31 Setting up liblapack3:arm64 (3.11.0-2) ...
26.31 update-alternatives: using /usr/lib/aarch64-linux-gnu/lapack/liblapack.so.3 to provide /usr/lib/aarch64-linux-gnu/liblapack.so.3 (liblapack.so.3-aarch64-linux-gnu) in auto mode
26.31 Setting up cpp-12 (12.2.0-14) ...
26.31 Setting up libxcb1:arm64 (1.15-1) ...
26.32 Setting up libpython3.11:arm64 (3.11.2-6+deb12u3) ...
26.32 Setting up libavif15:arm64 (0.11.1-1) ...
26.32 Setting up fontconfig-config (2.14.1-4) ...
26.37 debconf: unable to initialize frontend: Dialog
26.37 debconf: (TERM is not set, so the dialog frontend is not usable.)
26.37 debconf: falling back to frontend: Readline
26.37 debconf: unable to initialize frontend: Readline
26.37 debconf: (This frontend requires a controlling tty.)
26.37 debconf: falling back to frontend: Teletype
26.43 Setting up libserf-1-1:arm64 (1.3.9-11) ...
26.44 Setting up python3 (3.11.2-1+b1) ...
26.44 running python rtupdate hooks for python3.11...
26.44 running python post-rtupdate hooks for python3.11...
26.49 Setting up perl (5.36.0-7+deb12u1) ...
26.50 Setting up libgprofng0:arm64 (2.40-2) ...
26.50 Setting up libfreetype6:arm64 (2.12.1+dfsg-5+deb12u3) ...
26.51 Setting up libgcc-12-dev:arm64 (12.2.0-14) ...
26.51 Setting up liblapack-dev:arm64 (3.11.0-2) ...
26.51 update-alternatives: using /usr/lib/aarch64-linux-gnu/lapack/liblapack.so to provide /usr/lib/aarch64-linux-gnu/liblapack.so (liblapack.so-aarch64-linux-gnu) in auto mode
26.51 Setting up libjs-sphinxdoc (5.3.0-4) ...
26.52 Setting up autoconf (2.71-3) ...
26.52 Setting up libx265-199:arm64 (3.5-2+b1) ...
26.52 Setting up cpp (4:12.2.0-3) ...
26.53 Setting up libc6-dev:arm64 (2.36-9+deb12u8) ...
26.53 Setting up libx11-6:arm64 (2:1.8.4-2+deb12u2) ...
26.54 Setting up libfontconfig1:arm64 (2.14.1-4) ...
26.54 Setting up libsvn1:arm64 (1.14.2-4+b2) ...
26.54 Setting up python3-lib2to3 (3.11.2-3) ...
26.59 Setting up automake (1:1.16.5-1.3) ...
26.60 update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode
26.60 update-alternatives: warning: skip creation of /usr/share/man/man1/automake.1.gz because associated file /usr/share/man/man1/automake-1.16.1.gz (of link group automake) doesn't exist
26.60 update-alternatives: warning: skip creation of /usr/share/man/man1/aclocal.1.gz because associated file /usr/share/man/man1/aclocal-1.16.1.gz (of link group automake) doesn't exist
26.60 Setting up python3-distutils (3.11.2-3) ...
26.67 Setting up libxpm4:arm64 (1:3.5.12-1.1+deb12u1) ...
26.67 Setting up libstdc++-12-dev:arm64 (12.2.0-14) ...
26.67 Setting up libheif1:arm64 (1.15.1-1) ...
26.68 Setting up subversion (1.14.2-4+b2) ...
26.68 Setting up binutils-aarch64-linux-gnu (2.40-2) ...
26.69 Setting up binutils (2.40-2) ...
26.69 Setting up libexpat1-dev:arm64 (2.5.0-1+deb12u1) ...
26.69 Setting up gcc-12 (12.2.0-14) ...
26.70 Setting up libgd3:arm64 (2.3.3-9) ...
26.70 Setting up zlib1g-dev:arm64 (1:1.2.13.dfsg-1) ...
26.70 Setting up libc-devtools (2.36-9+deb12u8) ...
26.71 Setting up g++-12 (12.2.0-14) ...
26.71 Setting up gcc (4:12.2.0-3) ...
26.72 Setting up libpython3.11-dev:arm64 (3.11.2-6+deb12u3) ...
26.72 Setting up g++ (4:12.2.0-3) ...
26.72 update-alternatives: using /usr/bin/g++ to provide /usr/bin/c++ (c++) in auto mode
26.73 Setting up libpython3-dev:arm64 (3.11.2-1+b1) ...
26.73 Setting up python3.11-dev (3.11.2-6+deb12u3) ...
26.73 Setting up python3-dev (3.11.2-1+b1) ...
26.73 Processing triggers for libc-bin (2.36-9+deb12u8) ...
27.07 Collecting influxdb-client
27.18   Downloading influxdb_client-1.46.0-py3-none-any.whl.metadata (64 kB)
27.27 Collecting openstef-dbc==3.7.6
27.30   Downloading openstef_dbc-3.7.6-py3-none-any.whl.metadata (4.0 kB)
27.46 Collecting pydantic
27.49   Downloading pydantic-2.9.2-py3-none-any.whl.metadata (149 kB)
27.63 Collecting pydantic-settings
27.66   Downloading pydantic_settings-2.5.2-py3-none-any.whl.metadata (3.5 kB)
27.70 Collecting ciso8601~=2.3.0 (from openstef-dbc==3.7.6)
27.73   Downloading ciso8601-2.3.1.tar.gz (31 kB)
27.74   Installing build dependencies: started
29.00   Installing build dependencies: finished with status 'done'
29.00   Getting requirements to build wheel: started
29.10   Getting requirements to build wheel: finished with status 'done'
29.10   Preparing metadata (pyproject.toml): started
29.20   Preparing metadata (pyproject.toml): finished with status 'done'
29.25 Collecting geopy~=2.3.0 (from openstef-dbc==3.7.6)
29.27   Downloading geopy-2.3.0-py3-none-any.whl.metadata (6.7 kB)
29.34 Collecting openstef~=3.4.4 (from openstef-dbc==3.7.6)
29.37   Downloading openstef-3.4.33-py3-none-any.whl.metadata (7.4 kB)
29.37 Collecting influxdb-client
29.40   Downloading influxdb_client-1.36.1-py3-none-any.whl.metadata (63 kB)
29.48 Collecting mysql-connector-python~=8.3.0 (from openstef-dbc==3.7.6)
29.50   Downloading mysql_connector_python-8.3.0-cp310-cp310-manylinux_2_17_aarch64.whl.metadata (2.0 kB)
29.54 Collecting PyMySQL~=1.0.2 (from openstef-dbc==3.7.6)
29.57   Downloading PyMySQL-1.0.3-py3-none-any.whl.metadata (4.4 kB)
29.63 Collecting PyYAML~=6.0 (from openstef-dbc==3.7.6)
29.66   Downloading PyYAML-6.0.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (2.1 kB)
29.71 Collecting requests~=2.28.1 (from openstef-dbc==3.7.6)
29.74   Downloading requests-2.28.2-py3-none-any.whl.metadata (4.6 kB)
30.05 Collecting SQLAlchemy~=2.0.21 (from openstef-dbc==3.7.6)
30.07   Downloading SQLAlchemy-2.0.35-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (9.6 kB)
30.12 Collecting reactivex>=4.0.4 (from influxdb-client)
30.15   Downloading reactivex-4.0.4-py3-none-any.whl.metadata (5.5 kB)
30.19 Collecting certifi>=14.05.14 (from influxdb-client)
30.22   Downloading certifi-2024.8.30-py3-none-any.whl.metadata (2.2 kB)
30.26 Collecting python-dateutil>=2.5.3 (from influxdb-client)
30.28   Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl.metadata (8.4 kB)
30.29 Requirement already satisfied: setuptools>=21.0.0 in /usr/local/lib/python3.10/site-packages (from influxdb-client) (65.5.1)
30.34 Collecting urllib3>=1.26.0 (from influxdb-client)
30.37   Downloading urllib3-2.2.3-py3-none-any.whl.metadata (6.5 kB)
30.40 Collecting annotated-types>=0.6.0 (from pydantic)
