search

QIDITECH / QIDI_PLUS4

QIDI TECH X-Plus 4
GNU Affero General Public License v3.0
21 stars 1 forks source link

Plus4_V1.6.0 Version Release broke the octoeverywhere connection in ORCASlicer #37

Open nilsolovp opened 5 days ago

nilsolovp commented 5 days ago

Orca slicer can`t use my octoeverywhere connection after the update to Plus4_V1.6.0 Version Release. I have no problem connecting and uploading a file thru the connection but the fluid interface function (devices) is broken.

nilsolovp commented 5 days ago

It seems to be the fluid interface all together that doesn't work. Not simply a octoeverywhere issue.

QIDITECH commented 4 days ago

Please try reinstall octoeverywhere.

nilsolovp commented 4 days ago

It wasn’t the octoeverwhere that was the issue after all. It’s fluid that doesn’t work.

what can I do to reinstall the 1.6.0 firmware again?

nilsolovp commented 3 days ago

Well I found out that I only needed a freshly prepare usb drive with the update for the printer to accept it and do a new try of installing the firmware. Unfortunately I still have no access to fluid. Not over local network, not thru octoeverywhere.

QIDITECH commented 3 days ago

From the current situation, the most likely will come from octoeverywhere. We will try to reproduce the problem. And what happens if you connect to fluidd over a LAN? Please take a screenshot and tell me.

nilsolovp commented 3 days ago

Over lan I can reach Fluid login page and enter my credentials. Then I reach a blank page with fluid logo and drop down menu. However there is nothing there.

Same issue with quidi link. I reach a blank page.

Mobileraker can however control everything that’s built in this app. And this connection is over octoeverywhere.

QIDITECH commented 2 days ago

It seems klipper and moonraker are working fine, only fluidd is abnormal. Please contact after-sales service to obtain the system image file and installation method.