PoplavskyiB
commented
1 month ago Thank you, I got it. I will solve these problems then
ср, 7 авг. 2024 г., 07:17 SugarK @.***>:
incase you haven't looked at these we recommend following the ideas in this https://betaflight.com/docs/development/manufacturer/manufacturer-design-guidelines
also any open source design should conform to our connector standards https://betaflight.com/docs/development/manufacturer/connector-standard
and lastly you need to feed the 42688 from its own 3.3v supply. it works great but not on a shared supply. the m6k can handle it but regardless its not a good practice for any of the newer gyros..
— Reply to this email directly, view it on GitHub https://github.com/PoplavskyiB/Sowa_FC/issues/1, or unsubscribe https://github.com/notifications/unsubscribe-auth/BH364OVSLWWNNBQV6CC5R33ZQGNUNAVCNFSM6AAAAABMDSBDZ6VHI2DSMVQWIX3LMV43ASLTON2WKOZSGQ2TEMZRGE3DIMY . You are receiving this because you are subscribed to this thread.Message ID: @.***>
incase you haven't looked at these we recommend following the ideas in this https://betaflight.com/docs/development/manufacturer/manufacturer-design-guidelines
also any open source design should conform to our connector standards https://betaflight.com/docs/development/manufacturer/connector-standard
and lastly you need to feed the 42688 from its own 3.3v supply. it works great but not on a shared supply. the m6k can handle it but regardless its not a good practice for any of the newer gyros..