30.43   Downloading annotated_types-0.7.0-py3-none-any.whl.metadata (15 kB)
31.01 Collecting pydantic-core==2.23.4 (from pydantic)
31.04   Downloading pydantic_core-2.23.4-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (6.6 kB)
31.08 Collecting typing-extensions>=4.6.1 (from pydantic)
31.10   Downloading typing_extensions-4.12.2-py3-none-any.whl.metadata (3.0 kB)
31.15 Collecting python-dotenv>=0.21.0 (from pydantic-settings)
31.18   Downloading python_dotenv-1.0.1-py3-none-any.whl.metadata (23 kB)
31.22 Collecting geographiclib<3,>=1.52 (from geopy~=2.3.0->openstef-dbc==3.7.6)
31.25   Downloading geographiclib-2.0-py3-none-any.whl.metadata (1.4 kB)
31.30 Collecting holidays==0.21 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.33   Downloading holidays-0.21-py3-none-any.whl.metadata (15 kB)
31.37 Collecting joblib==1.3.2 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.40   Downloading joblib-1.3.2-py3-none-any.whl.metadata (5.4 kB)
31.44 Collecting lightgbm~=3.3 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.47   Downloading lightgbm-3.3.5-py3-none-manylinux2014_aarch64.whl.metadata (15 kB)
31.61 Collecting matplotlib~=3.7 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.64   Downloading matplotlib-3.9.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (11 kB)
31.69 Collecting mlflow~=2.3 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.72   Downloading mlflow-2.16.2-py3-none-any.whl.metadata (29 kB)
31.78 Collecting networkx~=3.1 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.80   Downloading networkx-3.3-py3-none-any.whl.metadata (5.1 kB)
31.85 Collecting optuna~=3.1 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.88   Downloading optuna-3.6.1-py3-none-any.whl.metadata (17 kB)
31.92 Collecting optuna-integration~=3.6 (from openstef~=3.4.4->openstef-dbc==3.7.6)
31.95   Downloading optuna_integration-3.6.0-py3-none-any.whl.metadata (10 kB)
32.12 Collecting pandas~=2.2.0 (from openstef~=3.4.4->openstef-dbc==3.7.6)
32.15   Downloading pandas-2.2.3-cp310-cp310-manylinux2014_aarch64.manylinux_2_17_aarch64.whl.metadata (89 kB)
32.24 Collecting plotly~=5.18 (from openstef~=3.4.4->openstef-dbc==3.7.6)
32.27   Downloading plotly-5.24.1-py3-none-any.whl.metadata (7.3 kB)
32.31 Collecting pvlib==0.9.4 (from openstef~=3.4.4->openstef-dbc==3.7.6)
32.34   Downloading pvlib-0.9.4-py3-none-any.whl.metadata (4.3 kB)
32.39 Collecting pymsteams~=0.2.2 (from openstef~=3.4.4->openstef-dbc==3.7.6)
32.41   Downloading pymsteams-0.2.3.tar.gz (12 kB)
32.42   Preparing metadata (setup.py): started
32.68   Preparing metadata (setup.py): finished with status 'done'
32.78 Collecting scikit-learn~=1.3 (from openstef~=3.4.4->openstef-dbc==3.7.6)
32.81   Downloading scikit_learn-1.5.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (13 kB)
32.93 Collecting scipy~=1.10 (from openstef~=3.4.4->openstef-dbc==3.7.6)
32.96   Downloading scipy-1.14.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (60 kB)
33.04 Collecting statsmodels<1.0.0,>=0.13.5 (from openstef~=3.4.4->openstef-dbc==3.7.6)
33.07   Downloading statsmodels-0.14.3-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (9.2 kB)
33.11 Collecting structlog<25,>=23.1 (from openstef~=3.4.4->openstef-dbc==3.7.6)
33.14   Downloading structlog-24.4.0-py3-none-any.whl.metadata (7.3 kB)
33.19 Collecting xgboost~=2.0 (from openstef~=3.4.4->openstef-dbc==3.7.6)
33.22   Downloading xgboost-2.1.1-py3-none-manylinux_2_28_aarch64.whl.metadata (2.1 kB)
33.26 Collecting PyMeeus (from holidays==0.21->openstef~=3.4.4->openstef-dbc==3.7.6)
33.29   Downloading PyMeeus-0.5.12.tar.gz (5.8 MB)
33.92      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.8/5.8 MB 9.7 MB/s eta 0:00:00
34.11   Preparing metadata (setup.py): started
34.23   Preparing metadata (setup.py): finished with status 'done'
34.27 Collecting convertdate>=2.3.0 (from holidays==0.21->openstef~=3.4.4->openstef-dbc==3.7.6)
34.30   Downloading convertdate-2.4.0-py3-none-any.whl.metadata (8.3 kB)
34.34 Collecting hijri-converter (from holidays==0.21->openstef~=3.4.4->openstef-dbc==3.7.6)
34.37   Downloading hijri_converter-2.3.1-py3-none-any.whl.metadata (2.7 kB)
34.40 Collecting korean-lunar-calendar (from holidays==0.21->openstef~=3.4.4->openstef-dbc==3.7.6)
34.43   Downloading korean_lunar_calendar-0.3.1-py3-none-any.whl.metadata (2.8 kB)
34.64 Collecting numpy>=1.16.0 (from pvlib==0.9.4->openstef~=3.4.4->openstef-dbc==3.7.6)
34.66   Downloading numpy-2.1.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (62 kB)
34.74 Collecting pytz (from pvlib==0.9.4->openstef~=3.4.4->openstef-dbc==3.7.6)
34.77   Downloading pytz-2024.2-py2.py3-none-any.whl.metadata (22 kB)
34.87 Collecting h5py (from pvlib==0.9.4->openstef~=3.4.4->openstef-dbc==3.7.6)
34.90   Downloading h5py-3.11.0.tar.gz (406 kB)
35.01   Installing build dependencies: started
40.29   Installing build dependencies: finished with status 'done'
40.29   Getting requirements to build wheel: started
40.46   Getting requirements to build wheel: finished with status 'done'
40.46   Preparing metadata (pyproject.toml): started
40.63   Preparing metadata (pyproject.toml): finished with status 'done'
40.66 Collecting six>=1.5 (from python-dateutil>=2.5.3->influxdb-client)
40.69   Downloading six-1.16.0-py2.py3-none-any.whl.metadata (1.8 kB)
40.79 Collecting charset-normalizer<4,>=2 (from requests~=2.28.1->openstef-dbc==3.7.6)
40.82   Downloading charset_normalizer-3.3.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (33 kB)
40.86 Collecting idna<4,>=2.5 (from requests~=2.28.1->openstef-dbc==3.7.6)
40.89   Downloading idna-3.10-py3-none-any.whl.metadata (10 kB)
40.90 Collecting urllib3>=1.26.0 (from influxdb-client)
40.92   Downloading urllib3-1.26.20-py2.py3-none-any.whl.metadata (50 kB)
41.08 Collecting greenlet!=0.4.17 (from SQLAlchemy~=2.0.21->openstef-dbc==3.7.6)
41.10   Downloading greenlet-3.1.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (3.8 kB)
41.11 Requirement already satisfied: wheel in /usr/local/lib/python3.10/site-packages (from lightgbm~=3.3->openstef~=3.4.4->openstef-dbc==3.7.6) (0.44.0)
41.19 Collecting contourpy>=1.0.1 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
41.22   Downloading contourpy-1.3.0-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (5.4 kB)
