search

PaxInstruments / t400-electronics

Electronics for the Pax Instruments T400 temperature datalogger
20 stars 9 forks source link

LCD connector 1.0 mm footprint #137

Closed charlespax closed 9 years ago

charlespax commented 9 years ago

We need a footprint for an appropriate LCD connector for the LCD with a 1.0 mm pitch cable. The one in the image below should be good, but we need it to be 12 pins.

screen shot 2015-01-16 at 14 35 46

samchoy88 commented 9 years ago

Original LCD it has 12 pins only. However you are replacing this component by 16 pins (1mm) Pitch connector. Please kindly advice the signal assignment on new 16 pins 1mm Pitch connector connector.

image

charlespax commented 9 years ago

The connector is 12 pins. The 16 pin connector is a good template from which you can make a new connector.

samchoy88 commented 9 years ago

OK, I follow this part number dimension for reference P/N: FH12-12S-1SH

image

charlespax commented 9 years ago

We have four samples of the new LCDs, so we'll have them for Electronics version 0.10. Moving to the Electronics version 0.10 milestone.

samchoy88 commented 9 years ago

Both of the 1mm and 0.5 mm connector are in the PCB now. See #140 image

charlespax commented 9 years ago

It's in Github. Closing issue. screen shot 2015-01-25 at 22 16 48

charlespax commented 9 years ago

We should remove the 0.5 mm footprint when we have the custom LCD production run. See https://github.com/PaxInstruments/t400-electronics/issues/141.

charlespax commented 8 years ago

See also https://github.com/PaxInstruments/t400-electronics/issues/162