41.26 Collecting cycler>=0.10 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
41.28   Downloading cycler-0.12.1-py3-none-any.whl.metadata (3.8 kB)
41.45 Collecting fonttools>=4.22.0 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
41.47   Downloading fonttools-4.54.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (163 kB)
41.59 Collecting kiwisolver>=1.3.1 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
41.62   Downloading kiwisolver-1.4.7-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (6.3 kB)
41.67 Collecting packaging>=20.0 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
41.69   Downloading packaging-24.1-py3-none-any.whl.metadata (3.2 kB)
42.04 Collecting pillow>=8 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
42.06   Downloading pillow-10.4.0-cp310-cp310-manylinux_2_28_aarch64.whl.metadata (9.2 kB)
42.12 Collecting pyparsing>=2.3.1 (from matplotlib~=3.7->openstef~=3.4.4->openstef-dbc==3.7.6)
42.15   Downloading pyparsing-3.1.4-py3-none-any.whl.metadata (5.1 kB)
42.20 Collecting mlflow-skinny==2.16.2 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.22   Downloading mlflow_skinny-2.16.2-py3-none-any.whl.metadata (30 kB)
42.28 Collecting Flask<4 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.31   Downloading flask-3.0.3-py3-none-any.whl.metadata (3.2 kB)
42.36 Collecting alembic!=1.10.0,<2 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.39   Downloading alembic-1.13.3-py3-none-any.whl.metadata (7.4 kB)
42.44 Collecting docker<8,>=4.0.0 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.46   Downloading docker-7.1.0-py3-none-any.whl.metadata (3.8 kB)
42.59 Collecting graphene<4 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.62   Downloading graphene-3.3-py2.py3-none-any.whl.metadata (7.7 kB)
42.67 Collecting markdown<4,>=3.3 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.69   Downloading Markdown-3.7-py3-none-any.whl.metadata (7.0 kB)
42.80 Collecting pyarrow<18,>=4.0.0 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.82   Downloading pyarrow-17.0.0-cp310-cp310-manylinux_2_28_aarch64.whl.metadata (3.3 kB)
42.88 Collecting Jinja2<4,>=2.11 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.91   Downloading jinja2-3.1.4-py3-none-any.whl.metadata (2.6 kB)
42.96 Collecting gunicorn<24 (from mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
42.99   Downloading gunicorn-23.0.0-py3-none-any.whl.metadata (4.4 kB)
43.03 Collecting cachetools<6,>=5.0.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.05   Downloading cachetools-5.5.0-py3-none-any.whl.metadata (5.3 kB)
43.10 Collecting click<9,>=7.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.13   Downloading click-8.1.7-py3-none-any.whl.metadata (3.0 kB)
43.17 Collecting cloudpickle<4 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.20   Downloading cloudpickle-3.0.0-py3-none-any.whl.metadata (7.0 kB)
43.24 Collecting databricks-sdk<1,>=0.20.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.27   Downloading databricks_sdk-0.32.3-py3-none-any.whl.metadata (37 kB)
43.33 Collecting gitpython<4,>=3.1.9 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.36   Downloading GitPython-3.1.43-py3-none-any.whl.metadata (13 kB)
43.43 Collecting importlib-metadata!=4.7.0,<9,>=3.7.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.46   Downloading importlib_metadata-8.5.0-py3-none-any.whl.metadata (4.8 kB)
43.51 Collecting opentelemetry-api<3,>=1.9.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.54   Downloading opentelemetry_api-1.27.0-py3-none-any.whl.metadata (1.4 kB)
43.58 Collecting opentelemetry-sdk<3,>=1.9.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
43.61   Downloading opentelemetry_sdk-1.27.0-py3-none-any.whl.metadata (1.5 kB)
43.98 Collecting protobuf<6,>=3.12.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.01   Downloading protobuf-5.28.2-cp38-abi3-manylinux2014_aarch64.whl.metadata (592 bytes)
44.05 Collecting sqlparse<1,>=0.4.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.08   Downloading sqlparse-0.5.1-py3-none-any.whl.metadata (3.9 kB)
44.13 Collecting colorlog (from optuna~=3.1->openstef~=3.4.4->openstef-dbc==3.7.6)
44.16   Downloading colorlog-6.8.2-py3-none-any.whl.metadata (10 kB)
44.23 Collecting tqdm (from optuna~=3.1->openstef~=3.4.4->openstef-dbc==3.7.6)
44.26   Downloading tqdm-4.66.5-py3-none-any.whl.metadata (57 kB)
44.32 Collecting tzdata>=2022.7 (from pandas~=2.2.0->openstef~=3.4.4->openstef-dbc==3.7.6)
44.35   Downloading tzdata-2024.2-py2.py3-none-any.whl.metadata (1.4 kB)
44.39 Collecting tenacity>=6.2.0 (from plotly~=5.18->openstef~=3.4.4->openstef-dbc==3.7.6)
44.42   Downloading tenacity-9.0.0-py3-none-any.whl.metadata (1.2 kB)
44.47 Collecting threadpoolctl>=3.1.0 (from scikit-learn~=1.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.50   Downloading threadpoolctl-3.5.0-py3-none-any.whl.metadata (13 kB)
44.56 Collecting patsy>=0.5.6 (from statsmodels<1.0.0,>=0.13.5->openstef~=3.4.4->openstef-dbc==3.7.6)
44.59   Downloading patsy-0.5.6-py2.py3-none-any.whl.metadata (3.5 kB)
44.64 Collecting Mako (from alembic!=1.10.0,<2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.67   Downloading Mako-1.3.5-py3-none-any.whl.metadata (2.9 kB)
44.74 Collecting Werkzeug>=3.0.0 (from Flask<4->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.76   Downloading werkzeug-3.0.4-py3-none-any.whl.metadata (3.7 kB)
44.80 Collecting itsdangerous>=2.1.2 (from Flask<4->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.83   Downloading itsdangerous-2.2.0-py3-none-any.whl.metadata (1.9 kB)
44.87 Collecting blinker>=1.6.2 (from Flask<4->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.90   Downloading blinker-1.8.2-py3-none-any.whl.metadata (1.6 kB)
44.95 Collecting graphql-core<3.3,>=3.1 (from graphene<4->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
44.98   Downloading graphql_core-3.2.4-py3-none-any.whl.metadata (10 kB)
45.02 Collecting graphql-relay<3.3,>=3.1 (from graphene<4->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.05   Downloading graphql_relay-3.2.0-py3-none-any.whl.metadata (12 kB)
45.09 Collecting aniso8601<10,>=8 (from graphene<4->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.11   Downloading aniso8601-9.0.1-py2.py3-none-any.whl.metadata (23 kB)
45.18 Collecting MarkupSafe>=2.0 (from Jinja2<4,>=2.11->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.21   Downloading MarkupSafe-2.1.5-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (3.0 kB)
45.35 Collecting google-auth~=2.0 (from databricks-sdk<1,>=0.20.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.38   Downloading google_auth-2.35.0-py2.py3-none-any.whl.metadata (4.7 kB)
45.54 Collecting gitdb<5,>=4.0.1 (from gitpython<4,>=3.1.9->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.56   Downloading gitdb-4.0.11-py3-none-any.whl.metadata (1.2 kB)
45.62 Collecting zipp>=3.20 (from importlib-metadata!=4.7.0,<9,>=3.7.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.65   Downloading zipp-3.20.2-py3-none-any.whl.metadata (3.7 kB)
45.69 Collecting deprecated>=1.2.6 (from opentelemetry-api<3,>=1.9.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.73   Downloading Deprecated-1.2.14-py2.py3-none-any.whl.metadata (5.4 kB)
45.75 Collecting importlib-metadata!=4.7.0,<9,>=3.7.0 (from mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
45.80   Downloading importlib_metadata-8.4.0-py3-none-any.whl.metadata (4.7 kB)
45.92 Collecting opentelemetry-semantic-conventions==0.48b0 (from opentelemetry-sdk<3,>=1.9.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
46.00   Downloading opentelemetry_semantic_conventions-0.48b0-py3-none-any.whl.metadata (2.4 kB)
46.18 Collecting wrapt<2,>=1.10 (from deprecated>=1.2.6->opentelemetry-api<3,>=1.9.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
46.23   Downloading wrapt-1.16.0-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl.metadata (6.6 kB)
46.29 Collecting smmap<6,>=3.0.1 (from gitdb<5,>=4.0.1->gitpython<4,>=3.1.9->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
46.33   Downloading smmap-5.0.1-py3-none-any.whl.metadata (4.3 kB)
46.39 Collecting pyasn1-modules>=0.2.1 (from google-auth~=2.0->databricks-sdk<1,>=0.20.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
46.42   Downloading pyasn1_modules-0.4.1-py3-none-any.whl.metadata (3.5 kB)
46.46 Collecting rsa<5,>=3.1.4 (from google-auth~=2.0->databricks-sdk<1,>=0.20.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
46.51   Downloading rsa-4.9-py3-none-any.whl.metadata (4.2 kB)
46.57 Collecting pyasn1<0.7.0,>=0.4.6 (from pyasn1-modules>=0.2.1->google-auth~=2.0->databricks-sdk<1,>=0.20.0->mlflow-skinny==2.16.2->mlflow~=2.3->openstef~=3.4.4->openstef-dbc==3.7.6)
46.60   Downloading pyasn1-0.6.1-py3-none-any.whl.metadata (8.4 kB)
46.66 Downloading openstef_dbc-3.7.6-py3-none-any.whl (54 kB)
46.71 Downloading influxdb_client-1.36.1-py3-none-any.whl (721 kB)
46.90    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 721.2/721.2 kB 3.9 MB/s eta 0:00:00
46.92 Downloading pydantic-2.9.2-py3-none-any.whl (434 kB)
47.06 Downloading pydantic_core-2.23.4-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (1.8 MB)
47.44    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.8/1.8 MB 4.8 MB/s eta 0:00:00
47.46 Downloading pydantic_settings-2.5.2-py3-none-any.whl (26 kB)
47.50 Downloading annotated_types-0.7.0-py3-none-any.whl (13 kB)
47.53 Downloading certifi-2024.8.30-py3-none-any.whl (167 kB)
47.59 Downloading geopy-2.3.0-py3-none-any.whl (119 kB)
47.65 Downloading mysql_connector_python-8.3.0-cp310-cp310-manylinux_2_17_aarch64.whl (21.2 MB)
50.50    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 21.2/21.2 MB 7.4 MB/s eta 0:00:00
50.52 Downloading openstef-3.4.33-py3-none-any.whl (170 kB)
50.58 Downloading holidays-0.21-py3-none-any.whl (230 kB)
50.63 Downloading joblib-1.3.2-py3-none-any.whl (302 kB)
50.70 Downloading pvlib-0.9.4-py3-none-any.whl (29.0 MB)
54.07    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 29.0/29.0 MB 8.6 MB/s eta 0:00:00
54.10 Downloading PyMySQL-1.0.3-py3-none-any.whl (43 kB)
54.14 Downloading python_dateutil-2.9.0.post0-py2.py3-none-any.whl (229 kB)
54.20 Downloading python_dotenv-1.0.1-py3-none-any.whl (19 kB)
54.23 Downloading PyYAML-6.0.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (718 kB)
54.31    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 718.5/718.5 kB 8.6 MB/s eta 0:00:00
54.34 Downloading reactivex-4.0.4-py3-none-any.whl (217 kB)
54.41 Downloading requests-2.28.2-py3-none-any.whl (62 kB)
54.44 Downloading SQLAlchemy-2.0.35-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (3.1 MB)
54.82    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 8.0 MB/s eta 0:00:00
54.85 Downloading typing_extensions-4.12.2-py3-none-any.whl (37 kB)
54.89 Downloading urllib3-1.26.20-py2.py3-none-any.whl (144 kB)
55.04 Downloading charset_normalizer-3.3.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (138 kB)
55.20 Downloading geographiclib-2.0-py3-none-any.whl (40 kB)
55.33 Downloading greenlet-3.1.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (637 kB)
56.06    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 637.2/637.2 kB 751.2 kB/s eta 0:00:00
56.13 Downloading idna-3.10-py3-none-any.whl (70 kB)
56.47 Downloading lightgbm-3.3.5-py3-none-manylinux2014_aarch64.whl (2.1 MB)
63.69    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.1/2.1 MB 278.7 kB/s eta 0:00:00
63.76 Downloading matplotlib-3.9.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (8.2 MB)
73.71    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 8.2/8.2 MB 829.1 kB/s eta 0:00:00
73.73 Downloading mlflow-2.16.2-py3-none-any.whl (26.7 MB)
79.06    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 26.7/26.7 MB 5.0 MB/s eta 0:00:00
79.08 Downloading mlflow_skinny-2.16.2-py3-none-any.whl (5.6 MB)
79.86    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.6/5.6 MB 7.2 MB/s eta 0:00:00
79.89 Downloading networkx-3.3-py3-none-any.whl (1.7 MB)
80.11    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.7/1.7 MB 7.7 MB/s eta 0:00:00
80.14 Downloading optuna-3.6.1-py3-none-any.whl (380 kB)
80.22 Downloading optuna_integration-3.6.0-py3-none-any.whl (93 kB)
80.26 Downloading pandas-2.2.3-cp310-cp310-manylinux2014_aarch64.manylinux_2_17_aarch64.whl (66.5 MB)
87.79    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 66.5/66.5 MB 8.8 MB/s eta 0:00:00
87.82 Downloading plotly-5.24.1-py3-none-any.whl (19.1 MB)
89.94    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 19.1/19.1 MB 9.0 MB/s eta 0:00:00
89.97 Downloading scikit_learn-1.5.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (12.5 MB)
91.39    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 12.5/12.5 MB 8.8 MB/s eta 0:00:00
91.42 Downloading scipy-1.14.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (35.6 MB)
95.74    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 35.6/35.6 MB 8.3 MB/s eta 0:00:00
95.76 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB)
95.79 Downloading statsmodels-0.14.3-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (10.4 MB)
97.23    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.4/10.4 MB 7.9 MB/s eta 0:00:00
97.26 Downloading structlog-24.4.0-py3-none-any.whl (67 kB)
97.30 Downloading xgboost-2.1.1-py3-none-manylinux_2_28_aarch64.whl (4.2 MB)
97.81    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.2/4.2 MB 8.2 MB/s eta 0:00:00
97.84 Downloading alembic-1.13.3-py3-none-any.whl (233 kB)
97.89 Downloading contourpy-1.3.0-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (308 kB)
97.96 Downloading convertdate-2.4.0-py3-none-any.whl (47 kB)
98.00 Downloading cycler-0.12.1-py3-none-any.whl (8.3 kB)
98.04 Downloading docker-7.1.0-py3-none-any.whl (147 kB)
98.10 Downloading flask-3.0.3-py3-none-any.whl (101 kB)
98.13 Downloading fonttools-4.54.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (4.6 MB)
98.66    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.6/4.6 MB 8.8 MB/s eta 0:00:00
98.69 Downloading graphene-3.3-py2.py3-none-any.whl (128 kB)
98.73 Downloading gunicorn-23.0.0-py3-none-any.whl (85 kB)
98.77 Downloading jinja2-3.1.4-py3-none-any.whl (133 kB)
98.82 Downloading kiwisolver-1.4.7-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (1.4 MB)
98.99    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.4/1.4 MB 8.3 MB/s eta 0:00:00
99.02 Downloading Markdown-3.7-py3-none-any.whl (106 kB)
99.03 Using cached numpy-2.1.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (14.0 MB)
99.07 Downloading packaging-24.1-py3-none-any.whl (53 kB)
99.11 Downloading patsy-0.5.6-py2.py3-none-any.whl (233 kB)
99.17 Downloading pillow-10.4.0-cp310-cp310-manylinux_2_28_aarch64.whl (4.4 MB)
99.68    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.4/4.4 MB 8.6 MB/s eta 0:00:00
99.71 Downloading pyarrow-17.0.0-cp310-cp310-manylinux_2_28_aarch64.whl (38.7 MB)
104.0    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 38.7/38.7 MB 9.0 MB/s eta 0:00:00
104.1 Downloading pyparsing-3.1.4-py3-none-any.whl (104 kB)
104.1 Downloading pytz-2024.2-py2.py3-none-any.whl (508 kB)
104.2 Downloading tenacity-9.0.0-py3-none-any.whl (28 kB)
104.3 Downloading threadpoolctl-3.5.0-py3-none-any.whl (18 kB)
104.3 Downloading tzdata-2024.2-py2.py3-none-any.whl (346 kB)
104.4 Downloading colorlog-6.8.2-py3-none-any.whl (11 kB)
104.4 Downloading hijri_converter-2.3.1-py3-none-any.whl (13 kB)
104.4 Downloading korean_lunar_calendar-0.3.1-py3-none-any.whl (9.0 kB)
104.5 Downloading tqdm-4.66.5-py3-none-any.whl (78 kB)
104.5 Downloading aniso8601-9.0.1-py2.py3-none-any.whl (52 kB)
104.6 Downloading blinker-1.8.2-py3-none-any.whl (9.5 kB)
104.6 Downloading cachetools-5.5.0-py3-none-any.whl (9.5 kB)
104.6 Downloading click-8.1.7-py3-none-any.whl (97 kB)
104.7 Downloading cloudpickle-3.0.0-py3-none-any.whl (20 kB)
104.7 Downloading databricks_sdk-0.32.3-py3-none-any.whl (555 kB)
104.8    ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 555.1/555.1 kB 8.8 MB/s eta 0:00:00
104.8 Downloading GitPython-3.1.43-py3-none-any.whl (207 kB)
104.9 Downloading graphql_core-3.2.4-py3-none-any.whl (203 kB)
104.9 Downloading graphql_relay-3.2.0-py3-none-any.whl (16 kB)
105.0 Downloading itsdangerous-2.2.0-py3-none-any.whl (16 kB)
105.0 Downloading MarkupSafe-2.1.5-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (26 kB)
105.0 Downloading opentelemetry_api-1.27.0-py3-none-any.whl (63 kB)
105.1 Downloading importlib_metadata-8.4.0-py3-none-any.whl (26 kB)
105.1 Downloading opentelemetry_sdk-1.27.0-py3-none-any.whl (110 kB)
105.2 Downloading opentelemetry_semantic_conventions-0.48b0-py3-none-any.whl (149 kB)
105.2 Downloading protobuf-5.28.2-cp38-abi3-manylinux2014_aarch64.whl (316 kB)
105.3 Downloading sqlparse-0.5.1-py3-none-any.whl (44 kB)
105.3 Downloading werkzeug-3.0.4-py3-none-any.whl (227 kB)
105.4 Downloading Mako-1.3.5-py3-none-any.whl (78 kB)
105.4 Downloading Deprecated-1.2.14-py2.py3-none-any.whl (9.6 kB)
105.4 Downloading gitdb-4.0.11-py3-none-any.whl (62 kB)
105.5 Downloading google_auth-2.35.0-py2.py3-none-any.whl (208 kB)
105.5 Downloading zipp-3.20.2-py3-none-any.whl (9.2 kB)
105.6 Downloading pyasn1_modules-0.4.1-py3-none-any.whl (181 kB)
105.6 Downloading rsa-4.9-py3-none-any.whl (34 kB)
105.7 Downloading smmap-5.0.1-py3-none-any.whl (24 kB)
105.7 Downloading wrapt-1.16.0-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (80 kB)
105.7 Downloading pyasn1-0.6.1-py3-none-any.whl (83 kB)
106.1 Building wheels for collected packages: ciso8601, pymsteams, PyMeeus, h5py
106.1   Building wheel for ciso8601 (pyproject.toml): started
106.5   Building wheel for ciso8601 (pyproject.toml): finished with status 'done'
106.5   Created wheel for ciso8601: filename=ciso8601-2.3.1-cp310-cp310-linux_aarch64.whl size=38618 sha256=8735efb462dd8a7861c672c95010352acd54a5c2b252de1ae10a4c098b852811
106.5   Stored in directory: /root/.cache/pip/wheels/c9/b1/bd/30bb47812530104646d737caa50062224d9ed40369a93e6705
106.6   Building wheel for pymsteams (setup.py): started
106.7   Building wheel for pymsteams (setup.py): finished with status 'done'
106.7   Created wheel for pymsteams: filename=pymsteams-0.2.3-py3-none-any.whl size=10898 sha256=fc466449a9bb42b2ea283a8466f68d21ea01b91dfa36bd91df94e0e0787e0c0d
106.7   Stored in directory: /root/.cache/pip/wheels/45/4d/43/8e5cc7d393261b0b3822692b5eb7a9a944a4dc24343168c80c
106.7   Building wheel for PyMeeus (setup.py): started
107.0   Building wheel for PyMeeus (setup.py): finished with status 'done'
107.0   Created wheel for PyMeeus: filename=PyMeeus-0.5.12-py3-none-any.whl size=732001 sha256=4d2038fa9b23227d55ffe9e6824e9d6fc329bba7c3f34f3f82d66d88d028f3bf
107.0   Stored in directory: /root/.cache/pip/wheels/d6/67/78/aa2e8d108639dd23a5e9e72a4fc88bb44f5541894382712f48
107.0   Building wheel for h5py (pyproject.toml): started
107.2   Building wheel for h5py (pyproject.toml): finished with status 'error'
107.2   error: subprocess-exited-with-error
107.2   
107.2   × Building wheel for h5py (pyproject.toml) did not run successfully.
107.2   │ exit code: 1
107.2   ╰─> [71 lines of output]
107.2       running bdist_wheel
107.2       running build
107.2       running build_py
107.2       creating build/lib.linux-aarch64-cpython-310/h5py
107.2       copying h5py/h5py_warnings.py -> build/lib.linux-aarch64-cpython-310/h5py
107.2       copying h5py/ipy_completer.py -> build/lib.linux-aarch64-cpython-310/h5py
107.2       copying h5py/version.py -> build/lib.linux-aarch64-cpython-310/h5py
107.2       copying h5py/__init__.py -> build/lib.linux-aarch64-cpython-310/h5py
107.2       creating build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/selections.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/files.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/selections2.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/group.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/base.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/vds.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/dataset.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/datatype.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/compat.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/attrs.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/filters.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/__init__.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       copying h5py/_hl/dims.py -> build/lib.linux-aarch64-cpython-310/h5py/_hl
107.2       creating build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_file.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_base.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5pl.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_slicing.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_file_image.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_attribute_create.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5o.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5f.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_attrs_data.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_selections.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_ros3.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_file2.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_objects.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_filters.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5z.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_dataset_swmr.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_file_alignment.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_completions.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_dataset.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_attrs.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_dtype.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5d_direct_chunk.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_datatype.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_errors.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_group.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/conftest.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5p.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/__init__.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_dataset_getitem.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_h5t.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_big_endian_file.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_dimension_scales.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/common.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       copying h5py/tests/test_dims_dimensionproxy.py -> build/lib.linux-aarch64-cpython-310/h5py/tests
107.2       creating build/lib.linux-aarch64-cpython-310/h5py/tests/data_files
107.2       copying h5py/tests/data_files/__init__.py -> build/lib.linux-aarch64-cpython-310/h5py/tests/data_files
107.2       creating build/lib.linux-aarch64-cpython-310/h5py/tests/test_vds
107.2       copying h5py/tests/test_vds/test_lowlevel_vds.py -> build/lib.linux-aarch64-cpython-310/h5py/tests/test_vds
107.2       copying h5py/tests/test_vds/test_virtual_source.py -> build/lib.linux-aarch64-cpython-310/h5py/tests/test_vds
107.2       copying h5py/tests/test_vds/__init__.py -> build/lib.linux-aarch64-cpython-310/h5py/tests/test_vds
107.2       copying h5py/tests/test_vds/test_highlevel_vds.py -> build/lib.linux-aarch64-cpython-310/h5py/tests/test_vds
107.2       copying h5py/tests/data_files/vlen_string_s390x.h5 -> build/lib.linux-aarch64-cpython-310/h5py/tests/data_files
107.2       copying h5py/tests/data_files/vlen_string_dset.h5 -> build/lib.linux-aarch64-cpython-310/h5py/tests/data_files
107.2       copying h5py/tests/data_files/vlen_string_dset_utc.h5 -> build/lib.linux-aarch64-cpython-310/h5py/tests/data_files
107.2       running build_ext
107.2       Building h5py requires pkg-config unless the HDF5 path is explicitly specified using the environment variable HDF5_DIR. For more information and details, see https://docs.h5py.org/en/stable/build.html#custom-installation
107.2       error: pkg-config probably not installed: FileNotFoundError(2, 'No such file or directory')
107.2       [end of output]
107.2   
107.2   note: This error originates from a subprocess, and is likely not a problem with pip.
107.2   ERROR: Failed building wheel for h5py
107.2 Successfully built ciso8601 pymsteams PyMeeus
107.2 Failed to build h5py
107.2 ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (h5py)
------
failed to solve: process "/bin/sh -c apt-get update  && pip install --upgrade pip  && apt-get install -y make automake gcc g++ subversion python3-dev libblas3 liblapack3 liblapack-dev libblas-dev  && pip install influxdb-client openstef-dbc==3.7.6 pydantic pydantic-settings" did not complete successfully: exit code: 1

[ruchan-ziya]

Here is the complete output...

ruchanziya@FQPY9GJ6YY openstef-reference-master % sudo docker-compose up   
Password:
[+] Building 28.7s (12/14)                                                       docker:desktop-linux
 => [mlflow internal] load build definition from Dockerfile                                      0.0s
 => => transferring dockerfile: 636B                                                             0.0s
 => WARN: JSONArgsRecommended: JSON arguments recommended for CMD to prevent unintended behavio  0.0s
 => [influx-configurator internal] load build definition from Dockerfile                         0.0s
 => => transferring dockerfile: 493B                                                             0.0s
 => [mlflow internal] load metadata for docker.io/library/python:3.10-slim                       0.0s
 => [influx-configurator internal] load .dockerignore                                            0.0s
 => => transferring context: 148B                                                                0.0s
 => [mlflow internal] load .dockerignore                                                         0.0s
 => => transferring context: 2B                                                                  0.0s
 => [influx-configurator internal] load build context                                            0.0s
 => => transferring context: 1.37kB                                                              0.0s
 => CACHED [mlflow 1/4] FROM docker.io/library/python:3.10-slim                                  0.0s
 => [mlflow internal] load build context                                                         0.0s
 => => transferring context: 120B                                                                0.0s
 => CANCELED [influx-configurator 2/4] RUN apt-get update  && pip install --upgrade pip  && ap  28.7s
 => CACHED [mlflow 2/4] RUN apt-get update -y && apt-get install -y --no-install-recommends bui  0.0s
 => CACHED [mlflow 3/4] COPY ./requirements.txt ./requirements.txt                               0.0s
 => ERROR [mlflow 4/4] RUN pip install -r requirements.txt                                      28.7s
------
 > [mlflow 4/4] RUN pip install -r requirements.txt:
1.461 Collecting cryptography
1.517   Downloading cryptography-43.0.1-cp39-abi3-manylinux_2_28_aarch64.whl (3.8 MB)
2.564      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.8/3.8 MB 3.6 MB/s eta 0:00:00
2.607 Collecting mlflow~=2.3
2.622   Downloading mlflow-2.16.2-py3-none-any.whl (26.7 MB)
5.929      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 26.7/26.7 MB 9.6 MB/s eta 0:00:00
6.125 Collecting protobuf==4.21.12
6.139   Downloading protobuf-4.21.12-cp37-abi3-manylinux2014_aarch64.whl (405 kB)
6.186      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 405.1/405.1 kB 8.7 MB/s eta 0:00:00
6.271 Collecting psycopg2-binary==2.9.5
6.307   Downloading psycopg2_binary-2.9.5-cp310-cp310-manylinux_2_24_aarch64.whl (3.4 MB)
6.698      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.4/3.4 MB 8.6 MB/s eta 0:00:00
6.734 Collecting PyMySQL==1.0.2
6.761   Downloading PyMySQL-1.0.2-py3-none-any.whl (43 kB)
6.772      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 43.8/43.8 kB 8.3 MB/s eta 0:00:00
6.982 Collecting cffi>=1.12
7.017   Downloading cffi-1.17.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (448 kB)
7.080      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 448.2/448.2 kB 7.1 MB/s eta 0:00:00
7.179 Collecting graphene<4
7.204   Downloading graphene-3.3-py2.py3-none-any.whl (128 kB)
7.226      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 128.2/128.2 kB 6.3 MB/s eta 0:00:00
7.395 Collecting scikit-learn<2
7.414   Downloading scikit_learn-1.5.2-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (12.5 MB)
9.788      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 12.5/12.5 MB 5.1 MB/s eta 0:00:00
10.13 Collecting numpy<3
10.16   Downloading numpy-2.1.1-cp310-cp310-manylinux_2_17_aarch64.manylinux2014_aarch64.whl (14.0 MB)
12.30      ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 14.0/14.0 MB 6.4 MB/s eta 0:00:00
12.46 Collecting pyarrow<18,>=4.0.0
12.48   Downloading pyarrow-17.0.0-cp310-cp310-manylinux_2_28_aarch64.whl (38.7 MB)
28.41      ━━━━                                     4.3/38.7 MB 4.6 MB/s eta 0:00:08
28.42 ERROR: Exception:
28.42 Traceback (most recent call last):
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/urllib3/response.py", line 438, in _error_catcher
28.42     yield
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/urllib3/response.py", line 561, in read
28.42     data = self._fp_read(amt) if not fp_closed else b""
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/urllib3/response.py", line 527, in _fp_read
28.42     return self._fp.read(amt) if amt is not None else self._fp.read()
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/cachecontrol/filewrapper.py", line 90, in read
28.42     data = self.__fp.read(amt)
28.42   File "/usr/local/lib/python3.10/http/client.py", line 466, in read
28.42     s = self.fp.read(amt)
28.42   File "/usr/local/lib/python3.10/socket.py", line 705, in readinto
28.42     return self._sock.recv_into(b)
28.42   File "/usr/local/lib/python3.10/ssl.py", line 1274, in recv_into
28.42     return self.read(nbytes, buffer)
28.42   File "/usr/local/lib/python3.10/ssl.py", line 1130, in read
28.42     return self._sslobj.read(len, buffer)
28.42 TimeoutError: The read operation timed out
28.42 
28.42 During handling of the above exception, another exception occurred:
28.42 
28.42 Traceback (most recent call last):
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/cli/base_command.py", line 160, in exc_logging_wrapper
28.42     status = run_func(*args)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/cli/req_command.py", line 247, in wrapper
28.42     return func(self, options, args)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/commands/install.py", line 419, in run
28.42     requirement_set = resolver.resolve(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/resolver.py", line 92, in resolve
28.42     result = self._result = resolver.resolve(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/resolvelib/resolvers.py", line 481, in resolve
28.42     state = resolution.resolve(requirements, max_rounds=max_rounds)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/resolvelib/resolvers.py", line 373, in resolve
28.42     failure_causes = self._attempt_to_pin_criterion(name)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/resolvelib/resolvers.py", line 213, in _attempt_to_pin_criterion
28.42     criteria = self._get_updated_criteria(candidate)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/resolvelib/resolvers.py", line 204, in _get_updated_criteria
28.42     self._add_to_criteria(criteria, requirement, parent=candidate)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/resolvelib/resolvers.py", line 172, in _add_to_criteria
28.42     if not criterion.candidates:
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/resolvelib/structs.py", line 151, in __bool__
28.42     return bool(self._sequence)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/found_candidates.py", line 155, in __bool__
28.42     return any(self)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/found_candidates.py", line 143, in <genexpr>
28.42     return (c for c in iterator if id(c) not in self._incompatible_ids)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/found_candidates.py", line 47, in _iter_built
28.42     candidate = func()
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/factory.py", line 206, in _make_candidate_from_link
28.42     self._link_candidate_cache[link] = LinkCandidate(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/candidates.py", line 297, in __init__
28.42     super().__init__(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/candidates.py", line 162, in __init__
28.42     self.dist = self._prepare()
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/candidates.py", line 231, in _prepare
28.42     dist = self._prepare_distribution()
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/resolution/resolvelib/candidates.py", line 308, in _prepare_distribution
28.42     return preparer.prepare_linked_requirement(self._ireq, parallel_builds=True)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/operations/prepare.py", line 491, in prepare_linked_requirement
28.42     return self._prepare_linked_requirement(req, parallel_builds)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/operations/prepare.py", line 536, in _prepare_linked_requirement
28.42     local_file = unpack_url(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/operations/prepare.py", line 166, in unpack_url
28.42     file = get_http_url(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/operations/prepare.py", line 107, in get_http_url
28.42     from_path, content_type = download(link, temp_dir.path)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/network/download.py", line 147, in __call__
28.42     for chunk in chunks:
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/cli/progress_bars.py", line 53, in _rich_progress_bar
28.42     for chunk in iterable:
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_internal/network/utils.py", line 63, in response_chunks
28.42     for chunk in response.raw.stream(
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/urllib3/response.py", line 622, in stream
28.42     data = self.read(amt=amt, decode_content=decode_content)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/urllib3/response.py", line 560, in read
28.42     with self._error_catcher():
28.42   File "/usr/local/lib/python3.10/contextlib.py", line 153, in __exit__
28.42     self.gen.throw(typ, value, traceback)
28.42   File "/usr/local/lib/python3.10/site-packages/pip/_vendor/urllib3/response.py", line 443, in _error_catcher
28.42     raise ReadTimeoutError(self._pool, None, "Read timed out.")
28.42 pip._vendor.urllib3.exceptions.ReadTimeoutError: HTTPSConnectionPool(host='files.pythonhosted.org', port=443): Read timed out.
28.53 
28.53 [notice] A new release of pip is available: 23.0.1 -> 24.2
28.53 [notice] To update, run: pip install --upgrade pip
------
failed to solve: process "/bin/sh -c pip install -r requirements.txt" did not complete successfully: exit code: 2
ruchanziya@FQPY9GJ6YY openstef-reference-master % 

[gecube]

@ruchan-ziya I am kindly asking to add a proper formatting to the output

[gecube]

I have rosetta installed:

$ /usr/bin/pgrep -q oahd && echo Yes || echo No
Yes

It helped to run influxdb configurator:

$ git diff
diff --git a/influxdb-configurator/Dockerfile b/influxdb-configurator/Dockerfile
index f40ceb1..946b896 100644
--- a/influxdb-configurator/Dockerfile
+++ b/influxdb-configurator/Dockerfile
@@ -2,7 +2,7 @@ FROM python:3.10-slim

 RUN apt-get update \
  && pip install --upgrade pip \
- && apt-get install -y make automake gcc g++ subversion python3-dev libblas3 liblapack3 liblapack-dev libblas-dev \
+ && apt-get install -y make automake gcc g++ subversion python3-dev libblas3 liblapack3 liblapack-dev libblas-dev pkg-config libhdf5-dev \
  && pip install influxdb-client openstef-dbc==3.7.6 pydantic pydantic-settings

$ sysctl -a | grep machdep.cpu
machdep.cpu.cores_per_package: 8
machdep.cpu.core_count: 8
machdep.cpu.logical_per_package: 8
machdep.cpu.thread_count: 8
machdep.cpu.brand_string: Apple M1 Pro

[ruchan-ziya]

And on another note docker-compose had to be run as a regular user first. As

sudo docker-compose up was failing with

must use ASL logging (which requires CGO) if running as root

ruchanziya@FQPY9GJ6YY openstef-reference-master % sudo docker-compose up
Password:
2024/09/25 15:50:21 must use ASL logging (which requires CGO) if running as root
2024/09/25 15:50:21 must use ASL logging (which requires CGO) if running as root
2024/09/25 15:50:21 must use ASL logging (which requires CGO) if running as root
2024/09/25 15:50:21 must use ASL logging (which requires CGO) if running as root
2024/09/25 15:50:21 must use ASL logging (which requires CGO) if running as root
2024/09/25 15:50:21 must use ASL logging (which requires CGO) if running as root
[+] Running 0/0
 ⠋ grafana-configurator Pulling                                                                  0.1s 
 ⠋ influxdb Pulling                                                                              0.1s 
 ⠋ nginx Pulling                                                                                 0.1s 
 ⠋ phpmyadmin Pulling                                                                            0.1s 
 ⠋ grafana Pulling                                                                               0.1s 
 ⠋ mysql Pulling                                                                                 0.1s 
error getting credentials - err: exit status 1, out: ``

but once I ran docker-compose as a regular user

ruchanziya@FQPY9GJ6YY openstef-reference-master % docker-compose up 
[+] Running 61/6
 ✔ nginx Pulled                                                                                 28.9s 
 ✔ grafana-configurator Pulled                                                                  43.5s 
 ✔ phpmyadmin Pulled                                                                            39.0s 
 ✔ mysql Pulled                                                                                 63.0s 
 ✔ grafana Pulled                                                                               80.1s 
 ✔ influxdb Pulled                                                                              85.7s 
open /Users/ruchanziya/.docker/buildx/current: permission denied

I can run it as root now without triggering the ASL logging error.

ruchanziya@FQPY9GJ6YY openstef-reference-master % sudo docker-compose up
[+] Building 0.3s (2/3)                                                          docker:desktop-linux
[+] Building 0.4s (3/3) FINISHED                                                 docker:desktop-linux
 => [mlflow internal] load build definition from Dockerfile                                      0.0s
 => => transferring dockerfile: 636B                                                             0.0s
 => [influx-configurator internal] load build definition from Dockerfile                         0.0s
 => => transferring dockerfile: 493B                                                             0.0s
 => ERROR [influx-configurator internal] load metadata for docker.io/library/python:3.10-slim    0.4s
------
 > [influx-configurator internal] load metadata for docker.io/library/python:3.10-slim:
------
failed to solve: python:3.10-slim: failed to resolve source metadata for docker.io/library/python:3.10-slim: error getting credentials - err: exit status 1, out: ``

This is where I am ending up now. After deleting containers from the first attempt.

[ruchan-ziya]

ruchanziya@FQPY9GJ6YY openstef-reference-master % /usr/bin/pgrep -q oahd && echo Yes || echo No Yes

ruchanziya@FQPY9GJ6YY openstef-reference-master % sysctl -a | grep machdep.cpu machdep.cpu.cores_per_package: 8 machdep.cpu.core_count: 8 machdep.cpu.logical_per_package: 8 machdep.cpu.thread_count: 8 machdep.cpu.brand_string: Apple M2

[joyshmitz]

@ruchan-ziya HI! Its working now all container is aarch64 or arm64

sysctl -a | grep machdep.cpu

machdep.cpu.cores_per_package: 10
machdep.cpu.core_count: 10
machdep.cpu.logical_per_package: 10
machdep.cpu.thread_count: 10
machdep.cpu.brand_string: Apple M2 Pro

cd openstef-reference
docker compose up

then

docker compose ps
NAME                            IMAGE                           COMMAND                  SERVICE      CREATED              STATUS              PORTS
mlflow                          openstef-reference-mlflow       "/bin/sh -c 'mlflow …"   mlflow       About a minute ago   Up About a minute   0.0.0.0:8099->8099/tcp
openstef-grafana                grafana/grafana:11.2.0-ubuntu   "/run.sh"                grafana      About a minute ago   Up About a minute   0.0.0.0:3000->3000/tcp
openstef-mysql                  mysql:8.3                       "docker-entrypoint.s…"   mysql        About a minute ago   Up About a minute   0.0.0.0:3306->3306/tcp, 33060/tcp
openstef-nginx                  nginx                           "/docker-entrypoint.…"   nginx        About a minute ago   Up About a minute   0.0.0.0:8090->80/tcp
openstef-phpmyadmin             phpmyadmin                      "/docker-entrypoint.…"   phpmyadmin   About a minute ago   Up About a minute   0.0.0.0:8080->80/tcp
openstef-reference-influxdb-1   influxdb:2.7.5-alpine           "/entrypoint.sh infl…"   influxdb     About a minute ago   Up About a minute   0.0.0.0:8086->8086/tcp

[joyshmitz]

@ruchan-ziya a shortcut to define the architecture of containers in the terminal is this script, checked on a Mac mini with M2

./container-arch.sh
Container: mlflow, Architecture: arm64
Container: openstef-phpmyadmin, Architecture: arm64
Container: openstef-nginx, Architecture: arm64
Container: openstef-mysql, Architecture: arm64
Container: openstef-grafana, Architecture: arm64
Container: openstef-reference-influxdb-1, Architecture: arm64

#!/bin/bash

# Get the list of running containers
containers=$(docker ps -q)

# Check if there are any running containers
if [ -z "$containers" ]; then
  echo "No running containers."
  exit 0
fi

# Check the architecture of each container
for container in $containers; do
  # Get the container name
  container_name=$(docker inspect --format '{{.Name}}' "$container" | sed 's/^\///')

  # Get the image ID or name on which the container is based
  image_id=$(docker inspect --format '{{.Config.Image}}' "$container")

  # Get the architecture of the image
  architecture=$(docker image inspect --format '{{.Architecture}}' "$image_id" 2>/dev/null)

  # Check if the architecture is available
  if [ -z "$architecture" ]; then
    echo "Container: $container_name, Architecture not found."
  else
    echo "Container: $container_name, Architecture: $architecture"
  fi
done